High-performance nonfused ring electron acceptor with a steric hindrance induced planar molecular backbone

Three nonfused ring electron acceptors (NFREAs) TTC6,TT-C8T and TT-TC8 were purposefully designed and synthesized.The molecular geometry can be adjusted by the steric hindrance of lateral substituents.According to the DFT calculations,from TTC6 to TT-C8T and TT-TC8,planarity of the molecular backbone is gradually improved,accompanying with the enhancing of intramolecular charge transfer effect.As for TT-TC8,the two phenyl substituents are almost perpendicular to the molecular backbone,which endues the acceptor with good solubility and suppresses it to form over-aggregation.Multidirectional regular molecular orientation and closer molecular stacking are formed in TT-TC8 film.As a result,TT-TC8 based devices afford the highest PCE of 13.13%,which is much higher than that of TTC6 (4.41%) and TT-C8T (10.42%) and among the highest PCE values based on NFREAs.     

A novel LC–MS/MS method for the determination of ziritaxestat in rat plasma and its pharmacokinetic study

Ziritaxestat is a first-in-class autotoxin inhibitor. The purpose of this study was to develop a liquid chromatography/electrospray ionization tandem mass spectrometric (LC–MS/MS) method for the determination of ziritaxestat in rat plasma. The plasma sample was deproteinated using acetonitrile and then separated on an Acquity BEH C₁₈ column with water containing 0.1% formic acid and acetonitrile as mobile phase, which was delivered at 0.4 ml/min. Ziritaxestat and the internal standard (crizotinib) were quantitatively monitored with precursor-to-product transitions of m/z 589.3 > 262.2 and m/z 450.1 > 260.2, respectively. The total running time was 2.5 min. The method showed excellent linearity over the concentration range 0.5–2000 ng/ml, with correlation coefficient >0.9987. The extraction recovery was >82.09% and the matrix effect was not significant. Inter- and intra-day precisions (RSD) were <11.20% and accuracies were in the range of −8.50–7.45%. Ziritaxestat was demonstrated to be stable in rat plasma under the tested conditions. The validated LC–MS/MS method was successfully applied to study the pharmacokinetic profiles of ziritaxestat in rat plasma after intravenous and oral administration. Pharmacokinetic results demonstrated that ziritaxestat displayed a short half-life (~3 h) and low bioavailability (20.52%).     

两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries

Flexible lithium/sulfur (Li/S) batteries are promising to meet the emerging power demand for flexible electronic devices. The key challenge for a flexible Li/S battery is to design a cathode with excellent electrochemical performance and mechanical flexibility. In this work, a flexible strap-like Li/S battery based on a S@carbon nanotube/Pt@carbon nanotube hybrid film cathode was designed. It delivers a specific capacity of 1145 mAh g⁻¹ at the first cycle and retains a specific capacity of 822 mAh g⁻¹ after 100 cycles. Moreover, the flexible Li/S battery retains stabile specific capacity and Coulombic efficiency even under severe bending conditions. As a demonstration of practical applications, an LED array is shown stably powered by the flexible Li/S battery under flattened and bent states. We also use the strap-like flexible Li/S battery as a real strap for a watch, which at the same time provides a reliable power supply to the watch.     

大范围ReS2纳米带的化学气相沉积制备及特性表征

采用化学气相沉积方法,在整个SiO2(300 nm)/Si衬底上制备出了大面积、高质量的单层及多层ReS2纳米带,纳米带的长度可达150μm.利用光镜、原子力显微镜(AFM)、荧光(PL),拉曼(Raman)以及X射线光电子能谱分析(XPS)等手段对所得不同层数的ReS2样品进行了表征.结果表明:所制备的ReS2纳米带的拉曼信号与化学气相沉积方法制备的(CVD)单层及多层的薄膜材料差别不大,而其荧光峰出现了明显的展宽,且峰位出现了明显的蓝移.化学气相沉积法(CVD)制备ReS2纳米带操作简单,可控性与可重复性高,对其基础研究和未来潜在应用有着比较重要的现实意义.     

