砂土串囊式充气锚杆承载力的研究

在砂土地层中,串囊式充气锚杆的研究还比较少,其承载特性及受力机理尚不明确。本文基于莫尔-库仑模型和Vesic圆孔扩张理论法,分别对圆柱体、球体、组合体、椭球体假设下的串囊式充气锚杆的扩大段进行计算分析。并将计算结果与试验得到的实测值进行对比。结果表明:四种形状假设中椭球体的形状假设理论值与实测值的误差最小,仅为8.35%。通过拟合试验数据,并引入与端阻力和侧摩阻力有关的两个系数对承载力公式进行修正,得到了抗拔承载力的经验公式。     

Liquid-Repellent Metal Oxide Photocatalysts

Metal oxide photocatalysts (MOPCs) decompose organic molecules under illumination. However, the application of MOPCs in industry and research is currently limited by their intrinsic hydrophilicity because MOPCs can be wetted by most liquids. To achieve liquid repellency, the surface needs to possess a low surface energy, but most organic molecules with low surface energy are degraded by photocatalytic activity. Herein, current methods to achieve liquid repellency on MOPCs, while preventing degradation of hydrophobic coatings, are reviewed. Classically, composite materials containing MOPCs and hydrophobic organic compounds possess good liquid repellency. However, composites normally form irregular coatings and are hard to prepare on surfaces such as those that are mesoporous or nanostructured. In addition, the adhesion of composites to substrates is often weak, resulting in delamination. Recent studies have shown that the direct grafting reaction of polydimethylsiloxane (PDMS) from silicone oil (methyl-terminated PDMS) under illumination results in a stable polymer brush. This easy and simple grafting method allows us to create stable liquid-repellent surfaces on MOPCs of various types, structures, and sizes. In particular, super-liquid-repellent drops with an underlying air layer can be created on PDMS-grafted nano-/microstructured MOPCs. Potential applications of surfaces combining liquid repellency and photocatalytic activity are also discussed; thus offering new ways of using MOPCs in a wider range of applications.     

Chemical equilibrium controlled synthesis of polyoxymethylene dimethyl ethers over sulfated titania

The chemical equilibrium and reaction kinetic behavior in the synthesis of polyoxymethylene dimethyl ethers(DMMn) were investigated over sulfated titania in order to reveal the decisive factor controlling the reaction. The results showed that the molar ratio of adjacent DMMn products in equilibrium solution had the same value, which depended absolutely on the reaction temperature. Meanwhile, the reactions had the same DMMn products distributions under varied reaction conditions. The equilibrium constants of the related step-wise reactions for DMMn formation were equal, which were calculated based on the bulk compositions of the reaction solution. And thus, the selectivity to DMMn was mainly controlled by the chemical equilibrium, i.e., thermodynamic control. In brief, the present results provide some guidance for future synthesis of DMMn.     

1200 V碳化硅功率MOSFET低温特性的实验表征及分析

碳化硅功率MOSFET是宽禁带功率半导体器件的典型代表,具有优异的电气性能。基于低温环境下的应用需求,研究了1200 V碳化硅功率MOSFET在77.7 K至300 K温区的静/动态特性,定性分析了温度对碳化硅功率MOSFET性能的影响。实验结果显示,温度从300 K降低至77.7 K时,阈值电压上升177.24%,漏-源极击穿电压降低32.99%,栅极泄漏电流降低82.51%,导通电阻升高1142.28%,零栅压漏电流降低89.84%(300 K至125 K)。双脉冲测试显示,开通时间增大8.59%,关断时间降低16.86%,开关损耗增加48%。分析发现,碳化硅功率MOSFET较高的界面态密度和较差的沟道迁移率,是导致其在低温下性能劣化的主要原因。     

Precisely Controlled Multidimensional Covalent Frameworks: Polymerization of Supramolecular Colloids

Rapid and selective removal of micropollutants from water is important for the reuse of water resources. Despite hollow frameworks with specific functionalized porous walls for the selective adsorption based on a series of interactions, tailoring a stable shape of nanometer- and micrometer-sized architectures for the removal of specific pollutants remains a challenge. Here, exactly controlled sheets, tubes, and spherical frameworks were presented from the crosslinking of supramolecular colloids in polar solvents. The frameworks strongly depended on the architecture of original supramolecular colloids. As the entropy of colloids increased, the initial laminar framework rolled up into hollow tubules, and then further curled into hollow spheres. These shape-persistent frameworks showed unprecedented selectivity as well as specific recognition for the shape of pollutants, thus contributing to efficient pollutant separation.     

Organosulfonate Counteranions—A Trapped Coordination Polymer as a High-Output Triboelectric Nanogenerator Material for Self-Powered Anticorrosion

Selection of the friction electrode materials is crucial to the performance of a triboelectric nanogenerator (TENG). In the present study, a metal–organic coordination complex containing organosulfonate counteranions with electron-donating ability was synthesized through the coordination-driven self-assembly approach under mild reaction conditions and was chosen as a positive electrode material to construct a triboelectric nanogenerator, exhibiting high-output performance with a peak value of short circuit current density of 98.6 μA and an output voltage of 1180 V. As a practical application, it was shown to light up 1488 commercial green LEDs and power an anticorrosion system device to protect metals from corrosion.     

