Investigation of Electron Behavior in Nano‐TiO2 Photocatalysis by Using In Situ Open‐Circuit Voltage and Photoconductivity Measurements

The in situ open‐circuit voltages (V_oc) and the in situ photoconductivities have been measured to study electron behavior in photocatalysis and its effect on the photocatalytic oxidation of methanol. It was observed that electron injection to the conduction band (CB) of TiO₂ under light illumination during photocatalysis includes two sources: from the valence band (VB) of TiO₂ and from the methanol molecule. The electron injection from methanol to TiO₂ is slower than that directly from the VB, which indicates that the adsorption mode of methanol on the TiO₂ surface can change between dark and illuminated states. The electron injection from methanol to the CB of TiO₂ leads to the upshift of the Fermi level of electrons in TiO₂, which is the thermodynamic driving force of photocatalytic oxidation. It was also found that the charge state of nano‐TiO₂ is continuously changing during photocatalysis as electrons are injected from methanol to TiO₂. Combined with the apparent Langmuir–Hinshelwood kinetic model, the relation between photocatalytic kinetics and electrons in the TiO₂ CB was developed and verified experimentally. The photocatalytic rate constant is the variation of the Fermi level with time, based on which a new method was developed to calculate the photocatalytic kinetic rate constant by monitoring the change of V_oc with time during photocatalysis.     

Synthesis of visible light-driven Eu, N co-doped TiO2 and the mechanism of the degradation of salicylic acid

Europium and nitrogen co-doped TiO₂ was successfully synthesized by the precipitation–peptization method. The structure and properties of the catalysts were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, and UV–vis diffuse reflectance spectra. The photocatalytic efficiency was evaluated by monitoring the photocatalytic degradation of salicylic acid under visible light irradiation. It was verified that TiO₂ co-doped with nitrogen and 1% europium showed the highest photocatalytic activity. The adsorption isotherms were obtained by measuring the salicylic acid concentration before and after the dark adsorption at different original solution concentrations. The results illustrated that the doping of Eu was beneficial to the adsorption of salicylic acid. The probable degradation mechanism of salicylic acid was examined by the addition of NaF, Na₂S₂O₃, and K₂S₂O₈ as the probe molecules. It was verified that salicylic acid was first adsorbed on the surface of the catalysts, followed by the degradation by the photogenerated holes (h _vb ⁺ ).     

Doping of TiO2–GO and TiO2–rGO with Noble Metals: Synthesis,Characterization and Photocatalytic Performance for Azo Dye Discoloration

The nanocomposites of titania coupled with graphene oxide (GO) and reduced graphene oxide (rGO), respectively, were prepared by homogeneous hydrolysis with urea. Graphene was obtained by effect of high‐intensity cavitation field on natural graphite in the presence of strong aprotic solvents in pressurized ultrasonic reactor. The morphology of TiO₂–GO and TiO₂–rGO composites was assessed by scanning electron microscopy and atomic force microscopy. The nitrogen adsorption–desorption was used for determination of surface area (BET) and porosity. Raman and IR spectroscopy were used for qualitative analysis and diffuse reflectance spectroscopy was employed to estimate band‐gap energies. Further enhancement of the photocatalytic activity was attained by codoping of composites with noble metals—Au, Pd and Pt. The photocatalytic activity of TiO₂–GO and TiO₂–rGO were assessed by photocatalytic decomposition of Orange II dye in an aqueous slurry under UV and visible light irradiation. The photocatalytic activity of noble metals codoped samples was determined with decomposition of Reactive Black 5 azo dye.     

Remediation of Wastewater with Ultraviolet Irradiation Using a Novel Titanium (IV) Oxide Photocatalyst

Photocatalysis has become common and nanomaterials having photocatalytic functions have been widely characterized. At present, among the many candidates for photocatalysis, TiO₂ is almost the only material suitable for industrial use. In this paper, we present a TiO₂ synthesis starting from Ti sheets put in contact with a mixture of 0.1 N NaOH and acetone for 72?hours under ambient conditions. The obtained sheets were washed with distilled water and ethanol, and the surface was analyzed for its structural and morphological properties. Thus, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD) investigations indicated the formation of TiO₂ on the edges of nanometer circles on the surface of the Ti sheets. For characterizing the photocatalytic capacity for wastewater treatment, Ti sheets with TiO₂ on the surface contacted with methylene blue solutions at room temperature under ultraviolet light. The degradation of the methylene blue concentration was measured by ultraviolet–visible spectroscopy, demonstrating 99.94% efficiency for wastewater treatment using the obtained material.     

