TiO2/CuInS2-sensitized structure for sensitive photoelectrochemical immunoassay of cortisol in saliva

Journal of Solid State Electrochemistry - Cortisol, a steroid hormone, has been confirmed as a kind of biomarker that reflects the stress response of psychobiology and related adverse health...     

Advantageous Interfacial Effects of AgPd/g-C3N4 for Photocatalytic Hydrogen Evolution: Electronic Structure and H2O Dissociation

Bimetallic AgPd nanoparticles have been synthesized before, but the interfacial electronic effects of AgPd on the photocatalytic performance have been investigated less. In this work, the results of hydrogen evolution suggest that the bimetallic AgPd/g-C₃N₄ sample has superior activity to Ag/g-C₃N₄ and Pd/g-C₃N₄ photocatalysts. The UV/Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, CO adsorption diffuse reflectance FTIR spectroscopy, and FTIR results demonstrate that in the AgPd/g-C₃N₄, the surface electronic structures of Pd and Ag are changed, which is beneficial for faster photogenerated electron transfer and greater H₂O molecule adsorption. In situ ESR spectra suggest that, under visible light irradiation, there is more H₂O dissociation to radical species on the AgPd/g-C₃N₄ photocatalyst. Furthermore, DFT calculations confirm the interfacial electronic effects of AgPd/g-C₃N₄, that is, Pd^δ−⋅⋅⋅Ag^δ+, and the activation energy of H₂O molecule dissociation on AgPd/g-C₃N₄ is the lowest, which is the main contributor to the enhanced photocatalytic H₂ evolution.     

Salen–Mg-doped NH2–MIL-101(Cr) for effective CO2 adsorption under ambient conditions

A novel metal-doped metal–organic framework (MOF) was developed by incorporating salen–Mg into NH₂–MIL-101(Cr) structure under ambient conditions. The Schiff base complex was successfully prepared by condensing salicylaldehyde with a free amino group and then coordinating metal ions. Such a structure can endow the sample with higher CO₂ adsorption performance. At 0°C and 1 bar, the salen–Mg-modified sample achieves the maximum adsorption capacity of 2.18 mmol g⁻¹ for CO₂, which was 5.8% higher than the pristine salen–MOF under the same conditions. Notably, the Freundlich model indicates that the CO₂ adsorption process of all samples conforms to reversible adsorption. However, the correlation coefficients (R²) of the Mg-doped sample are lower than that of the pristine sample. Besides, the CO₂/N₂ adsorption selectivity and isosteric heat also show a similar trend. These results indicate that the salen–Mg can enhance the interaction between the material and CO₂ molecules.     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Pb的过量值对溶胶-水热法合成钙钛矿型PZT反铁电陶瓷粉体的影响

采用溶胶-水热法合成了具有单一钙钛矿结构的PZT反铁电陶瓷粉体.根据课题组前期的实验结果,选取的水热反应温度为180℃,水热反应时间为24 h,矿化剂KOH的浓度为3 mol/L,探讨了Pb的过量值对合成PZT陶瓷粉体的影响.实验发现,Pb的过量值过低,不足以补偿反应过程中Pb的损失量,A位的Pb缺失易导致PZT粉体结晶度的下降,颗粒结晶不完整.随着Pb过量值的增加,颗粒结晶增强,结晶也越完整.当Pb过量增加到10;时,实验获得了结晶良好的PZT粉体.因此,本实验Pb的最佳过量值为10;.     

Cuprous oxide/titanium dioxide composite photocatalytic decolorization of reactive brilliant red X-3B dyes wastewater under visible light

Research on Chemical Intermediates - In recent years, how to improve photocatalytic performance under visible light has become one of the research hot topics. The nano-TiO2 particles were...     

