g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

MoS2/g-C3N4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS₂,将其与石墨相氮化碳（g-C₃N₄）复合,制得MoS₂/g-C₃N₄复合材料。采用X射线衍射（XRD）,扫描电镜（SEM）,X射线光电子能谱（XPS）,傅里叶变换红外光谱（FTIR）,Raman光谱,紫外-可见漫反射吸收光谱（DRS）和光致荧光（PL）技术对复合材料进行表征。可见光下考察MoS₂/g-C₃N₄复合材料光催化降解罗丹明B（RhB）的活性,结果表明：将少量MoS₂与g-C₃N₄复合可明显提高光催化活性,且1%（w/w）MoS₂/g-C₃N₄复合物的光催化活性最高,可能的原因是MoS₂和g-C₃N₄匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

Enhanced photocatalytic H2 production over dual-cocatalyst-modified g-C3N4 heterojunctions

Ag nanoparticles (NPs) were deposited on the surface of g-C₃N₄ (CN) by an in situ calcination method. NiS was successfully loaded onto the composites by a hydrothermal method. The results showed that the 10 wt%-NiS/1.0 wt%-Ag/CN composite exhibits excellent photocatalytic H₂ generation performance under solar-light irradiation. An H₂ production rate of 9.728 mmol·g^?1·h^?1 was achieved, which is 10.82-, 3.45-, and 2.77-times higher than those of pure g-C₃N₄, 10 wt%-NiS/CN, and 1.0 wt%-Ag/CN composites, respectively. This enhanced photocatalytic H₂ generation can be ascribed to the co-decoration of Ag and NiS on the surface of g-C₃N₄, which efficiently improves light harvesting capacity, photogenerated charge carrier separation, and photocatalytic H₂ production kinetics. Thus, this study demonstrates an effective strategy for constructing excellent g-C₃N₄-related composite photocatalysts for H₂ production by using different co-catalysts.     

MoS_2/g-C_3N_4复合材料的制备及可见光催化性能

首先在N-甲基吡咯烷酮溶液中超声剥离得到少层的MoS_2,将其与石墨相氮化碳(g-C_3N_4)复合,制得MoS_2/g-C_3N_4复合材料。采用X射线衍射(XRD),扫描电镜(SEM),X射线光电子能谱(XPS),傅里叶变换红外光谱(FTIR),Raman光谱,紫外-可见漫反射吸收光谱(DRS)和光致荧光(PL)技术对复合材料进行表征。可见光下考察MoS_2/g-C_3N_4复合材料光催化降解罗丹明B(Rh B)的活性,结果表明:将少量MoS_2与g-C_3N_4复合可明显提高光催化活性,且1%(w/w)MoS_2/g-C_3N_4复合物的光催化活性最高,可能的原因是MoS_2和g-C_3N_4匹配的能带结构,增大了界面间电荷的传输,降低了光生电子-空穴的复合,进而提高了光催化活性。     

The facile synthesis of graphitic carbon nitride from amino acid and urea for photocatalytic H<Subscript>2</Subscript> production

We report on the facile synthesis of g-C₃N₄ based polymers by co-condensing urea with glycine for photocatalytic hydrogen evolution. The as-prepared photocatalysts were then characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence emission spectrometry, electron paramagnetic resonance spectrometry and transmission electron microscopy. Compared with pristine g-C₃N₄, obtained from direct pyrolysis of urea, the CNU-G₅ photocatalyst showed largely enhanced photocatalytic H₂ activities about 75 μmol h^?1, which is 5 times higher than of the pristine CNU. The enhanced activities are ascribed to the larger specific area surface, strengthened optical absorption and improved electron transport ability. Our work opens up a new pathway for the synthesis graphitic carbon nitride photocatalysts with glycine modification to enhance photocatalytic activities.     

