Radial flow velocity profiles of a yield stress fluid between smooth parallel disks

In rock grouting, idealized 2D-radial laminar flow of yield stress fluids (YSF) is a fundamental flow configuration that is used for cement grout spread estimation. A limited amount of works have presented analytical and numerical solutions on the radial velocity profiles between parallel disks. However, to the best of our knowledge, there has been no experimental work that has presented measured velocity profiles for this geometry. In this paper, we present velocity profiles of Carbopol (a simple YSF), measured by pulsed ultrasound velocimetry within a radial flow model. We describe the design of the physical model and then present the measured velocity profiles while highlighting the plug-flow region and slip effects observed for three different apertures and volumetric flow rates. Although the measured velocity profiles exhibited wall slip, there was a reasonably good agreement with the analytical solution. We then discuss the major implications of our work on radial flow.

     

Novel polyaniline-LiNi0.5La0.02Fe1.98O4 nanocomposites prepared via an in situ polymerization

Polyaniline (PANI)-LiNi_0.5La_0.02Fe_1.98O₄ nanocomposites were synthesized by an in situ polymerization of aniline in the presence of LiNi_0.5La_0.02Fe_1.98O₄ ferrite. The products were characterized by Fourier transform infrared (FTIR), atomic force microscopy (AFM), powder X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). FTIR spectra and XRD indicated the formation of the PANI-LiNi_0.5La_0.02Fe_1.98O₄ composites. AFM study was shown that the average size of samples was less than 100 nm and the ferrite particles had an effect on the morphology of composites. The nanocomposites under applied magnetic field exhibited the hysteresis loops of the ferrimagnetic nature, the saturation magnetization and the coercivity varied with the ferrite content. The bonding model for the composites was also studied.     

回旋加速器束测探头感生放射性实验研究

基于束流沉积法测量回旋加速器内部束流参数将在束测探头上产生感生放射性污染,从而对加速器调束工作人员带来不必要的辐射危害。采用AGM-6型监测仪对探头感生放射性进行在线测量,通过测量不同半径处探头受辐射后的空气比释动能率,间接反映探头感生放射性的强弱和危害。研究结果表明,在束流调试实验中,应尽量降低馈入高频的占空比;探头测量后冷却2~3 h取出,则不需要考虑测量探头辐照后的残留感生放射性的危害。     

四苯基卟啉衍生物半波电位与ELUMO间关系的研究

用ＣＮＤＯ／２和ＨＭＯ方法计算了四苯基卟啉及其吡咯环取代的衍生物,配合物的轨道能级等量子化学数据。经拟合发现这些化合物的半波电位与最低空轨道能级有很姨的相关性。讨论了不同取代基团对这些化合物半波电位的影响。     

分级结构氧化锌的制备及形貌调控

以单一和混合锌盐为锌源, 氢氧化钠为沉淀剂, 丙氨酸和离子液体(IL)为表面活性剂, 通过水热法制备了不同形貌的分级结构氧化锌粉末. 通过X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 红外光谱仪(IR)和紫外-可见分光光度计(UV-Vis)对样品进行了表征, 并探讨了锌源(单锌盐、 混合双锌盐及三锌盐)、 离子液体种类及用量、 丙氨酸用量和温度等变量对产物形貌的影响, 推测了在分级结构氧化锌形成过程中阴离子对样品形貌的调控作用.     

聚苯胺/聚丙烯酰胺/镍锌铜铁氧体复合物的制备及电磁性能

采用溶液聚合法制备了聚苯胺/聚丙烯酰胺/镍锌铜铁氧体(PANI/PAM/Zn0.4Ni0.5Cu0.1Fe2O4)三元复合物. 利用X射线衍射仪、红外光谱仪、扫描电子显微镜和振动样品磁强计分别表征了样品的结构、形貌和磁性能, 用阻抗/材料分析仪测定了复合物在1 MHz～1 GHz的频率范围内的磁损耗和介电损耗, 并研究了聚苯胺和引发剂的相对含量对复合物的磁损耗和介电损耗的影响. 结果表明复合物中磁性粒子和聚合物之间具有一定的相互作用, 复合物在1 MHz～1 GHz的频率范围内具有较大电磁损耗能力.     