田字形地震超材料甚低频宽带隙机理

在地球中传播的地震波主要有体波和表面波,而表面波中Rayleigh波对建筑物造成的破坏最为强烈。针对Rayleigh波的振动控制,提出一种田字形超材料结构。相比于传统的地震超材料,这种超材料屏障是由外部口字形框体内部嵌套十字形柱体组成,形成4个可填充区域,其外部框体采用部分埋入的方式,具有高强度、强稳定性、填充方式灵活的特点。应用有限元法计算了田字形超材料的能带结构和传输特性,并通过分析带隙边界处模态振型可知,带隙的打开是由于柱体的局域共振。结合带隙机理可知,柱体结构中土壤填充量不同可改变柱体的质量,形成不同的谐振频率,产生甚低频带隙。为进一步拓宽带隙,设计研究了正、负梯度的质量填充方式,均可得到3.3~13.1 Hz甚低频宽带隙,在谐振频率范围内两者的隔震方式分别为Rayleigh波彩虹捕获和Rayleigh波到体波的转化。最后,采用EI-Centro地震波对填充屏障进行了时程验证,加速度最大幅值衰减超过80%,为地震超材料在减震隔震方面应用提供了新的设计思路和方法。     

Synthesis and Optoelectronic Applications of dπ–pπ Conjugated Polymers with a Di-metallaaromatic Acceptor

The development of conjugated polymers especially n-type polymer semiconductors is powered by the design and synthesis of electron-deficient building blocks. Herein, a strong acceptor building block with di-metallaaromatic structure was designed and synthesized by connecting two electron-deficient metallaaromatic units through a π-conjugated bridge. Then, a double-monomer polymerization methodology was developed for inserting it into conjugated polymer scaffolds to yield metallopolymers. The isolated well-defined model oligomers indicated polymer structures. Kinetic studies based on nuclear magnetic resonance and ultraviolet–visible spectroscopies shed light on the polymerization process. Interestingly, the resulted metallopolymers with d_π–p_π conjugations are very promising electron transport layer materials which can boost photovoltaic performance of an organic solar cell, with power conversion efficiency up to 18.28 % based on the PM6 : EH-HD-4F non-fullerene system. This work not only provides a facile route to construct metallaaromatic conjugated polymers with various functional groups, but also discovers their potential applications for the first time.     

A Metal–Organic Compound as Cathode Material with Superhigh Capacity Achieved by Reversible Cationic and Anionic Redox Chemistry for High-Energy Sodium-Ion Batteries

Although sodium-ion batteries (SIBs) are considered as alternatives to lithium-ion batteries (LIBs), the electrochemical performances, in particular the energy density, are much lower than LIBs. A metal–organic compound, cuprous 7,7,8,8-tetracyanoquinodimethane (CuTCNQ), is presented as a new kind of cathode material for SIBs. It consists of both cationic (Cu^II↔Cu^I) and anionic (TCNQ⁰↔TCNQ⁻↔ TCNQ²⁻) reversible redox reactions, delivering a discharge capacity as high as 255 mAh g⁻¹ at a current density of 20 mA g⁻¹. The synergistic effect of both redox-active metal cations and organic anions brings an electrochemical transfer of multiple electrons. The transformation of cupric ions to cuprous ions occurs at near 3.80 V vs. Na⁺/Na, while the full reduction of TCNQ⁰ to TCNQ⁻ happens at 3.00–3.30 V. The remarkably high voltage is attributed to the strong inductive effect of the four cyano groups.     

Simple and rapid surface-enhanced Raman Spectroscopy assay for safranine T and its application in highly sensitive determination of mercury (Ⅱ)

A simple and sensitive surface-enhanced Raman spectroscopy (SERS) method for the detection of safranine T (ST) and Hg²⁺ using silver nanoparticles (AgNPs) as substrate was developed. ST can absorb on the surface of AgNPs through electrostatic interaction, the electromagnetic effect combined with chemical adsorption effect give a notable Raman enhancement for ST. The presence of Hg²⁺ well decreased the absorbed ST molecules on AgNPs, leading to a significant decrease of SERS signals thus enabling to detect Hg²⁺. The determination conditions for SERS, including the amount of AgNPs, the concentration of NaCl, the concentration of HCl, the concentration of ST and the reaction time, were optimised. Under the optimised experimental conditions, good linear responses were obtained for ST and Hg²⁺ in the concentration ranges of 0.01–4.0 μmol L^?1 (3.5–1403.4 ng mL^?1) and 0.01–2.0 μmol L^?1 (2.0–401.2 ng mL^?1), the limit of detection were 3.0 nmol L^?1 (1.1 ng mL^?1) and 2.0 nmol L^?1 (0.4 ng mL^?1), respectively. The present method was subsequently applied to the determination of ST in tomato sauces and Hg²⁺ in environmental waters, the recoveries of ST and Hg²⁺ in spiked samples are 95.5–107.8% and 91.4–110.8 %, respectively.