Nb(iPrNPMe2)3Fe–PMe3: A potential high reactivity heterobimetallic catalyst for acetylene cycloadditions

Alkynes cycloaddition reactions are powerful tools for constructing cyclic molecules with optimal atom efficiency, but these reactions cannot proceed at ambient temperature without transition-metal catalysts. In this work, a heterobimetallic complex featuring an Nb–Fe triple bond, Nb(ⁱPrNPMe₂)₃Fe–PMe₃, has been evaluated as the potential catalyst for acetylene cycloaddition, using density functional theory. The calculated results show that the singlet-state (i.e. ground-state) Nb(ⁱPrNPMe₂)₃Fe–PMe₃ can be applied to benzene synthesis, but is not suitable for cyclobutadiene. Benzene can be obtained easily at room temperature and is the unique product on the singlet potential surface. The irradiation of infrared-red light can drive the excitation of singlet Nb(ⁱPrNPMe₂)₃Fe–PMe₃ to its triplet state. Both benzene and cyclobutadiene can be formed on the triplet reaction potential surface due to their low energy barriers. Therefore, Nb(ⁱPrNPMe₂)₃Fe–PMe₃ is a potential high reactivity heterobimetallic catalyst for the cyclotrimerization of alkynes. In the reaction process, the catalytic active site of Nb(ⁱPrNPMe₂)₃Fe–PMe₃ moves from niobium to iron.     

熔盐法合成钛酸锂钾片晶及形貌控制

在碳酸钾、碳酸锂和二氧化钛的混合原料中加入熔盐氯化钾,通过高温煅烧一步制备出钛酸锂钾片晶( K0.8 Li0.27Ti1.73O4, KLTO).通过控制熔盐的添加方式以及煅烧工艺(升温速率、煅烧时间)使材料的形貌朝着二维方向生长,并利用XRD和SEM等手段进行表征.分析发现:过快的升温速率或者较短的煅烧时间都会使材料朝三维方向生长成球状或者块状,反之则会使材料趋向一维方向生长成棒状;同时在煅烧温度达到一定值时再加入熔盐则更有利于片晶的生成.最终得到KLTO片状形貌的最佳控制工艺为:先以300 ℃/h升温至800 ℃后,再加入质量分数为40;的KCl熔盐,接着将升温速率变为200 ℃/h,加热至950 ℃,并在此温度下煅烧3 h.     

基于PI法的门源MS6.4地震前震中附近地震热点图像异常变化研究

基于1980年以来青海省和甘肃省区域地震台网的定位地震目录，分析了研究区最小完备震级，选取空间网格尺度为0.2°×0.2°、地震活动异常学习时间段和预测时间段均为3 a，应用图像信息（PI）法，分析了门源M_S6.4地震发生前震中附近地震热点图像的异常变化过程。结果表明，在2013年1月1日至2016年1月1日的预测时间窗内，冷龙岭断裂和祁连山北缘断裂附近存在明显的地震热点，且地震热点图像颜色偏深，发震概率较高，向前滑动至2014年1月1日至2017年1月1日，2015年1月1日至2018年1月1日和2016年1月1日至2019年1月1日3个预测时间窗，此两断裂附近仍存在地震热点，地震热点图像颜色逐渐由深变浅，而门源M_S6.4地震就落在PI法得到的地震热点内。门源M_S6.4地震前存在明显的地震热点，且地震热点相对集中，地震热点图像颜色由深变浅，震后消失；在祁连山北缘断裂附近，地震热点持续存在，分布较集中，地震热点图像颜色也呈由深变浅的过程。未来需关注祁连山北缘断裂，附近有发生强震的可能。     

旋涂法制备掺杂BiOX薄膜及光催化性能研究

采用旋涂的方法在基底材料表面原位生长BiOX(X=C1、Br、I)薄膜材料.样品的晶体结构和光学性质等通过X射线粉末衍射(XRD)、透射电子显微镜(TEM)、紫外可见漫反射光谱(UV-Vis)进行了表征.结果表明旋涂法制备的BiOX薄膜是纯净的,无其他杂质,均匀性好.通过对BiOX薄膜材料的光催化性能和瞬态表面光电压技术(TPV)进行了研究,发现卤素掺杂的BiOBr0.48I052具有较好的光催化性能.其结果表明催化性能提高的原因可能是BiOBr0.48I0.52薄膜在光照下可以产生更强的光生载流子并具有更长的光生载流子寿命.