基于FPGA反射式激光双速测量系统的设计与实现

物体在运动时旋转,可以减小物体运动过程中的空气阻力,增加运动运动稳定性,提高发射效率。而在一些发射系统中,弹丸在运动的过程中,也会发生旋转。通过测量弹丸的旋转速度和运动速度,可以更好的了解弹丸运动规律、调控运动行为,获取即时环境信息。文中提出了一种高灵敏度反射式测速系统,该测速系统采用高速响应数字激光传感器作为测量器件,采用FPGA编程进行控制和运算,具有抗低频电磁干扰的优点。应用该测速系统可以同时测量电磁发射系统中弹丸在出口处的水平运动速度和旋转速度。     

一种电流型超导储能脉冲变压器的放电模式

本文针对高温超导电感储能脉冲变压器(HTSPPT)提出了一种振荡放电模式.该模式中HTSPPT的原边绕组电感与电容器组成振荡回路,放电时原边电流通过该振荡回路使电流变化量增加,使得副边绕组感应出更大的电流脉冲.在放电过程中,电容器作为能量转换器件可实现开关的零电压关断,避免了断路开关出现过电压的问题.本文对振荡放电模式的工作原理进行了理论分析,利用一个小型HTSPPT搭建了小型实验系统,成功实现了从电流100A到3.78kA的放大,证明了的该放电模式的可行性.     

钙和铈二元掺杂对钇钡铜氧超导体性能的影响

超导储能脉冲功率系统中,关键的电路元件是断路开关,它的关断性能直接决定了输出脉冲的特性,传统的直接截流断路方法不仅会产生大电弧影响关断损耗,还会在断路瞬间产生高峰值的过电压脉冲.针对直接截流方法的缺点,本文提出了一种基于混合脉冲变压器(HPPT)工作模式的新型开关断路方法,该方法采用电流过零瞬时断路方式换流.经过理论分析和仿真,验证了该方法的正确性与可行性,对同类开关断路技术的研究提供了十分重要的参考依据.     

Transmission-type reconfigurable metasurface for linear-to-circular and linear-to-linear polarization conversions

We present a transmission-type polarization conversion metamaterial (PCM) whose functions can be dynamically switched among the linear-to-circular (LTC) and linear-to-linear (LTL) polarization conversions. The proposed PCM consists of a grating, a polarization conversion surface and a reconfigurable polarization selective surface incorporated with PIN diodes. By changing the states of diodes, the PCM can achieve the reconfigurable manipulations for incident waves. The Fabry-Pérot (F-P) resonances excited by the PCM contribute to the polarization conversions, as is illustrated. Moreover, through establishing the F-P-like cavity model and analyzing the electric field components of the transmitted waves, the conditions for realizing LTC polarization conversion are revealed, which can guide the construction of PCM. The prototype of PCM is fabricated and measured, which can achieve LTC and LTL polarization conversions within 3.31-3.56 GHz and 2.76-4.24 GHz, respectively, the polarization conversion ratios of two functions are higher than 0.95. The measurement results are in agreement with the simulation data.     

小型NbTi磁体的失超传播特性研究

针对小型实验NbTi超导磁体,通过建立螺线管线圈正常态区域传播的数学模型来定性描述其三维传播特性,并就磁体失超的实验波形做深入分析,阐述绕组匝间及层间的热传导效应对磁体失超传播速度的影响,掌握实验磁体失超过程中的内阻变化曲线,为磁体的失超信号检测与保护奠定良好的理论基础。     

YBCO高温超导磁体临界电流密度快速确定方法

基于绘图法基本原理,以及YBCO高温超导带材的临界电流特性,采用有限元电磁场分析软件AnsoftMaxwell建立了空心圆柱磁体模型.根据磁场分布、并考虑到带材的临界电流密度随磁场大小和方向的变化关系,给出了影响磁体工作电流特性的磁场的分布.基于以上工作提出了一种利用Ansoft电磁场分析软件快速确定YB-CO高温超导带材临界电流密度的方法.     

Design of a low-frequency miniaturized piezoelectric antenna based on acoustically actuated principle

An acoustically actuated piezoelectric antenna is proposed for low frequency (LF) band in this paper. The proposed antenna is theoretically calculated, numerically optimized by the finite element method (FEM), and experimentally analyzed. The measurement results show that the near-field radiation pattern of the piezoelectric antenna is similar to that of the electric dipole antenna. The radiation efficiency of the piezoelectric antenna is 3－4 orders of magnitude higher than that of electrically small antenna (ESA), with their sizes being the same size, and the maximum transmission distance obtained experimentally is 100 cm, which can be improved by increasing the input power. In addition, the gain, directivity, and quality factor of piezoelectric antenna are also analyzed. In this paper, traditional antenna parameters are creatively used to analyze the performance of piezoelectric antenna. The research conclusions can provide reliable theoretical basis for realizing LF antenna miniaturization.     

高温超导带材Bi-2223/Ag的焊接接头电阻研究

针对高温超导带材Bi-2223/Ag的焊接问题进行了研究.利用ANSYS建立焊接接头电阻特性的有限元计算模型,仿真和计算分析了焊料材料、搭接长度和焊锡层厚度对接头电阻值的影响,并进行了实验验证.实验表明:可通过减少焊料厚度,增加焊接搭接长度来减少接头电阻,当焊接长度在2～5cm,焊料厚度为0.5mm时,Bi-2223/...