Bromine-Functionalized Covalent Organic Frameworks for Efficient Triboelectric Nanogenerator

Covalent organic frameworks (COFs) enable precise integration of various organic building blocks into porous skeletons through topology predesign. Here, we report the first example of COFs by integrating electron withdrawing bromine group onto the skeletons for triboelectric nanogenerators (TENG). The resulting framework exhibits high surface area and good crystallinity. Thus, the bromine functionalized COF has more regular aligned π columns and arrays over the skeleton than bare COFs, which in turn significantly enhances charge transport ability. As a result, bromine functionalized COFs showed higher electrical output performance at 5 Hz with a peak value of short circuit current density of 43.6 μA and output voltage of 416 V, which is 2 and 1.3 times higher than those of bare COFs (21.6 μA and 318 V), respectively. These results demonstrated that this strategy for engineering electron withdrawing groups on the skeleton could open a new aspect of COFs for developing TENG devices.     

Reconstruction of Solid Electrolyte Interphase with SrI2 Reactivates Dead Li for Durable Anode-Free Li-Metal Batteries

Without excess Li, anode-free Li-metal batteries (AFLMBs) have been proposed as the most likely solution to realizing highly-safe and cost-effective Li-metal batteries. Nevertheless, short cyclic life puzzles conventional AFLMBs due to anodic dead Li accumulation with a local current concentration induced by irreversible electrolyte depletion, insufficient active Li reservoir and slow Li⁺ transfer at the solid electrolyte interphase (SEI). Herein, SrI₂ is introduced into carbon paper (CP) current collector to effectively suppress dead Li through synergistic mechanisms including reversible I⁻/I₃⁻ redox reaction to reactivate dead Li, dielectric SEI surface with SrF₂ and LiF to prevent electrolyte decomposition and highly ionic conductive (3.488 mS cm⁻¹) inner layer of SEI with abundant LiI to enable efficient Li⁺ transfer inside. With the SrI₂-modified current collector, the NCM532/CP cell delivers unprecedented cyclic performances with a capacity of 129.2 mAh g⁻¹ after 200 cycles.     

基于大科学装置的空间金属组学和单细胞/单颗粒金属组学

金属组学是综合研究生命体内（(特别是细胞内）)自由或络合的全部金属原子的分布、含量、化学种态及其功能的一门学科,而大科学装置为金属组学研究提供了强有力的工具。本综述本文首先介绍了金属组学发展简史,然后介绍了基于大科学装置的同步辐射技术、中子技术、质子技术及缪子技术等,最后概述了基于大科学装置的空间金属组学、单细胞/单颗粒金属组学的应用示例。基于大科学装置的中子活化技术（NAA）NAA、X-射线荧光光谱（XRF）以及质子激发X射线谱（PIXE ）等技术是开展非原位空间金属组学研究的有力手段,而XRF、PIXE以及缪子X射线荧光谱（MXA）为开展原位空间金属组学提供了有力工具,特别是基于XRF的技术,其空间分辨率可低至10 nm级别,是开展原位单细胞/单颗粒金属组学的利器。 新一代同步辐射光源、质子源及缪子源将为空间金属组学、特别是时空金属组学研究提供更强有力工具。     

Tailoring the polarity of polymer shell on BaTiO_3 nanoparticle surface for improved energy storage performance of dielectric polymer nanocomposites

Nanocomposites comprising flexible polymers and high dielectric constant inorganic nanoparticles are considered to be one of the promising candidates for electrostatic capacitor dielectrics.However,the effect of interfacial property on electrical ene rgy storage of dielectric polymer nanocomposites is still not clear.Herein,the role of the polarity of the interfacial region is investigated.For this purpose,three polymers with different polarity,polymethyl methacrylate(PMMA),polyglycidyl methacrylate,and polymethylsulfonyl ethyl methacrylate(PMSEMA) are attached onto BaTi03(BT) na noparticle surface via surface-initiated reversible addition-fragmentation chain transfer polymerization.It is found that the polarity of shell polymers shows an apparent effect on the dielectric and energy storage of dielectric polymer nanocomposites.For example,PMSEMA@BT(shell polymer possesses the highest polarity)increases dielectric loss and decreases the breakdown strength of the nanocomposites,leading to lower ene rgy storage capability.However,PMMA@BT(shell polymer possesses the lowest polarity) can induce higher breakdown strength of the nanocomposites.As a result,the PMMA@BT nanocomposite exhibits the highest electrical energy sto rage capability among the three nanocomposites.This re search provides new insight into the design of core-shell nanofillers for dielectric energy storage applications.