ZnO-based ternary nanocomposite for decolorization of methylene blue by photocatalytic dynamic membrane

In this article, novel Ag–ZnO/g-C₃N₄/GO ternary nanocomposites were prepared via co-precipitation method by 1%w Ag, 50% w g-C₃N₄, 10% w GO concentration and applied in dynamic membranes. The characteristics of Ag–ZnO/g-C₃N₄/GO nanocomposite were evaluated by various techniques such as X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray map, transmission electron microscopy, X-ray photoelectron spectroscopy, photocatalyst. The photocatalytic degradation of methylene blue was investigated under visible light. The photocatalytic efficiency of 93.43% for methylene blue degradation was obtained for Ag–ZnO/g-C₃N₄/GO nanocomposite after 50 min of irradiation, which was remarkably higher than that of pure ZnO, bare g-C₃N₄, Ag–ZnO, and Ag–ZnO/g-C₃N₄ at the same irradiation time. Likewise, in self-forming and pre-coated membranes, ternary nanocomposites can play a vital role in the membrane surface properties, as well as their decolorization performance. The rejection of methylene blue was 30% in pure polyethersulfone membrane, while the photocatalytic degradation of methylene blue in Ag–ZnO/g-C₃N₄/GO nanocomposites was 88.46% and 98.86% after 10 and 15 min of irradiation in both self-forming and pre-coated dynamic membranes, respectively. Experimental results show that the dynamic membrane possesses a higher ability for degradation of MB in a shorter period of time than the static system.     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄ S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-VisDRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B (RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄ S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe³⁺的加入促进了光生电荷的分离和H₂O₂的活化,超氧阴离子自由基(·O₂^-)、空穴和羟基是光-自芬顿催化过程中的主要活性物种,且·O₂^-作用更大。     

BiOBr/g-C3N4 S型异质结无H2O2光-自芬顿高效催化降解RhB

通过焙烧-超声混合法成功地制备了BiOBr/g-C₃N₄S型异质结复合光催化剂。采用多种表征手段对样品物理属性进行了表征,包括X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、紫外可见漫反射光谱(UV-Vis DRS)。研究了所制备样品有/无Fe³⁺的光-自芬顿催化/光催化降解罗丹明B(RhB)性能。通过捕获实验确定了光催化反应中的主要活性物种,提出了光-自芬顿反应的降解机理。研究结果表明,BiOBr/g-C₃N₄S型异质结能原位生成H₂O₂,添加Fe³⁺后,H₂O₂被原位活化成活性物种且光生电流和载流子分离效率获得显著提高。该光-自芬顿过程能高效降解RhB,其反应速率常数为0.208 min^-1,约为无Fe³⁺光催化反应速率常数的5.3倍,在光-自芬顿循环使用过程中表现出良好的稳定性。Fe...     

Ag nanoparticles loaded on porous graphitic carbon nitride with enhanced photocatalytic activity for degradation of phenol

Highly efficient photocatalyst of visible-light-driven Ag nanoparticles loaded on porous graphitic carbon nitride (g-C₃N₄) was prepared by the reduction of Ag ions on porous g-C₃N₄. The obtained Ag/porous g-C₃N₄ composite products were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), UV-vis diffuse reflection spectra (DRS), thermal gravimetric analysis (TGA). The results demonstrated that a homogeneous distribution of Ag NPs of 10 nm was attached onto the surface of the porous g-C₃N₄. The prepared Ag/porous g-C₃N₄ samples were applied for catalyzing the degradation of phenol in water under visible light irradiation. Porous g-C₃N₄ demonstrated an excellent support for the formation and dispersion of small uniform Ag NPs. When the weight percentage of Ag reaches 5%, the nanohybrid exhibits superior photocatalytic activities compared to bulk g-C₃N₄, porous g-C₃N₄, and 2% Ag/porous g-C₃N₄ hybrids. The enhanced photocatalytic performance is due to the synergic effect between Ag and porous g-C₃N₄, which suppressed the recombination of photogenerated electron-hole pairs.     