水对甲醇在Rutile-TiO2(110)-(1 ×1)表面光催化解离的影响简

采用程序升温脱附方法研究了甲醇分子吸附在真空退火后的二氧化钛（110）表面的光催化过程,对比分析了单独吸附甲醇分子以及甲醇分子与水分子共吸附情况下的光催化解离过程. 结果表明,在二氧化钛（110）表面吸附的甲醇分子对共吸附水分子的光催化解离过程并没有直接的帮助作用. 共吸附状态下的水分子也同样没有影响到甲醇的光致解离过程,但是水分子的存在抑制了甲醇光解产物甲醛的光致脱附过程,同时促进了甲酸甲酯的形成.     

On the Simple Complexity of Carbon Monoxide on Oxide Surfaces: Facet‐Specific Donation and Backdonation Effects Revealed on TiO2 Anatase Nanoparticles

Atomic‐scale relationships between the structure of TiO₂ surfaces and the physicochemical properties of surface sites, functional for titania‐based applications, can be obtained from IR spectroscopy by using carbon monoxide (CO) as a molecular probe. In the literature, it is reported that strongly unsaturated cationic Ti sites (Lewis acid), which are important for reactivity, should cause a large upshift of the CO stretching frequency. By using IR spectroscopy of CO on TiO₂ nanomaterials and theoretical analyses, here this model is challenged. It is shown that the stretching frequency of adsorbed CO results from a facet‐dependent and synergic CO–surface donation (upshift) ‐ surface–CO backdonation (downshift) mechanism. These results imply that the interaction of adsorbed molecules with the Ti centers is tuned by the surface oxygen atoms of the first coordination sphere, which play an active role as indirect electron density donors (Lewis base).     

Photocatalytic air-cleaning using TiO2 nanoparticles in porous silica substrate

For air-cleaning, TiO₂ photocatalysis represents one of the very efficient advanced oxidation processes (AOPs) that can decompose chemically and microbiologically stable volatile organic compounds (VOCs). However, the photocatalytic activity of nanocrystalline TiO₂ powders can be significantly suppressed due to TiO₂’s poor adsorption characteristics for organic compounds and its relatively low surface area. The present study sought to solve this problem by immobilising nanocrystalline TiO₂ in the porous silicate substrate. Two titania sources were used in an aqueous solution form: a suspension from a TiO₂ producer in Slovenia, Cinkarna Celje (CC-40) and a TiO₂ sol, prepared by a low-temperature synthesis developed at the University of Nova Gorica (TiO₂-UNG). Two different types of mesoporous silica were used: SBA-15 with an ordered hexagonal pore arrangement and KIL-2 with disordered inter-particle mesoporosity. The structural characteristics, adsorption properties and photocatalytic activity of catalysts deposited on aluminium plates as thin films were investigated. CC-40 exhibited higher adsorption and photocatalytic activity than TiO₂-UNG due to the greater quantity of Ti-OH groups on its surface. The addition of mesoporous silica led to higher adsorption and catalytic activity for both TiO₂ sources. SBA-15 was more efficient than KIL-2.     

Enhanced and suppressed effects of ionic liquid on the photocatalytic activity of TiO2

The effects of a room temperature ionic liquid, 1-butyl-3-methylimidazolium terafluoroborate ([Bmim]BF₄), on the photocatalytic performance of Degussa P25 TiO₂ were investigated. Also, the photocatalysis mechanism was systematically analyzed by conducting different reactive radical trapping experiments. The results showed that photogenerated electrons were the main reactive species involved in the photocatalytic degradation of methyl orange (MO), while ?OH radicals and photogenerated holes played an important role in the photocatalytic decomposition of rhodamine B (RhB). The addition of ionic liquid (IL) could slightly enhance the photocatalytic degradation rate of MO because adsorption of [Bmim]⁺ ions on the TiO₂ surface not only enhanced traping and transfer of photogenerated electrons, but also facilitated adsorption of negatively charged MO. On the contrary, IL suppressed the degradation rate of RhB because [Bmim]⁺ on the TiO₂ surface not only hindered the access of positively charged RhB to TiO₂, but also restricted the diffusion of positively charged holes to the TiO₂/solution interface.     

