石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

CdS/Si nanofilm heterojunctions based on amorphous silicon films:Fabrication,structures,and electrical properties

Shortening the distance between the depletion region and the electrodes to reduce the trapped probability of carriers is a useful approach for improving the performance of heterojunction.The CdS/Si nanofilm heterojunctions are fabricated by using the radio frequency magnetron sputtering method to deposit the amorphous silicon nanofilms and Cd S nanofilms on the ITO glass in turn.The relation of current density to applied voltage(I-V)shows the obvious rectification effect.From the analysis of the double logarithm I-V curve it follows that below~2.73 V the electron behaviors obey the Ohmic mechanism and above~2.73 V the electron behaviors conform to the space charge limited current(SCLC)mechanism.In the SCLC region part of the traps between the Fermi level and conduction band are occupied,and with the increase of voltage most of the traps are occupied.It is believed that Cd S/Si nanofilm heterojunction is a potential candidate in the field of nano electronic and optoelectronic devices by optimizing its fabricating procedure.     

配合参数对单晶炉驱动系统的影响分析

光伏产业的发展使得对硅材料的需求日益增加,同时硅单晶生产行业竞争也日趋激烈。作为生产硅单晶的重要装备,单晶炉的稳定性和可靠性关系到硅单晶生产效率的提升和成本的下降,因此其驱动系统的设计和优化成为装备制造的关键环节。本文以NVT-HG2000-V1型硅单晶生长炉的驱动系统为研究对象,用SolidWorks三维建模实现虚拟装配,采用ADAMS建立其动力学仿真模型,并对驱动系统的运动过程进行仿真模拟。采用控制变量法定量分析了铜套与升降轴的配合间隙及丝杠参数对驱动力和驱动力矩的影响规律,进而在提高硅单晶生长炉装备稳定性和可靠性方面给出合理的技术建议。结果表明,铜套与升降轴的配合间隙达到0.071 mm后能有效降低驱动系统运行所需驱动力矩,丝杠倾斜度、螺纹螺距与螺纹间摩擦系数的增大均会导致驱动系统运行所需力矩大幅增加。     

g-C3N4-W18O49复合光催化剂的制备及其光催化机理研究

通过简单的溶剂热法成功制备出了g-C3N4-W18O49复合光催化剂,采用XRD、SEM、TEM以及PL对所得催化剂的物相结构及形貌和光学性能进行了表征,通过降解甲基橙和光解水产氢实验研究所得催化剂的催化性能及其催化机理.由实验可知,W18O49的含量为50;时所得g-C3N4-W18O49复合光催化剂的降解性能最好,其降解率比纯g-C3N4纳米片提高48;;为进一步研究复合光催化剂的电子-空穴传输机理,我们又进行了光解水制氢实验.结果表明:单一的W18O49无产氢活性,它的复合明显降低了g-C3N4的产氢速率,说明复合结构中光生电子是从g-C3N4传递到了W18O49,表现出明显的Ⅱ型异质结复合特征,而不是部分文献所提出的Z型方式.     

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

Development of Lysosome-Targeted Fluorescent Probes for Cys by Regulating the Boron-dipyrromethene (BODIPY) Molecular Structure

Our previous discovery suggested that substituents on the 1,7 positions delicately modulate the sensing ability of the meso-arylmercapto boron-dipyrromethene (BODIPY) to biothiols. In this work, the impact of delicate modulations on the sensing ability is investigated. Therefore, 1,7-dimethyl, 3,5-diaryl substituted BODIPY is designed and developed and its conformationally restricted species with a meso-arylmercapto moiety ( DM-BDP-SAr and DM-BDP-R-SAr ) as selective fluorescent probes for Cys. Moreover, the lysosome-target probes ( Lyso-S and Lyso-D ) based on DM-BDP-SAr carrying one or two morpholinoethoxy moieties were developed. They were able to detect Cys selectively in vitro with low detection limits. Both Lyso-S and Lyso-D localized nicely in lysosomes in living HeLa cells and exhibited red fluorescence for Cys. Moreover, a novel fluorescence quenching mechanism was proposed from the calculations by density functional theory (DFT). The probes may go through intersystem crossing (from singlet excited state to triplet excited state) to result in fluorescence quenching.     

Precise Synthesis of Poly(thioester)s with Diverse Structures by Copolymerization of Cyclic Thioanhydrides and Episulfides Mediated by Organic Ammonium Salts

The precise synthesis of poly(thioester)s with diverse structures is still a significant challenge in the polymeric materials field. Herein, we report a novel approach to the synthesis of well‐defined poly(thioester)s by the controlled alternating copolymerization of cyclic thioanhydrides and episulfides induced by simple organic ammonium salts. Both the cation and anion have strong effects on the copolymerization. [PPN]OAc ([PPN]=bis(triphenylphosphine)iminium) with a bulky cation was proven to be efficient in initiating this polymerization, yielding poly(thioester)s with a completely alternating structure, controlled molecular weight, and narrow polydispersity. The poly(thioester) obtained from succinic thioanhydride and propylene sulfide is a typical semicrystalline material, possessing a high refractive index of up to 1.78. Because it uses readily available monomers, this method is expected to open up a new route to poly(thioester)s with diverse structures and properties.     

Synthesis of Tri‐ and Difluoromethoxylated Compounds by Visible‐Light Photoredox Catalysis

Trifluoromethoxy (OCF₃) and difluoromethoxy (OCF₂H) groups are fluorinated structural motifs that exhibit unique physicochemical characteristics. Incorporation of these substituents into organic molecules is a highly desirable approach used in medicinal chemistry and drug discovery processes to alter the properties of a parent compound. Recently, tri‐ and difluoromethyl ethers have received increasing attention and several innovative strategies to access these valuable functional groups have been developed. The focus of this Minireview is the use of visible‐light photoredox catalysis in the synthesis of tri‐ and difluoromethyl ethers. Recent photocatalytic strategies for the formation of O?CF₃, C?OCF_3, O?CF₂H, and C?OCF₂H bonds as well as other transformations leading to the construction of OR_F groups are discussed herein.     

Metabolomic analysis of raw Pinelliae Rhizoma and its alum‐processed products via UPLC–MS and their cytotoxicity

Alum‐processing is a traditional method to attenuate the toxicity of Pinelliae Rhizoma (tubers of Pinellia ternate, PT). The present study aimed at investigating the chemical and cytotoxic changes during alum processing. Metabolomic profiles of raw and alum‐processed PT were studied based on ultra‐performance liquid chromatography coupled with Orbitrap mass spectrometry. More than 80 chemicals in positive MS mode and 40 chemicals in negative MS mode, such as organic acids, amino acids, glucosides and nucleosides, were identified after multivariate statistical analysis, including principal component analysis and orthogonal partial least‐square discriminant analysis. Almost all of the identified chemical markers were significantly decreased ~10‐ to 100‐fold after alum processing. Meanwhile, the correlations between the chemical markers were assimilated to a positive coefficient from disorderly distribution during the processing. Raw PT extracts could inhibit the proliferation of human carcinoma cells (HCT‐116, HepG2, and A549) at the rate of 40.5, 24.8 and 31.6% more strongly than processed PT. It was concluded that the alum processing of PT could decrease the number of actively water‐soluble principles at the same time as decreasing toxicity. Given the water‐insoluble property of toxic calcium oxalate raphides in PT, we suggest that a more scientific processing method should be sought.