Experimental study for adsorption and photocatalytic reaction of ethyl methylphosphonate molecule as organophosphorus compound adsorbed at surface of titanium dioxide under UV irradiation in ambient condition

The adsorption and photocatalytic degradation of Ethyl methylphosphonate (EMPA) on powdery TiO₂ film has experimentally investigated using attenuated total reflection-infrared Fourier transform spectroscopy (ATR-FTIR) in ambient condition. Characteristic IR frequency as P-O-C vibration mode as EtO was observed by EMPA adsorbed at the surface of TiO₂. By TiO₂ photocatalysis, the adsorbed EMPA was decomposed to methyl phosphonic acid and phosphoric acid. The increment of IR intensity of which is assigned to Ti–O-P-O-Ti of EMPA was accompanied with increasing the IR peak intensity assigned to MPA. About that, we suggest that the appearance of the Ti–O-P-O-Ti of EMPA by the TiO₂ photocatalysis is regarded as acceleration of the hydrolysis of EMPA by the surface OH groups of TiO₂. The plausible adsorption structure and the photocatalytic reaction mechanism of EMPA at the surface of TiO₂ photocatalyst were elucidated.

     

Striking Differences in Properties of Geometric Isomers of [Ir(tpy)(ppy)H]+: Experimental and Computational Studies of their Hydricities,Interaction with CO2, and Photochemistry

We prepared two geometric isomers of [Ir(tpy)(ppy)H]⁺, previously proposed as a key intermediate in the photochemical reduction of CO₂ to CO, and characterized their notably different ground‐ and excited‐state interactions with CO₂ and their hydricities using experimental and computational methods. Only one isomer, C‐trans‐[Ir(tpy)(ppy)H]⁺, reacts with CO₂ to generate the formato complex in the ground state, consistent with its calculated hydricity. Under photocatalytic conditions in CH₃CN/TEOA, a common reactive C‐trans‐[Ir(tpy)(ppy)]⁰ species, irrespective of the starting isomer or monodentate ligand (such as hydride or Cl), reacts with CO₂ and produces CO with the same catalytic efficiency.     

Tricolor photoviscoelastic technique and its application to moving contact

A new technique for simultaneous determination of both fringe order and principal direction of birefringence in practical photoviscoelastic analysis using white incident light with a set of the primary colors, called tricolor photoviscoelasticity, is described. This method can determine both the fringe order and principal direction of birefringence from a single-color photoviscoelastic image under plane polarization. Then, the authors evaluate time dependent stresses and strains around a contact region in a viscoelastic strip plate under nonproportional loading condition. The variations of the principal stresses and strains are easily obtained over a wide time range by use of the optical constitutive equations of photoviscoelasticity and the characteristic material property functions.     

Simultaneous detection of ammonia and humidity using transmission surface plasmon resonance technique

Abstract

Gas sensing by using the transmission surface plasmon resonance (T-SPR) technique was demonstrated. Polyacrylic acid (PAA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor A) responded to ammonia; however, it exhibited a strong humidity dependence. Polyvinyl alcohol (PVA)/5-nm-thick gold/40-nm-thick silver/polycarbonate grating substrate structure (Sensor B) as the sensing material was also prepared and it mainly responded to humidity. The T-SPR properties of Sensors A and B were observed simultaneously by a stacking arrangement that enabled us to obtain the responses by using a single spectrophotometer. The ammonia concentration under various humidity conditions could be accurately obtained by simultaneous measurement of Sensors A and B.     

Dibenzylmagnesium-Initiated Anionic Oligomerizations of trans-Stilbene, 1,1-Diphenylethylene,and α-Methylstyrene in Hexamethylphosphortriamide

trans-Stilbene, 1, 1-diphenylethylene, and α-methylstyrene were allowed to react with dibenzylmagnesium to form their oligomers in hexamethylphosphortriamide (HMPA). One and two molecules of stilbene and 1, 1-diphenylethylene were incorporated into the magnesium carbon bond, and the carbanions obtained in HMPA were stable in analogy with the anionic living polymer having alkali cation as the gegenion in eithers. Intense coloration was observed during the reaction between α-methylstyrene and dibenzylmagnesium as well as in the case of stilbene and 1, 1-diphenylethylene. The low molecular weight products which were formed after a long time in the reaction between α-methylstyrene and dibenzylmagnesium were found to have no magnesium-carbon bond. It was considered that the cleavage of the propagating chain occurred gradually after the rapid propagation had proceeded to consume the monomer.     

Corrigendum to “Constraints on operator ordering from third quantization” [Ann. Phys. 365 (2016) 54–65]

In our previous paper Ohkuwa et al. (2016) corrigendum was found in Eqs. (3.4) and (3.6). However, conclusions of our previous paper are not changed.     

Numerical simulation of cyclic voltammetry for reversible systems with complex stoichiometry

Reversible waves of voltammetry with complex non-unity stoichiometry are studied here based on theory. Numerical simulations were performed for various stoichiometric systems in which coefficients m and q were independently varied from 1 to 4 in a general reaction scheme, mO + ne⁻ ai qR. The calculation results indicate that the peak current function at complex stoichiometry differs from that at simple unity stoichiometry. The relation between the half-wave potential and the formal potential has been partially corrected from that previously reported in the literature. Parameters in the relation between the peak potential and the half-wave potential are unique for each stoichiometric system. The parameter in the relation between the peak potential and the half-peak potential is also presented here.