Covalent Grafting of BPin functions on Carbon Nanotubes and Chan–Lam–Evans Post-Functionalization

The chemical functionalization of carbon nanotubes is often a prerequisite prior to their use in various applications. The covalent grafting of 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (BPin) functional groups directly on the surface of multi- and single-walled carbon nanotubes, activated by nucleophilic addition of nBuLi, was carried out. Thermogravimetric analysis (TGA) coupled with mass spectrometry, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ions mass spectrometry (ToF-SIMS) confirmed the efficiency of this methodology and proved the integrity and covalent grafting of the BPin functional groups. These groups were further reacted with various nucleophiles in the presence of a copper(II) source in the conditions of the aerobic Chan–Lam–Evans coupling. The resulting materials were characterized by TGA, XPS and ToF-SIMS. This route is efficient, reliable and among the scarce reactions that enable the direct grafting of heteroatoms at carbonaceous material surfaces.     

Numerical study of two-airfoil arrangements by a discrete vortex method

Theoretical and Computational Fluid Dynamics - The aerodynamic characteristics of two neighboring airfoils are greatly different from those of a single airfoil, for both attached and detached flow...     

Amphiphilic pentablock copolymers and their blends with PDMS for antibiofouling coatings

Well‐defined amphiphilic pentablock copolymers Siy‐(EGx‐FAz)₂ composed of polysiloxane (Si), polyethylene glycol (EG), and perfluorohexylethyl polyacrylate (FA) blocks are synthesized by ATRP of FA monomer starting from a difunctional bromo‐terminated macroinitiator. Diblock copolymers EGx‐FAz are also synthesized as model systems. The block copolymers are used, either alone or blended with a PDMS matrix in varied loadings, to prepare antibiofouling coatings. Angle‐resolved XPS and contact angle measurements show that the coating surface is highly enriched in fluorine content but undergoes reconstruction after contact with water. Protein adsorption experiments with human serum albumin and calf serum highlight that diblock copolymers resist protein adhesion better than do pentablock copolymers. Blending of the pentablock copolymer with PDMS results in increased protein adsorption. By contrast, the PDMS‐matrix coatings show high removal percentages of sporelings of the green fouling alga Ulva linza. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1213–1225     

Poly(trimethylene carbonate)/Poly(malic acid) Amphiphilic Diblock Copolymers as Biocompatible Nanoparticles

Amphiphilic polycarbonate–poly(hydroxyalkanoate) diblock copolymers, namely, poly(trimethylene carbonate) (PTMC)‐b‐poly(β‐malic acid) (PMLA), are reported for the first time. The synthetic strategy relies on commercially available catalysts and initiator. The controlled ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) catalyzed by the organic guanidine base 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD), associated with iPrOH as an initiator, provided iPrO?PTMC?OH, which served as a macroinitiator in the controlled ROP of benzyl β‐malolactonate (MLABe) catalyzed by the neodymium triflate salt (Nd(OTf)₃). The resulting hydrophobic iPrO?PTMC‐b‐PMLABe?OH copolymers were then hydrogenolyzed into the parent iPrO?PTMC‐b‐PMLA?OH copolymers. A range of well‐defined copolymers, featuring different sizes of segments (M_n,NMR up to 9300 g mol^?1; Ð_M=1.28–1.40), were thus isolated in gram quantities, as evidenced by NMR spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and contact angle analyses. Subsequently, PTMC‐b‐PMLA copolymers with different hydrophilic weight fractions (11–75 %) self‐assembled in phosphate‐buffered saline upon nanoprecipitation into well‐defined nano‐objects with D_h=61–176 nm, a polydispersity index <0.25, and a negative surface charge, as characterized by dynamic light scattering and zeta‐potential analyses. In addition, these nanoparticles demonstrated no significant effect on cell viability at low concentrations, and a very low cytotoxicity at high concentrations only for PTMC‐b‐PMLA copolymers exhibiting hydrophilic fractions over 47 %, thus illustrating the potential of these copolymers as promising nanoparticles.     

