On lower iteration complexity bounds for the convex concave saddle point problems

Mathematical Programming - In this paper, we study the lower iteration complexity bounds for finding the saddle point of a strongly convex and strongly concave saddle point problem: $$\min _x\max...     

High power diode single-end-pumped Nd:YVO4 laser

A fiber-coupled diode-single-end-pumped Nd:YVO₄ laser with an Nd:YVO₄ crystal of 0.3 at% doping concentration and 3×3×10 mm³ dimensions was reported. 14.850 W of continuous-wave output power in an M² factor of 1.12 was obtained under pump power of 27.365 W, with an optical conversion efficiency of 60.49%, and a slope efficiency of 64.5%.     

去溶温度对微波诱导等离子体原子吸收光谱法分析性能影响的研究

本文研究了超声雾化微波诱导等离子体原子吸收光谱法(UN-MIP-AAS)中,去溶温度对选择载气流量、微波前向功率等因素的影响,并定量考察了去溶效果。通过改善去溶条件,提高了UN-MIP-AAS的分析性能。     

原位插层聚合制备聚丁二烯/蒙脱土纳米复合材料的结构与性能研究

聚合物 /粘土纳米复合材料由于具有常规复合材料所没有的结构、形态及更优异的力学、热学、阻燃、阻隔等性能 ,自 1 987由日本丰田公司首次报道了制备尼龙 6 粘土纳米复合材料以来 ,立刻引起人们的普遍关注[1～ 17] .目前报道的聚合物 /粘土纳米复合材料主要集中在以树脂为基体 ,例如 ,聚酰胺[1～ 4] 、聚苯乙烯[5～ 8] 、聚甲基丙烯酸甲酯[9,10 ] 、聚丙烯[11,12 ] 等 .制备以橡胶为基体的橡胶/粘土纳米复合材料研究较少 ,采用的方法多为通过橡胶大分子插层 ,如熔融插层法[1 3] 、溶液插层法[14 ] 、乳液法[15,16] 等 ,这些方法均存在插层…     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).     

Structural assignment of regioisomeric 3-[2- or 5-anilino-2-(alkylamino)phenyl]propanoic acids, 2H-1,4-benzothiazin-3(4H)-ones and 2,3-dihydro-1,5-benzothiazepin-4(5H)-ones by 1D NOE and gHMBC NMR techniques

The 1H and 13C NMR spectra of compounds 1-11 and 16-22 in CDCl3 and DMSO-d6 solutions allowed structural assignment to regioisomers 1/5 and 2/6 and their regioselective cyclization products 16-18 utilizing one- and two-dimensional NMR techniques (APT, DEPT, NOE difference, COSY, NOESY, HETCOR and gHMQC, gHMBC). Temperature-dependent 1H NMR spectra of 8-anilino-5-(4-methyl-2-pentyl)-2,3-dihydro-1,5-benzothiazepin-4(5H)-one (18) indicated a free energy of activation (deltaG++) of ca 17 kcal mol(-1) for interconversion between rotamers. The 1H and 13C NMR spectra of 20 and 22 containing two chiral centers exhibit duplication of several signals, indicating the existence of two diastereomeric forms. The structure of 4 was unambiguously confirmed by x-ray crystallography.     

Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

An experimental study about the effect of arrangement on the fire behaviors of lithium-ion batteries

The gadolinium ferrochromite (GdFe_1?xCr_xO₃) was used as a case study of influence of chromium substitution on the perovskite structure in the entire composition range. By exploiting thermal analysis techniques (dilatometry, differential thermal analysis) the influence of chromium was investigated in the context of thermal stability of the canted antiferromagnetic ordering. It was found that the higher the chromium concentration was, the more the Néel temperature decreased, e.g., substitution of 26 % of iron atoms corresponded to a depression of about 60 K with respect to undoped gadolinium ferrite. For higher chromium concentrations the mixed gadolinium ferrochromite was paramagnetic at room temperature. Additional information on the crystal structure and, qualitatively, on the magnetic ordering as well was derived from the results of X-ray diffraction and Mössbauer spectroscopy measurements. For chromium content higher than 10 % the gadolinium ferrochromite may be regarded as a solid solution. For lower concentrations, however, a possible formation of clusters with different Fe/Cr ratio occurs as suggested by Mössbauer spectra.     

Reactive Dyeing of Electrospun Cellulose Nanofibers by Pad-steam Method

Based on the functional properties of electrospun cellulose nanofibers(CNF), scientists are showing substantial interest to enhance the aesthetic properties. However, the lower color yield has remained a big challenge due to the higher surface area of nanofibers. In this study, we attempted to improve the color yield properties of CNF by the pad-steam dyeing method. Neat CNF was obtained by deacetylation of electrospun cellulose acetate(CA) nanofibers. Three different kinds of reactive dyes were used and pad-steam dyeing parameters were optimized. SEM images revealed smooth morphology with an increase in the average diameter of nanofibers. FTIR results showed no change in the chemical structure after dyeing of CNF. Color fastness results demonstrated excellent ratings for reactive dyes, which indicate good dye fixation properties and no color loss during the washing process. The results confirm that the pad-steam dyeing method can be potentially considered to improve the aesthetic properties of CNF, which can be utilized for functional garments, such as breathable raincoats and disposable face masks.     

Thermal properties of chlorosulfonated polyethylene via gas–solid phase method

The thermal properties of chlorosulfonated polyethylene (CSM), which was prepared via gas–solid phase method, were studied in this article. The thermal curves were completely tested by differential thermal analysis, thermogravimetry, and differential thermogravimetry. The results showed that CSM 3550 and CSM 3570 prepared by gas–solid phase method had more excellent thermal properties (high initial/final temperature of degradation) than those via solution method, due to the uniform chlorine distribution of them in macromolecular chain. The differential scanning calorimetry curves showed that the transitions of CSM 3550 and CSM 3570 from glassy to the elastic state were also higher than those via solution method. Particularly, CSM 3570 was amorphous and no clear melting peak was observed during the melting process.