Photocatalytic degradation of 4-chlorophenol: A mechanistically-based model

The photocatalytic degradation of 4-CP was mathematically modelled using the mechanistic insights and data presented in an earlier study [1]. The solution and surface concentrations of reacting species were calculated by solving a system of differential equations that account for oxidation reactions of dissolved and adsorbed species, adsorption and desorption, reduction of oxygen, and hole-electron recombination. The differential equations were integrated over discrete time-periods and annular regions of the photoreactor. The resulting model predicts the trends observed in studies in other laboratories using different experimental apparati. Using the model it is possible to predict effects of reactor geometry, TiO₂ loading, light intensity, and mixing on the course of TiO₂ photocatalytic oxidation. The model verifies the importance of surface reactions, and reveals the need to better understand the fate and role of oxygen in TiO₂ photocatalytic systems.     

Effect of TiO2 modification with fluorine on the physicochemical properties and activity in the photocatalytic oxidation of pollutants in air under UV irradiation

The influence of the modification of the TiO₂ surface with F^? ions on the physicochemical properties of the catalysts and efficiency in the photooxidation of gaseous molecules under atmospheric conditions and under UV irradiation was studied by IR spectroscopy. The fluorine-containing samples adsorb more water molecules than unmodified TiO₂. The amount of adsorbed water increases with increasing content of surface fluoride ions. The fluorination of the TiO₂ surface first leads to the substitution of the terminal OH groups by F^? ions and to an increase in acidity of the bridging acidic OH groups remained on the surface. The modification also results in the structural rearrangement of the surface involving defective and surface Ti⁴⁺ sites. Fluorine modification increases the activity of TiO₂ in the photocatalytic oxidation of ethanol, acetaldehyde, acetic acid, and acetone. At the same time, benzene and H₂S are oxidized more rapidly on unmodified TiO₂. The presence of fluorine on the TiO₂ surface exerts almost no effect on the oxidation rate of chlorine-containing substrates C₃H₇Cl and C₂H₄Cl₂.

     

Photocatalytic characteristics of TiO2 supported on SiO2

The photocatalytic decomposition of acetaldehyde was carried out on TiO₂/SiO₂. The presence of a support (SiO₂) in TiO₂/SiO₂ helped to promote the efficiency of the photocatalyst. The silica support enhanced the effective surface area of TiO₂ and adsorption of acetaldehyde on TiO₂/SiO₂. TiO₂/SiO₂ synthesized from Ti(SO₄)₂ showed promoting effect on acetaldehyde decomposition. The XPS results revealed that TiO₂/SiO₂ prepared with Ti(SO₄)₂ generated SO ₄ ^2? sites on the TiO₂ surface. The increased acidity could promote the adsorption of acetaldehyde and photocatalytic degradation of acetaldehyde. The sulfate ion seemed to generate the bifunctional sites (acid sites and photoactive sites) and promoted the acetaldehyde decomposition on TiO₂/SiO₂.     

Plasmon-resonance-enhanced visible-light photocatalytic activity of Ag quantum dots/TiO2 microspheres for methyl orange degradation

We successfully prepared Ag quantum dots modified TiO₂ microspheres by facile solvothermal and calcination method. The as-prepared Ag quantum dots/TiO₂ microspheres were characterized by scanning electron microscope, transmission electron microscope, X-ray diffraction, X-ray photoelectron spectroscopy and UV-vis diffuse reflectance spectroscopy. The Ag quantum dots/TiO₂ photocatalyst showed excellent visible light absorption and efficient photocatalytic activity for methyl orange degradation. And the sample with the molar ratio of 0.05 (Ag to Ti) showed the best visible light photocatalytic activity for methyl orange degradation, mainly because of the surface plasmon resonance (SPR) effects of Ag quantum dots to generate electron and hole pairs for enhanced visible light photocatalysis. Finally, possible visible light photocatalytic mechanism of Ag quantum dots/TiO₂ microspheres for methyl orange degradation was proposed in detail.     

TiO2 photocatalysis: Design and applications

TiO₂ photocatalysis is widely used in a variety of applications and products in the environmental and energy fields, including self-cleaning surfaces, air and water purification systems, sterilization, hydrogen evolution, and photoelectrochemical conversion. The development of new materials, however, is strongly required to provide enhanced performances with respect to the photocatalytic properties and to find new uses for TiO₂ photocatalysis. In this review, recent developments in the area of TiO₂ photocatalysis research, in terms of new materials from a structural design perspective, have been summarized. The dimensionality associated with the structure of a TiO₂ material can affect its properties and functions, including its photocatalytic performance, and also more specifically its surface area, adsorption, reflectance, adhesion, and carrier transportation properties. We provide a brief introduction to the current situation in TiO₂ photocatalysis, and describe structurally controlled TiO₂ photocatalysts which can be classified into zero-, one-, two-, and three-dimensional structures. Furthermore, novel applications of TiO₂ surfaces for the fabrication of wettability patterns and for printing are discussed.     