石墨相氮化碳的化学合成及应用

石墨相氮化碳(g-C₃N₄)具有独特的电子结构和优异的化学稳定性, 近年来不仅被作为不含金属组分的催化剂和催化剂载体, 广泛地应用于有机官能团的选择性转换、光催化分解水、氧还原和Au、Pd、Ag、Pt等贵金属的负载, 还被作为绿色储能材料和硬模板剂用于H₂、CO₂的存储和纳米金属氮(氧)化物的制备等, 在能源和材料相关领域逐渐引起人们的关注. 本文将从材料的制备和应用角度,综述国内外同行近年来在g-C₃N₄研究中所取得的一些重要进展, 并对其未来发展趋势,特别是在能源和环境领域中的应用进行了展望.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.     

Photocatalytic activity under visible light illumination of organic dyes over g-C3N4/MgAl2O4 nanocomposite

Using a grinding method, nanocomposites of graphitic carbon nitride (g-C₃N₄) and magnesium aluminate (MgAl₂O₄) spinel were successfully synthesized for the photocatalytic degradation of methylene blue (MB) and methyl orange (MO). Variously formulated g-C₃N₄/MgAl₂O₄ nanocomposites were characterized by thermal gravimetric analysis (TGA), X-ray diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy equipped with energy dispersive spectroscopy (SEM/EDS), transmission electron microscopy (TEM) and surface area and micropore analysis (BET surface area). The g-C₃N₄ powder exhibited a nanosheet structure whereas the MgAl₂O₄ spinel comprised agglomerated nanoparticles. The optical properties of the g-C₃N₄/MgAl₂O₄ nanocomposites were investigated by diffuse reflectance spectroscopy (DRS). As the g-C₃N₄ loading content increased from 0 to 30%, the optical band gap energy of the nanocomposite decreased from 3.84 to 2.86 eV, the specific surface area decreased from 153.78 to 114.45 m²/g, and the porosity decreased from 0.447 to 0.347 cm³/g. A 20%g-C₃N₄/MgAl₂O₄ nanocomposite proved to be the most effective photocatalyst and degraded MB faster and more completely than MO. The degradation rates of both MO (0.0107 min^?1) and MB (0.0386 min^?1) in a mixed MO-MB system were greater than the degradation rates in their single systems. The key factor that improved the photocatalytic degradation of MO was the synergistic effect whereas the synergistic effect and photosensitization were the key factors that enhanced the photocatalytic degradation of MB. The g-C₃N₄/MgAl₂O₄ nanocomposite is suitable for the photocatalytic degradation of mixed dyes because its point of zero charge is neutral and it is stable and recyclable.     

Novel PtPd alloy nanoparticle-decorated g-C3N4 nanosheets with enhanced photocatalytic activity for H2 evolution under visible light irradiation

PtPd bimetallic alloy nanoparticle (NP)-modified graphitic carbon nitride (g-C₃N₄) nanosheet photocatalysts were synthesized via chemical deposition precipitation. Characterization of the photocatalytic H₂ evolution of the g-C₃N₄ nanosheets shows that it was significantly enhanced when PtPd alloy NPs were introduced as a co-catalyst. The 0.2 wt% PtPd/g-C₃N₄ composite photocatalyst gave a maximum H₂ production rate of 1600.8 μmol g^–1 h^–1. Furthermore, when K₂HPO₄ was added to the reaction system, the H₂ production rate increased to 2885.0 μmol g^–1 h^–1. The PtPd/g-C₃N₄ photocatalyst showed satisfactory photocatalytic stability and was able to maintain most of its photocatalytic activity after four experimental photocatalytic cycles. In addition, a possible mechanism for the enhanced photocatalytic activity was proposed and verified by various photoelectric techniques. These results demonstrate that the synergistic effect between PtPd and g-C₃N₄ helps to greatly improve the photocatalytic activity of the composite photocatalyst.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