Ultrasmall Superparamagnetic Iron Oxide Nanoparticles with Europium(III) DO3A as a Bimodal Imaging Probe

A new prototype consisting of ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles decorated with europium(III) ions encapsulated in a DO3A organic scaffold was designed as a platform for further development of bimodal contrast agents for MRI and optical imaging. The USPIO nanoparticles act as negative MRI contrast agents, whereas the europium(III) ion is a luminophore that is suitable for use in optical imaging detection. The functionalized USPIO nanoparticles were characterized by TEM, DLS, XRD, FTIR, and TXRF analysis, and a full investigation of the relaxometric and optical properties was conducted. The typical luminescence emission of europium(III) was observed and the main red emission wavelength was found at 614 nm. The relaxometric study of these ultrasmall nanoparticles showed r₂ values of 114.8 mm ^?1_Fes^?1 at 60 MHz, which is nearly double the r₂ relaxivity of Sinerem^®.     

A Far-Red Emitting Fluorescent Chemogenetic Reporter for In Vivo Molecular Imaging

Far-red emitting fluorescent labels are highly desirable for spectral multiplexing and deep tissue imaging. Here, we describe the generation of frFAST (far-red Fluorescence Activating and absorption Shifting Tag), a 14-kDa monomeric protein that forms a bright far-red fluorescent assembly with (4-hydroxy-3-methoxy-phenyl)allylidene rhodanine (HPAR-3OM). As HPAR-3OM is essentially non-fluorescent in solution and in cells, frFAST can be imaged with high contrast in presence of free HPAR-3OM, which allowed the rapid and efficient imaging of frFAST fusions in live cells, zebrafish embryo/larvae, and chicken embryos. Beyond enabling the genetic encoding of far-red fluorescence, frFAST allowed the design of a far-red chemogenetic reporter of protein–protein interactions, demonstrating its great potential for the design of innovative far-red emitting biosensors.     

Multiple Site Hydrogen Isotope Labelling of Pharmaceuticals

Radiolabelling is fundamental in drug discovery and development as it is mandatory for preclinical ADME studies and late-stage human clinical trials. Herein, a general, effective, and easy to implement method for the multiple site incorporation of deuterium and tritium atoms using the commercially available and air-stable iridium precatalyst [Ir(COD)(OMe)]₂ is described. A large scope of pharmaceutically relevant substructures can be labelled using this method including pyridine, pyrazine, indole, carbazole, aniline, oxa-/thia-zoles, thiophene, but also electron-rich phenyl groups. The high functional group tolerance of the reaction is highlighted by the labelling of a wide range of complex pharmaceuticals, containing notably halogen or sulfur atoms and nitrile groups. The multiple site hydrogen isotope incorporation has been explained by the in situ formation of complementary catalytically active species: monometallic iridium complexes and iridium nanoparticles.     

NHC-Adducts of Cyclopentadienyl-Substituted Alanes

The mono- and bis-iodo-substituted NHC-stabilized alanes (NHC) ⋅ AlH₂I and (NHC) ⋅ AlHI₂ offer a convenient entry for further substitution reactions at aluminum. Reactions of (NHC) ⋅ AlH₂I 1 – 4 with one equivalent of NaCp afforded the adducts (NHC) ⋅ AlH₂Cp 9 – 12 (NHC=Me₂Im^Me ( 9 ), iPr₂Im^Me ( 10 ), iPr₂Im ( 11 ), Dipp₂Im ( 12 )). Alane adducts with two Cp substituents (NHC) ⋅ AlHCp₂ 13 – 16 (NHC=Me₂Im^Me ( 13 ), iPr₂Im^Me ( 14 ), iPr₂Im ( 15 ), Dipp₂Im ( 16 )) were prepared by the analogous reaction of (NHC) ⋅ AlHI₂ 5 – 8 using two equivalents of NaCp. The unusual dimeric adducts ((NHC) ⋅ AlH₂Cp ⋅ CpMgI)₂ 17 – 19 (NHC=Me₂Im^Me ( 17 ), iPr₂Im^Me ( 18 ), iPr₂Im ( 19 )) were obtained from the reaction of 1 – 3 with MgCp₂.