硼协同掺杂金刚石单晶的高温高压合成

金刚石是一种具有优异性能的极限性超硬多功能材料。人工合成的金刚石可通过掺杂的方式使其具有各种独特的性质。掺硼金刚石兼具p型半导体的导电特性和金刚石自身优良的物理和化学性能,在国防、医疗、勘探、科研等领域具有极高的应用价值。本文基于本课题组高温高压(HPHT)法合成的系列掺硼金刚石以及硼协同掺杂金刚石单晶,进行了硼掺杂金刚石、硼氢协同掺杂金刚石以及硼氮协同掺杂金刚石的合成和性能特征等方面的研究。通过表征合成样品在光学、电学方面的性能,探讨了不同掺杂添加剂对合成金刚石性能的影响,为合成高性能的半导体金刚石提供了思路。     

取代环己硅烷类(苯基乙烷和联苯基乙烷系列)液晶化合物分子的基本性质的量子化学研究

取代环己硅烷类液晶化合物是以专利形式报道的一类新型液晶材料.它们具有能降低液晶的粘度和双折射率,使液晶显示器件的响应速度增快,视角变宽等优良性能,可满足在低温下正常工作的要求,具有良好的应用前景[1].关于该类化合物的分子结构和基本性质的实验和理论研究的报道并不多见.因此,开发优良的分子轨道计算方法研究液晶化合物的结构和性质的关系已成为理论化学家们关注的课题,其中,AM1[2]法和PM3[3]法是目前被较多地用于这类研究的半经验分子轨道近似计算方法.     

Numerical simulation of hydrodynamics in an uncovered unbaffled stirred tank

Numerical simulations were carried out to investigate the turbulent flow with free-surface vortex in an uncovered unbaffled stirred tank. An Eulerian–Eulerian multiphase flow model coupled with a volume-of fluid method was applied to capture the gas–liquid interface and describe the flow field in the tank. Turbulence is computed using a Reynolds stress model with seven equations. The reliability and accuracy of the simulations are verified by comparing the predicted free surface profiles and power numbers with experimental data in the literature. The overall agreements between the simulation results and experimental measurements are obtained. The simulation results show that vortex on the liquid free surface in the uncovered unbaffled tank can be divided into central zone and peripheral zone, and the critical radius of the two zones keeps almost unchanged with enhancing of impeller speeds. At the same impeller speed, vortex becomes deeper and larger with increasing of impeller diameter. However, vortex shape changes not very much with increasing of impeller diameter under the same power consumption. Impeller clearance has no significant influence on the vortex shape. Circumferential flow is dominant in the uncovered unbaffled tank, and the flow field can be divided into forced vortex region and free vortex region. Power numbers in uncovered unbaffled stirred tanks decrease slightly with increasing of the Reynolds number, and are far lower than that in baffled stirred tanks.     

硅磁微粒/聚苯胺复合物的制备及其对染料废水的吸附-降解性能

通过水热法制备碳微球、共沉淀法制备空心Zn Fe2O4和原位聚合法制备Zn Fe2O4/Si O2/PANI复合物,并表征其结构、形貌、组成和性质.结果表明,Si O2对铁氧体的包覆能提高二元复合物对染料废水的降解性能;铁氧体与二氧化硅物质的量比(nZn Fe2O4/nSi O2)为1:3的Zn Fe2O4/Si O2复合物对染料废水具有较好的降解作用;Zn Fe2O4/Si O2/PANI复合物对染料废水的光催化降解活性随苯胺质量分数(wAn)的增加而增大,当wAn为50%时,Zn Fe2O4/Si O2/PANI复合物对染料废水去除率高达98%.样品因具有磁性而回收方便,重复使用性能良好.