C/g-C3N4/MoS2复合材料的制备及光催化性能

首先以尿素和葡萄糖为前驱体,通过热缩合方法制备了C/g-C₃N₄,然后利用溶剂热法合成C/g-C₃N₄/MoS₂三元复合材料。通过不同的手段对其进行了表征,结果表明,与C/g-C₃N₄相比,该三元复合材料不仅具有更强的光吸收性能和更大的表面积,而且更有利于电子的转移。同时对其可见光催化降解甲基橙性能进行研究,结果发现,C/g-C₃N₄/MoS₂-2.0%复合材料(含有质量分数为2.0%的MoS₂)表现出最高的反应速率常数(0.0086 min^-1),分别为g-C₃N₄/MoS₂-2.0%(0.0015 min^-1)和C/g-C₃N₄(0.0036min^-1)的5.7倍和2.3倍。     

静电纺丝制备g-C3N4/C纳米纤维及其可见光降解性能

采用g-C₃N₄纳米片与聚丙烯腈进行静电复合纺丝,再经预氧化和碳化制得g-C₃N₄/C纳米纤维。利用傅立叶变换红外光谱仪（FTIR）、X射线衍射仪（XRD）、拉曼光谱（Raman）和扫描电子显微镜（SEM）对样品结构和形貌进行表征,通过紫外-可见漫反射光谱（UV-Vis DRS）分析可见光响应性。研究表明,复合纳米纤维对罗丹明B表现出较好的可见光降解活性,源于无定形相/石墨相混合结构的碳基体能够降低g-C₃N₄的光生电子-空穴对复合的几率。复合纳米纤维膜在光催化降解搅拌条件下始终能保持完整,经过多次回收和光催化实验,对罗丹明B的光降解率依然较高,表现出较优异的循环利用稳定性。     

静电纺丝制备g-C3N4/C纳米纤维及其可见光降解性能

采用g-C_3N_4纳米片与聚丙烯腈进行静电复合纺丝,再经预氧化和碳化制得g-C_3N_4/C纳米纤维。利用傅立叶变换红外光谱仪(FTIR)、X射线衍射仪(XRD)、拉曼光谱(Raman)和扫描电子显微镜(SEM)对样品结构和形貌进行表征,通过紫外-可见漫反射光谱(UV-Vis DRS)分析可见光响应性。研究表明,复合纳米纤维对罗丹明B表现出较好的可见光降解活性,源于无定形相/石墨相混合结构的碳基体能够降低g-C_3N_4的光生电子-空穴对复合的几率。复合纳米纤维膜在光催化降解搅拌条件下始终能保持完整,经过多次回收和光催化实验,对罗丹明B的光降解率依然较高,表现出较优异的循环利用稳定性。     

中空管状g-C3N4/Ag3PO4复合催化剂的制备及其可见光催化性能

采用化学沉淀法制备中空管状 g-C₃N₄/Ag₃PO₄复合催化剂。通过 X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外可见漫反射光谱(UV-Vis DRS)和荧光光谱对其结构、形貌和光学性能进行了表征。结果表明：Ag₃PO₄纳米颗粒均匀地分散在中空管状g-C₃N₄表面,两者紧密结合形成异质结。研究复合催化剂在可见光照射下降解盐酸四环素(TC)的光催化活性。结果显示：复合催化剂在80 min内对TC的降解率为98%,其降解反应速率常数是纯相Ag₃PO₄的3倍。经过5次循环实验后复合催化剂对于TC的降解率仍保持87%,具有优良的循环稳定性。捕获实验表明空穴(h⁺)和超氧负离子(·O₂^ˉ)是光催化反应过程中的主要活性物种。根据能带理论,提出了复合催化剂异质结的Z型光催化机理。     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C_3N_4纳米管。热解过程中碳酸氢铵分解释放出大量的NH3,能够诱导纳米管的形成。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)、N_2吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱(UV)等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C_3N_4纳米管的光催化活性。g-C_3N_4纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。