Development of a Chitosan/Nickel Phthalocyanine Composite Based Conductometric Micro-sensor for Methanol Detection

Thin-film composite of chitosan/nickel phthalocyanine (NiPc) was electrochemically deposited on the fingers of interdigitated gold electrodes, applying chronoamperometric polymerization technique. The presence of crystallized NiPc in the chitosan was confirmed by EDX and FTIR analysis. Acetone, ethanol, and methanol gas-sensing properties of the films prepared at optimum conditions were studied at atmospheric temperature, through differential measurements at an optimized frequency of 10 kHz, using a lock-in amplifier. The conductometric sensor presents the highest sensitivity of 60.2 μS.cm⁻¹(v/v) for methanol and 700 ppm as the limit of detection. For validation, the methanol content of a commercial rubbing alcohol was determined.     

Rate and Computational Studies for Pd-NHC-Catalyzed Amination with Primary Alkylamines and Secondary Anilines: Rationalizing Selectivity for Monoarylation versus Diarylation with NHC Ligands

The relative rates of arylation of primary alkylamines with different Pd-NHC catalysts have been measured, as have the relative rates of arylation of the secondary aniline product in an attempt to understand the key ligand design features necessary to have high selectivity for the monoarylated amine product. As the substituents on the N-aryl ring of the NHC increase in size, selectivity for monoarylation increases and this is further enhanced by chlorinating the back of the NHC ring. Computations have been performed on the catalytic cycle of this transformation in order to understand the selectivity obtained with the different catalysts.     

New fused pyrroles with rA1/A2A antagonistic activity as potential therapeutics for neurodegenerative disorders

Molecular Diversity - In a pilot study, eleven pyrrolopyridine and pyrrolopyrimidine derivatives (specifically, 7-azaindole and 7-deazapurine derivatives) were synthesised by Suzuki cross-coupling...     

Relationship of nanostructure and thermo-chemical response/thermal ablation of carbon aerogels

In this work, the interfacial mass balance relations combined with the non-parametric kinetic (NPK) analysis results were used for evaluating the thermo-chemical ablation process and oxidation mechanism of carbon aerogels with various porous structure. It was found that the two-parameter model of Nomen–Sempereis was able to describe the kinetics of the oxidation reaction and to reveal the structure-dependent contribution of two main processes with chemical and physical nature. The porosity of the carbon aerogel, rather than the other microstructural features, was realized more effective on the rate of ablation.     

Nanocomposite Coatings Based on Modified Graphene Oxide and Polydimethylsiloxane: Characterization and Thermal Properties

Russian Journal of Applied Chemistry - Graphene oxide as a derivative of graphite has been noticed as a high efficient material and its application in nanocomposite coatings is surprisingly...     

Synthesis and anticancer activity of some new heterocyclic compounds based on 1-cyanoacetyl-3,5-dimethylpyrazole

Research on Chemical Intermediates - The starting 3-(3,5-dimethyl-1H-pyrazol-1-yl)-3-oxopropanenitrile (1) reacts with phenyl isothiocyanate and ethyl bromoacetate to give the corresponding...     

Densitometric Kinetic Stability Studies of Some Plant Extracts Using Different Regression Methods

JPC – Journal of Planar Chromatography – Modern TLC -     

Mass cultivation of various algal species and their evaluation as a potential candidate for lipid production

Microalgae have been proposed as a promising source for biodiesel production. Focusing on algal strains for biodiesel production, efforts should be made to search new strains. Experiments were carried out to investigate the effects of growth parameters (nutrients, pH, light, aeration and temperature) and the oil percentage of eight algal strains (Chlorella sp., Cladophora sp., Hydrodictylium sp., Oedogonium sp., Oscillatoria sp., Spirogyra sp., Stigeocolonium sp., Ulothrix sp.). Results show that 6.5–7.5 is the optimum pH for the growth of all algal species. Temperature showed a greater variation (25°40°C). Ulothrix sp. gave more biomass productivity and is the most suitable strain for biodiesel production due to higher oil percentage (62%). Least biomass production was observed for Stigeocolonium sp. and least oil content was obtained from Hydrodictylium sp. It was observed that among these eight algal strains for biodiesel production, Ulothrix and Chlorella are the most promising algae species.