Activation of Water in Titanium Dioxide Photocatalysis by Formation of Surface Hydrogen Bonds: An In Situ IR Spectroscopy Study

The hole‐driving oxidation of titanium‐coordinated water molecules on the surface of TiO₂ is both thermodynamically and kinetically unfavorable. By avoiding the direct coordinative adsorption of water molecules to the surface Ti sites, the water can be activated to realize its oxidation. When TiO₂ surface is covered by the H‐bonding acceptor F, the first‐layer water adsorption mode is switched from Ti coordination to a dual H‐bonding adsorption on adjacent surface F sites. Detailed in situ IR spectroscopy and isotope‐labeling studies reveal that the adsorbed water molecules by dual H‐bonding can be oxidized to O₂ even in the absence of any electron scavengers. Combined with theoretical calculations, it is proposed that the formation of the dual H‐bonding structure can not only enable the hole transfer to the water molecules thermodynamically, but also facilitate kinetically the cleavage of O? H bonds by proton‐coupled electron transfer process during water oxidation.     

Photocatalytic degradation of dichloroacetyl chloride adsorbed on TiO<Subscript>2</Subscript>

Dichloroacetyl chloride (DCAC) attracted our attention as an intermediate product of the photocatalytic degradation of trichloroethylene (TCE). The adsorption and photocatalytic reaction of DCAC on TiO₂ have been investigated by FTIR spectroscopy. The influence of the surface structure of several TiO₂s on the reaction mechanism was discussed in order to understand the complete degradation mechanism of TCE as well as DCAC. DCAC was transformed into dichloroacetic acid (DCAA) on the relatively hydrophobic TiO₂ surface by the small amount of the water molecules weakly adsorbed on the surface. This DCAA was degraded to phosgene, CO₂, and CO during UV irradiation. For the hydrophilic TiO₂, DCAC was mainly transformed into the dichloroacetate anion. UV irradiation allowed this species to produce chloroform in addition to phosgene, CO₂, and CO. It is suggested that DCAC easily reacts with the Ti–OH group on the hydrophilic TiO₂ and forms the bidentate titanium chelate of dichloroacetate, which efficiently degrades into chloroform.     

Adsorption factor and photocatalytic degradation of dye-constituent aromatics on the surface of TiO2 in the presence of phosphate anions

The photocatalytic degradation for some kinds of dye-constituent aromatics with TiO₂ in the presence of phosphate anions in aqueous dispersion was investigated under both visible light (λ>480 nm) and UV irradiation. The influences of phosphate anion upon the degradation of organics under these different conditions was revealed by the measurement of point of zero ξ-potential (P _ZC) of TiO₂, UV-VIS spectra, HPLC and LC-MS. The adsorption and photodegradation of some organics, which adsorb on the surface of TiO₂ by a dominating group bearing a positive charge, was enhanced, while that of others, which adsorb on the surface of TiO₂ by a dominating group bearing negative charge, was depressed by the presence of phosphate anions under UV irradiation at the experimental conditions (pH 4.3). It was confirmed that better adsorption of organics on the surface of TiO₂ had an advantage in their photocatalytic degradation under UV irradiation. On the other hand, although the adsorption of rhodamine B (RhB) and methylene Blue (MB) markedly increased, their degradation under visible light irradiation was depressed in the presence of phosphate anions. It is suggested that phosphate anion greatly blocked the electron transfer from excited RhB and MB molecules as RhB and MB molecules predominantly adsorbed on the surface of TiO₂ through the electrostatic interaction with surface adsorbed phosphate anions.     

Unique adsorption behaviors of NO and O2 at hydrogenated anatase TiO2(101)

The extra electron on the hydrogenated anatase TiO₂(101) is localized at the nearest Ti_5c only, and the chargetransfer promoted NO and O₂ adsorptions are also site-selective. These results are totally different from those at hydrogenated rutile TiO₂(110).     

