新型功能碳材料的高压截获

高性能功能材料在诸多领域具有广泛的应用前景,是人们一直关注的研究热点。高压可以有效地改变物质的原子间距和成键方式,是获得新型功能材料的重要途径。在碳材料的高压研究中,许多有趣的功能碳材料,如光学透明碳、高强度弹性碳和超硬非晶碳等,已经通过不同的碳前驱体合成。本文简要介绍了作者近年来在低维碳基纳米复合材料高压研究中取得的进展,基于设计的不同低维碳前驱体,高压下截获了具有超硬特性、新型压致共价聚合及发光增强的碳材料。     

Consistent treatment of inter- and intramolecular polarization in molecular mechanics calculations

A protocol is described for the treatment of molecular polarization in force field calculations. The resulting model is consistent in that both inter- and intramolecular polarization are handled within a single scheme. An analytical formula for removing intramolecular polarization from a set of atomic multipoles for an arbitrary static structure or conformation is given. With the help of the intramolecular polarization, these permanent atomic multipoles can then be applied in modeling alternative conformations of a molecule. Equipped with this simple technique, one can derive transferable electrostatic parameters for peptides and proteins using flexible model compounds such as dipeptides. The proposed procedure is tested for its ability to describe the electrostatic potential around various configurations of the N-methylacetamide dimer. The effect of different intramolecular polarization schemes on the accuracy of a force field model of the electrostatic potential of alanine dipeptide is investigated. A group-based scheme for including direct intramolecular polarization is shown to be most successful in accounting for the conformational dependence of electrostatic potentials.     

数字喷墨印刷关键技术及其实现

经过20多年的完善与发展，喷墨技术已经成为大幅面广告印刷行业的主要印刷技术。随着图书按需印刷需求的快速扩张以及国家环保政策的迅速落地，喷墨印刷技术作为一项高效环保的数字化印刷技术，得到越来越高的关注，业内普遍认为喷墨印刷技术将是数字化印刷的必然发展趋势。然而与已经成熟的多Pass喷墨印刷设备不同，单Pass喷墨印刷设备在数据带宽、数据在线重构、高精度同步控制、喷嘴在线补偿等方面有着极高的技术要求。本文首先简要介绍了喷墨技术，然后针对单Pass喷墨印刷设备需要解决的技术问题提出了相应的解决方案。依据本文技术设计的单Pass书刊喷墨印刷机已经投放市场，并且获得了用户的普遍认可。     

基于氧化石墨烯的长周期光纤光栅的全光控制

实验验证了一种通过将氧化石墨烯分散液沉积在长周期光纤光栅的全光控制的相关研究。通过外加的垂直泵浦光的作用,氧化石墨烯吸收泵浦光产生热量,改变长周期光纤光栅的包层模式的相位差,由于热膨胀的作用改变了氧化石墨烯所覆盖部分的光栅周期,使得谐振谱发生了移动,其最大调制深度可达10.6 dB,谐振谱最大可红移12.8 nm。通过实验发现,沉积相同浓度氧化石墨烯分散液的次数影响实验结果,通过在相同光栅的相同位置分别沉积三次,发现沉积三次可以在光纤表面获得更加均匀的氧化石墨烯膜,进行了时间响应的测试,其中沉积三次后的长周期光纤光栅的响应速度可达0.61 ms,沉积多次氧化石墨烯分散液可以在光纤表面沉积得更加平整均匀,从而获得更大的导热性能。     

二维CdO的低晶格热导率研究

寻求具有较小晶格热导率k_lat的高热电性能的二维材料具有重要意义。基于从头计算和声子玻耳兹曼输运理论,该研究首先对二维CdO结构进行优化,并通过计算声子谱验证了单层CdO的动力学稳定性。在此基础上详细研究了单层CdO的声子输运性质。计算表明在室温下单层CdO的晶格热导率k_lat约为5.7 W/(m·K),低于单层石墨烯、磷烯、黑磷和MoS₂等二维材料的晶格热导率。其中,Z方向声学模式(Z-direction acoustic, ZA),横声学支(transverse acoustic,TA),纵声学支(longitudinal acoustic, LA),Z方向光学模式(Z-direction optical, ZO),横光学支(transverse optical, TO),纵光学支(longitudinal optical, LO)对k_lat的百分比贡献分别为73.7％、13.9％、3.7％、2.8％、4.7％和1.2％。研究发现,ZA、TA、LA声学支和光学支之间的强散射是导致单层CdO低热导率的原因。本文计算结果可用于指导基于CdO的低维热电器件的设计。     

富氮多孔有机聚合物催化制备α⁃氰基肉桂酸乙酯

α-氰基肉桂酸乙酯作为含多种官能团的缺电子烯烃, 是一种极具应用价值的有机合成反应底物, 主要通过催化Knoevenagel缩合反应获得. 本文以多聚甲醛和三聚氰胺为前驱体, 采用溶剂热法制备富氮多孔有机聚合物mPMF, 经K₂CO₃处理得到K₂CO₃-mPMF-X(X=1, 10, 50). 考察了mPMF在苯甲醛和氰乙酸乙酯Knoevenagel缩合反应中的催化性能, 通过mPMF与K₂CO₃-mPMF-X催化活性的比较, 探讨了碱性强弱对Knoevenagel缩合反应的影响, 并对催化反应机理进行了探索. 结果表明, 催化剂中丰富的氮物种为反应提供了碱性环境和大量的碱性活性位点, 催化剂碱性强弱的控制是催化合成α-氰基肉桂酸乙酯的关键因素. mPMF在甲醇溶剂中于60 ℃反应3 h后, 苯甲醛转化率为97%, 目标产物选择性在99.9%以上.     

