A visual uncertainty analytics approach for weather forecast similarity measurement based on fuzzy clustering

Journal of Visualization - Forecast calibration methods based on historical similar atmospheric state are effective means weather forecast accuracy. Conventional approaches search similar forecasts...     

Comparison of different methodologies for the computation of damped nonlinear normal modes and resonance prediction of systems with non-conservative nonlinearities

Nonlinear Dynamics - The nonlinear modes of a non-conservative nonlinear system are sometimes referred to as damped nonlinear normal modes (dNNMs). Because of the non-conservative...     

Boundedness of Singular Integral Operators on Local Hardy Spaces and Dual Spaces

Potential Analysis - The purpose of this paper is to provide necessary and sufficient conditions of the boundedness for singular integrals on the local Hardy space and its dual. Particularly the...     

Effect of monomer hydrophilicity on ARGET–ATRP kinetics in aqueous mini-emulsion polymerization

Activators regenerated by electron transfer (ARGET) atom transfer radical polymerization (ATRP)-based aqueous miniemulsion polymerization where the polymerization takes place in the stabilized monomer droplets is described. In this work, we compared styrene, n-butyl methacrylate (nBMA) and tert-butyl methacrylate (tBMA) and investigated the influence of their hydrophobicity on dispersity, molecular weight and particle stability based their partition coefficients (logP) (2.67, 2.23, and 1.86, respectively). Tetrabutylammonium bromide (TBAB) was used as a phase transfer agent for the controlled delivery of Cu²⁺-Br/tris(2-pyridylmethyl)amine (TPMA), a hydrophilic catalyst, into monomer droplets of varying hydrophobicity. The resulting dispersity and particle stability of each polymer is a function of its logP value, with the most hydrophobic monomer (styrene) displaying the narrowest dispersity and most control (Đ < 1.3), and the most hydrophilic polymer poly(tert-butyl methacrylate) (PtBMA) having reduced emulsion stability, determined by the observation of aggregate formation. Selected polymerization parameters, including effects of total ascorbic acid feed concentration and the monomer concentration and their effects on dispersity are reported. The controlled polymerizations of hydrophilic monomers using ARGET-ATRP in miniemulsion conditions and understanding the effect of monomer hydrophilicity on the emulsion stability will broaden the use of ARGET-ATRP in emulsion polymerization for the synthesis of polymer-grafted nanoparticles with hydrophilic corona.     

Fully Chemical Recyclable Poly(γ-butyrolactone)-based Copolymers with Tunable Structures and Properties

Chinese Journal of Polymer Science - The emerging chemical recyclable polymers, such as poly(γ-butyrolactone) (PGBL) and poly((R)-3,4-trans six-membered ring-fused GBL) (P((R)-M)), provide a...     

Biotemplated Fabrication of ZnO Microstructures with Enhanced Photocatalytic Properties from Rape Pollen

Crystallography Reports - Sodium dodecyl sulfonate and rape pollen were selected as soft and hard templates to induce ZnO formation under hydrothermal conditions, respectively. In the preparation...     

Dynamic mechanism of epileptic seizures generation and propagation after ischemic stroke

Nonlinear Dynamics - Epilepsy is the second largest neurological disease which seriously threatens human life and health. The one important reason of inducing epileptic seizures is ischemic stroke...     

[Nb@Ge13/14]3−: New Family Members of Ge-Based Intermetalloid Clusters

During the past two decades, single-atom-centered medium-sized germanium clusters [M@Ge_n] (M=transition metals, n>12) have been extensively explored, both from theoretical perspectives and experimental gas-phase syntheses. However, the actual structural arrangements of the Ge₁₃ and Ge₁₄ endohedral cages are still ambiguous and have long remained an unresolved problem for experimental implementation. In this work, we successfully synthesize 13-/14-vertex Ge clusters [Nb@Ge₁₃]³⁻ ( 1 ) and [Nb@Ge₁₄]³⁻ ( 2 ), which are structurally characterized and exhibit unprecedented topologies, neither classical deltahedra nor 3-connected polyhedral structures. Theoretical analysis indicates that the major stabilization of the Ge backbones arises due to the substantial interaction of Ge 4p-AOs with the endohedral Nb 4d-AOs through three/four-center two-electron bonds with an enhanced electron density accumulated over the shortest Nb−Ge13 contact in 1 . Low occupancies of the direct two-center two-electron (2c–2e) Nb−Ge and Ge−Ge σ bonds point to a considerable degree of electron delocalization over the Ge cages revealing their electron deficiency.     

1,3-丁二烯选择性加氢催化剂的设计策略以及构效关系

催化裂化是石油化工的核心单元之一.从催化裂化尾气中分离出来的碳四馏分富含许多的不饱和烯烃,如1-丁烯、顺、反式-2-丁烯以及少量的1,3-丁二烯,这些不饱和烯烃可以通过后续聚合反应,生成合成橡胶和工程塑料的重要原料,具有重要的应用价值.上述工艺过程对原料中1,3-丁二烯的含量(<100~200 ppm)有严苛的要求.采用选择性加氢技术对碳四馏分中的1,3-丁二烯进行选择性加氢,将其转化为更高附加值的单烯烃是一个理想的解决方案.然而,1,3-丁二烯加氢反应得到的单烯烃可能发生深度加氢得到副产物丁烷.因此,开发高效选择性加氢催化剂对碳四资源的利用具有重要的现实意义.另一方面,1,3-丁二烯加氢反应可以作为模型反应,用来考察选择性加氢催化剂的性能.基于此,该反应无论在工业界还是学术界均受到广泛关注.尽管如此,有关1,3-丁二烯加氢催化剂研究进展方面的综述极少.仅有关于1,3-丁二烯加氢作为模型反应的综述报道.本文对过去半个世纪以来1,3-丁二烯加氢反应中不同催化剂的发展历程进行系统综述,特别是包括Pd,Pt和Au等的单一贵金属催化剂.重点介绍以下内容:(1)固体催化剂构效关系,包括活性金属尺寸效应、晶面和形貌效应以及载体效应(晶相、孔道和酸碱性);(2)高性能催化剂的设计新策略,如单原子催化剂、核壳结构催化剂、金属-离子液复合催化体系以及载体的形貌调控;(3)催化剂的反应机理和失活机理.提出了1,3-丁二烯选择性加氢高性能催化剂开发面临的挑战,并对潜在的发展方向进行了展望.本文认为随着纳米技术和金属纳米材料合成方法的快速发展,对贵金属活性组分进行原子层面上的调控(包括形貌、尺寸以及单原子配位环境等)已成为可能.这将有助于研制出一类新型高性能选择性加氢催化材料,从而实现高转化率条件下高附加值单烯烃的定向转化.此外,载体的酸碱性和孔道结构的调控有助于进一步调节催化剂的抗积炭性能,也是未来发展的一个重要方向.     

Auto-deposition of 210Bi and 210Po on nickel discs and their application in the analysis of natural waters

Journal of Radioanalytical and Nuclear Chemistry - This study presents a time-efficient method of analysing 210Pb, 210Bi, and 210Po in natural waters. The optimum pH (1.00), temperature...