Fullerol–Titania Charge‐Transfer‐Mediated Photocatalysis Working under Visible Light

The development of visible‐light‐active photocatalysts is being investigated through various approaches. In this study, C₆₀‐based sensitized photocatalysis that works through the charge transfer (CT) mechanism is proposed and tested as a new approach. By employing the water‐soluble fullerol (C₆₀(OH)_x) instead of C₆₀, we demonstrate that the adsorbed fullerol activates TiO₂ under visible‐light irradiation through the “surface–complex CT” mechanism, which is largely absent in the C₆₀/TiO₂ system. Although fullerene and its derivatives have often been utilized in TiO₂‐based photochemical conversion systems as an electron transfer relay, their successful photocatalytic application as a visible‐light sensitizer of TiO₂ is not well established. Fullerol/TiO₂ exhibits marked visible photocatalytic activity not only for the redox conversion of 4‐chlorophenol, I^?, and Cr^VI, but also for H₂ production. The photoelectrode of fullerol/TiO₂ also generates an enhanced anodic photocurrent under visible light as compared with the electrodes of bare TiO₂ and C₆₀/TiO₂, which confirms that the visible‐light‐induced electron transfer from fullerol to TiO₂ is particularly enhanced. The surface complexation of fullerol/TiO₂ induced a visible absorption band around 400–500 nm, which was extinguished when the adsorption of fullerol was inhibited by fluorination of the surface of TiO₂. The transient absorption spectroscopic measurement gave an absorption spectrum ascribed to fullerol radical cations (fullerol^.+) the generation of which should be accompanied by the proposed CT. The theoretical calculation regarding the absorption spectra for the (TiO₂ cluster+fullerol) model also confirmed the proposed CT, which involves excitation from HOMO (fullerol) to LUMO (TiO₂ cluster) as the origin of the visible‐light absorption.     

Low-temperature deposition and crystallization of RuO2/TiO2 on cotton fabric for efficient solar photocatalytic degradation of o-toluidine

A green low-temperature deposition and crystallization method was developed to uniformly coat RuO₂/TiO₂ nanocomposite onto cotton fabrics for efficient solar photocatalysis. The sequential growth of anatase TiO₂ and rutile RuO₂ on the surface of the cotton was confirmed by XRD, Raman and XPS characterizations. After the deposition of RuO₂, the optical properties of RuO₂/TiO₂/Cotton revealed better visible light absorption and higher charge mobility, and XPS spectra showed that the peaks of Ti 2p_3/2 and O 1 s shifted towards the lower binding energies due to the interfacial charge transfer at the robust RuO₂/TiO₂ mediated with Ti–O–Ru bonding. The photocatalytic performances of the RuO₂/TiO₂/Cotton were evaluated towards the photodegradation of o-toluidine (o-TD), an aromatic amine widely used in the chemical industry. Compared with TiO₂/Cotton, RuO₂/TiO₂/Cotton exhibited a remarkable improvement in the photocatalytic activity. The presence of RuO₂ on the surface of TiO₂/Cotton narrowed the band gap and improved the absorption of visible light. Moreover, the successful formation of a robust heterogeneous interface between TiO₂ and RuO₂ suppressed the charge carrier (e^–/h⁺) recombination effectively. With the RuO₂/TiO₂ coating chemically bound to the cotton fibers, RuO₂/TiO₂/Cotton delivered long-term stability in photocatalytic activity and high mechanical durability even after 20 washing times. Our facile and scalable synthesis strategy paved a universal route to efficient immobilization of visible-light-responsible TiO₂-based photocatalysts on the low-heat-resistant substrates for various applications.

Graphical abstract

     

Photoelectron Spectroscopic Study of Methanol Adsorbed Rutile TiO2(110) Surface

Methanol/TiO₂(110) is a model system in the surface science study of photocatalysis where methanol is taken as a hole capture. However, the highest occupied molecular orbital of adsorbed methanol lies below the valence band maximum of TiO₂, preventing the hole transfer. To study the level alignment of this system, electronic structure of methanol covered TiO₂(110) surface has been measured by ultraviolet photoelectron spectroscopy and the molecular orbitals of adsorbed methanol have been clearly identified. The results indicate the weak interaction between methanol and TiO₂ substrate. The static electronic structure also suggests the mismatch of the energy levels. These static experiments have been performed without band gap excitation which is the prerequisite of a photocatalytic process. Future study of the transient electronic structure using time-resolved UPS has also been discussed.