On the Relative Twist Formula of l-adic Sheaves

We propose a conjecture on the relative twist formula of l-adic sheaves, which can be viewed as a generalization of Kato—Saito's conjecture. We verify this conjecture under some transversal assumptions. We also define a relative cohomological characteristic class and prove that its formation is compatible with proper push-forward. A conjectural relation is also given between the relative twist formula and the relative cohomological characteristic class.     

A DFT study on mechanisms of CO2 coupling with propargylic alcohols using alkali carbonates

The mechanisms of CO₂ coupling with the propargylic alcohol using alkali carbonates M₂CO₃ (M = Li, Na, K, Cs) have been investigated by means of density functional theory calculations. The calculations reveal that the target product tetronic acid (TA) is yielded through two stages: (a) the formation of the α-alkylidene cyclic carbonate (αACC) intermediate via Cs₂CO₃-mediated carboxylative cyclization of the propargylic alcohol with CO₂, and (b) the conversion of the αACC intermediate with Cs₂CO₃ to produce the cesium salt of the TA. Since the overall kinetic barriers for the two stages are comparable and affordable, the excellent chemoselectivity to the TA should be primarily originated from the high thermodynamic stability of the cesium salt of the TA. Moreover, relative to the TA, the possibility to yield the by-product acyclic carbonate can be excluded due to the both kinetics and thermodynamic inferiority. This result is different from the organic base-mediated reaction. Alternatively, our calculations predict that CsHCO₃ together generated with the cesium salt of the TA might also be an available mediating reagent for the incorporation of CO₂ with the propargylic alcohol. Compared to other alkali carbonates M₂CO₃ (M = Li, Na, K), the stronger basicity of Cs₂CO₃ and the lower ionic potential of cesium ion can raise the effective concentration of the αACC intermediate, and thus the conversion of the αACC intermediate into the cesium salt of the TA can be achieved with high yield.     

XY(H,Li,Na)分子基态的结构与势能函数

运用群论及原子分子反应静力学方法,推导了XY(H,Li,Na)分子基态的电子态及相应的离解极限.并采用密度泛函方法(B3LYP)和二次组态相互作用方法(QCISD)优化计算了XY(H,Li,Na)分子基态的平衡结构、振动频率和离解能.使用QCISD/6-311++G(3df,3pd)方法,对XY(H,Li,Na)分子基态进行了单点能扫描计算,采用最小二乘法拟合Murrell-Sorbie函数得到了相应的势能函数和与该基态相对应的光谱常数(Be,αe,ωe和ωexe),计算结果与实验数据符合得相当好.     

介质加载环板慢波结构高频特性研究

 提出了一种适用于环板结构的计算等效相对介电常数的方法，利用变分法导出了介质加载环板慢波结构的色散方程和耦合阻抗表达式。计算结果表明，介质加载能够有效降低环板慢波结构的工作电压。计算结果与CST-MWS的模拟结果吻合良好，说明所提出的计算等效相对介电常数的方法和计算色散方程的方法对环板慢波结构是切实可行的。     

提高微晶硅薄膜太阳电池效率的研究

采用甚高频等离子体增强化学气相沉积技术制备了系列微晶硅薄膜太阳电池，指出了气体总流量和背反射电极的类型对电池性能参数的影响.电池的I-V测试结果表明：随反应气体总流量的增加，对应电池的短路电流密度、开路电压和填充因子都有很大程度的提高，结果使得电池的光电转换效率得以提高.另外，ZnO/Ag/Al背反射电极能明显提高电池的短路电流密度，进而也提高了电池的光电转换效率.对气体总流量和背反射电极类型影响电池效率的原因进行了分析. 关键词： 微晶硅薄膜太阳电池 气体流量 ZnO/Ag/Al背反射电极     

时变线性系统特征根判稳的推广

本文研究了二维时变线性系统零解的稳定性，给出了一些允许系数矩阵主对角元变号，系数矩阵特征根变号的判定稳定性的充分条件。     

用于机械振动实时监测的光纤光栅有源传感装置

把一对中心反射波长分别为1562.11nm和1562.71nm的光纤光栅粘贴在均质、等厚、等腰三角形悬臂梁上下表面作为环形腔光纤激光器端镜，当机械振动激励自由端时，通过观测激光输出脉冲，地施加于自由端的机械振动的频率进行了实时监测；观察两光栅波长漂移量差值的变化，可在0～6.1mm的范围内判断所测振动的振幅。低于100Hz时，实验结果与实际值基本吻合。     

Optimal Control of Non-well-posed Heat Equations

This work is concerned with Pontryagin＇s maximum principle of optimal control problems governed by some non-well-posed semilinear heat equations. A type of approach to the non-well-posed optimal control problem is given.     

浮栅ROM器件辐射效应机理分析

分析了浮栅ROM器件的辐射效应机理，合理地解释了实验中观察到的现象.指出辐射产生的电子空穴对在器件中形成的氧化物陷阱电荷和界面陷阱电荷是导致存储单元及其外围电路出现错误的原因.浮栅ROM器件的中子、质子和⁶⁰Co γ辐射效应都是总剂量效应 . 关键词： FLASH ROM EEPROM 中子 质子 60Co γ')" href="#">⁶⁰Co γ 总剂量效应     

Direct numerical simulation of settling of a large solid particle during bioconvection

Settling of a large solid particle in bioconvection flow caused by gyrotactic microorganisms is investigated. The particle is released from the top of the bioconvection chamber; its settling pattern depends on whether it is released in the centre of the bioconvection plume or at its periphery. The Chimera method is utilized; a subgrid is generated around a moving particle. The method suggested by Liu and Wang (Comput. Fluid 2004; 33 :223–255) is further developed to account for the presence of a moving boundary in the streamfunction‐vorticity formulation using the finite‐difference method. A number of cases for different release positions of the particle are computed. It is demonstrated that bioconvection can either accelerate or decelerate settling of the particle depending on the initial position of the particle relative to the plume centre. It is also shown that the particle impacts bioconvection plume by changing its shape and location in the chamber. Copyright © 2005 John Wiley & Sons, Ltd.