等级孔微孔-介孔Fe2O3/ZSM-5中空分子筛催化材料的制备及催化苄基化性能

ZSM-5分子筛具有极其均匀的孔道结构、 良好的形状选择性和催化活性及耐水热稳定性, 是一种高效、 绿色的固体催化剂, 被广泛应用于石油催化裂化、 精细化工和环境保护等领域. 但其单一的微孔结构大大降低了客体分子的流通扩散性, 导致由大分子参与的芳烃烷基化反应受到极大限制. 本文采用NaOH/四丙基氢氧化铵(TPAOH)混合碱处理微孔ZSM-5, 制备了具备高结晶度、 高比表面积的等级孔微孔-介孔ZSM-5中空分子筛材料, 该材料在保持微孔孔道良好水热稳定性和大量活性中心的同时, 还通过介孔的引入进一步促进反应物及产物的扩散, 使间三甲苯苄基化反应的转化率提高了3.8倍. 通过在等级孔微孔-介孔ZSM-5中空材料上负载Fe, 开发出了具有双功能的等级孔微孔-介孔Fe₂O₃/ZSM-5中空催化剂, 该催化剂在苯的苄基化反应中表现出优异的催化性能, 当Fe负载量(质量分数)为6.67%, 反应温度为75 ℃, 反应时间为15 min时, 转化率高达98.3%, 选择性为81.6%, 最终收率达到80.2%.     

Size-controllable carbon spheres doped Ni (II) for enhancing the catalytic oxidation of methanol

Ni(II)/CSs were prepared using a simple two-step hydrothermal method. The morphology and composition of the catalysts were studied with scanning electron microscope, transmission electron microscope, and X-ray diffraction. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the surface of the prepared carbon spheres was rich in hydroxyl groups, which was beneficial to remove CO intermediates, and therefore, improving the catalytic efficiency and the antipoisoning ability of the catalysts. The results of cyclic voltammetry and chronoamperometry showed that the electrocatalytic activity and stability of Ni(II)/CSs were higher than that of unloaded NiAc under alkaline environment. When the nickel content was 5 wt.%, the peak oxidation current density of methanol on Ni(II)/CSs electrocatalyst reached the maximum of 34.54 mA/cm², which was about 1.8 times that of unloaded NiAc. These results indicate that Ni(II)/CSs has potential applications in the electrocatalytic oxidation of methanol.     

Co3O4 Decorated Ti/TiO2 Nanotubes for Photogenerated Cathodic Protection of 304 Stainless Steel

The Co₃O₄ decorated TiO₂ nanotube arrays(NTAs) coatings are fabricated by the combination of anodization and impregna-ting methods. It is found that the introduction of Co₃O₄ can reduce the diffraction intensity of (101) plane of the TiO₂ and accelerate the separation of photogenerated electron/hole pairs. In addition, the open circuit potential(OCP) and the corrosion potential of 304 stainless steel(304SS) with or without Co₃O₄ decorated TiO₂ NTAs were measured under visible light, which indicated the 304SS coupled with Co₃O₄ decorated TiO₂ NTAs had better anticorrosion performance than that of the 304SS or the 304SS coupled with pure TiO₂ NTAs. The enhancement of the cathodic protection performance of the Co₃O₄ decorated TiO₂ NTAs can be ascribed to the matched energy levels and strong interaction between Co₃O₄ and TiO₂ NTAs, and the improvement of light absorption.     

SU-8光刻胶应变分布光学全场检测方法

由于SU-8光刻胶的内应力将会影响高深宽比结构的全金属光栅的制作质量,本文针对近年来SU-8光刻胶应力测量困难的情况,提出了一种基于激光剪切散斑干涉技术的SU-8光刻胶应变分布测量的新方法。该方法通过对被测胶体加载前后两幅干涉图像的处理,直接得到被测胶体结构的全场应变分布情况,由胶体的应变变形数据即可反映出内应力的变化和分布趋势。同时使用ANSYS有限元分析软件对同一被测胶体进行应变仿真模拟研究,获得胶体结构的变形场仿真数据。组建了实验系统,进行了实验验证,结果表明:实际测量变形量约为1.189μm,仿真的最大变形量为1.088μm,测量误差在允许范围内,且测量的形变趋势与仿真模拟结果相一致,表明激光剪切散斑干涉技术可应用于SU-8光刻胶的应变分布全场无损检测。