Mixed Boron(III) and Phosphorous(V) Complexes of meso‐Triaryl 25‐Oxasmaragdyrins

Two unprecedented mixed B^III/P^V complexes of meso‐triaryl 25‐oxasmaragdyrins were synthesized in appreciable yields under mild reaction conditions. These unusual 25‐oxasmaragdyrin complexes containing one or two seven‐membered heterocyclic rings comprised of five different atoms (B, C, N, O, and P) were prepared by reacting B(OH)(Ph)‐smaragdyrin and B(OH)₂‐smaragdyrin complexes, respectively, with POCl₃ in toluene at reflux temperature. The products were characterized by HRMS and 1D‐ and 2D‐NMR spectroscopy. X‐ray crystallography of one of the mixed B^III/P^V smaragdyrin complexes indicated that the macrocycle is significantly distorted and contains a stable seven‐membered heterocyclic ring within the macrocycle. The bands in the absorption and emission spectra were bathochromically shifted with reduced quantum yields and singlet‐state lifetimes relative to the free base, meso‐triaryl 25‐oxasmaragdyrin. The mixed B^III/P^V complexes were difficult to oxidize but easier to reduce than the free base. The DFT‐optimized structure of the 25‐oxasmaragdyrin complex with two seven‐membered heterocycles indicated that it was a bicyclic spiro compound with two half‐chair‐like conformers. This was in contrast to the chair‐like conformation of the complex with a single seven‐membered heterocyclic ring. Moreover, incorporation of a second phosphate group in the former case stabilized the bonding geometry and resulted in higher stability, which was reflected in the bathochromic shift of the absorption spectra, more‐positive oxidation potential, and less‐negative reduction potential.     

Water Soluble Nickel – metformin ternary complexes: Thermal,DNA binding and molecular docking studies

The Nickel (II) complexes [Ni(Cl)₂(metf)(o-phen)] (1), [Ni(Cl)₂(metf)(opda)] (2) , [Ni(Cl)₂(metf)(en)] (3) , [Ni(Cl)₂(metf)(2,2'-bipy)] (4) , (metf = metformin, o-phen = ortho-phenanthroline, opda = ortho-phenylenediamine, en = ethylenediamine, 2–2′ bipy = 2–2′ bipyridyl) were synthesized and characterized using LC–MS, elemental analysis, molar conductance measurements, TGA-DTA, IR spectroscopy, magnetic moment measurements and electronic spectroscopy. The central Ni²⁺ was found to be in octahedral geometry. The DNA interaction of these complexes have been studied by UV–visible absorption studies, fluorescence emission technique and viscosity measurement. The complexes showed absorption hyperchromism in UV–visible spectra with calf thymus DNA. The binding constants from UV–visible absorption studies were 7.42 × 10⁴, 0.74 × 10⁴, 3.19 × 10⁴, 5.9 × 10⁴ M⁻¹ for 1 , 2 , 3 and 4 , respectively and Stern-Volmer quenching constants from fluorescence studies were 0.16, 0.41, 0.23, 0.18, respectively. Viscosity measurements revealed that the binding of the complexes with DNA could be surface binding, mainly due to groove binding. The highest DNA cleavage activity of the complexes is recorded for complex 1 . The complexes were docked in to B-DNA sequence, 5′(D*AP*CP*CP*GP*AP*CP* GP*TP*CP*GP*GP*T)-3′ retrieved from protein data bank (PDB ID: 423D), using Discovery Studio 2.1 software. C Docker Intectraction energy of 1 , 2 , 3 and 4 complexes is 32.027, 31.427, 35.393 and 30.521 respectively. The highest docking score is seen for complex 3 .     

Synthesis and biological evaluation of some new class of benzothiazole–pyrazole ligands containing arene ruthenium,rhodium and iridium complexes

Transition Metal Chemistry - Metal complexes 1–9 have been synthesized by reacting the benzothiazole–pyrazole derivative ligands (L1, L2 and L3) with the metal precursors of ruthenium...     

Preparation of self-assembled porous flower-like nanostructured magnetite (Fe3O4) electrode material for supercapacitor application

Journal of Solid State Electrochemistry - Nanostructured electrode materials for supercapacitors have attracted research interest due to their high power density and long cycle life. Herein, porous...     

Facile synthesis methodology and characterization studies of silica-decorated hybridized anisotropic nanotubes and nanosheets

Carbonaceous nanomaterials and their derivatives have been inspired tremendous enthusiasm in the scientific community. They have been excogitated as the encouraging attributes and the qualified dispersed phase to develop multi-functional composites. Particularly, graphene and carbon nanotube (anisotropic fillers) have gained substantial research interest owing to their promising characteristics. This highlights an innovative technique to synthesize hybridized nanotube and nanosheet. Initially, parent materials have been synthesized: The pristine CNT has been modified by acid mixture solution, and reduced graphene oxide has been prepared by chemical reduction method. Henceforth, the self-assembly in situ sol–gel technique has been endorsed here. The synthesized nanohybrids have been characterized by different spectroscopic techniques: FTIR, Raman, UV, and XPS to confirm the attachment of multifunctionalities; meanwhile, the composition and stability have been investigated from XRD and TGA plots. The magnitude of surface charge and particle size distribution have been evaluated for the parent and hybridized products; further, morphology of all the samples has been authenticated from FESEM and TEM.     

Nonsteroidal Anti‐inflammatory Drug‐based N‐Allylidene Benzohydrazides and 1‐Acyl‐2‐pyrazolines: Their Synthesis as Potential Cytotoxic Agents In Vitro

A series of 1‐acyl‐2‐pyrazoline derivatives derived from nonsteroidal anti‐inflammatory drugs was designed as potential anticancer agents. Synthesis of these compounds was carried out via the condensation reaction of chalcones and acid hydrazides under heating. The methodology did not require the use of any costly reagents or catalysts, and the acid hydrazide reactants were readily prepared from mefenamic acid or ibuprofen. A variety of 1‐acyl‐2‐pyrazolines was prepared in good to excellent yields. An N‐allylidene benzohydrazide intermediate was isolated during the reaction optimization study, the structure of which was confirmed unambiguously by X‐ray single crystal data. A range of N‐allylidene benzohydrazides were also prepared in good yields. Some of the compounds synthesized showed promising cytotoxic activities when tested against HCT‐15 human colon cancer cell line in vitro.     

Development of Pen-type Portable Electrochemical Sensor Based on Au-W Bimetallic Nanoparticles Decorated Graphene-chitosan Nanocomposite Film for the Detection of Nitrite in Water,Milk and Fruit Juices

The development and fabrication of a simple, portable, and sensitive detection tool to precisely monitor nitrite level is of growing importance in electrochemistry research, given the strong interest in the protection of drinking water quality, treatment of wastewater, food production, and control of remediation processes. This work describes the fabrication of a simple, cost-effective, pen-type electrochemical sensor based on bimetallic gold and tungsten nanoparticles electrochemically decorated on graphene-chitosan modified pencil graphite electrode (PGE) for the trace detection of nitrite in real samples. The prepared nanocomposite was characterized using XRD, SEM, and EDS. The electrochemical behavior of the sensor was evaluated by cyclic voltammetry (CV) and impedance electrochemical spectroscopy (EIS). Results revealed that the proposed sensor displayed excellent electrocatalytic activity towards electro-oxidation of nitrite with an irreversible redox reaction. The AuNPs-WNPs@Gr-Chi/PGE sensor exhibited excellent analytical performance with a wide linear range from 10 to 250 μM towards nitrite. The LOD and LOQ were calculated to be 0.12 μM and 0.44 μM, respectively. The designed electrochemical sensor was successfully applied for the detection of nitrite in water, milk, and natural fruit juice samples.     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

Molecular Cloning,Characterization, and Expression Analysis of Lignin Genes from Sugarcane Genotypes Varying in Lignin Content

Sugarcane (Saccharum spp.) is one of the highest biomass-producing plant and the best lignocellulosic feedstock for ethanol production. To achieve more efficient conversion of biomass to ethanol, a better understanding of the main factors affecting biomass recalcitrance is needed. Therefore, with this objective, here, we report a systematic study on lignin content, deposition, identification, and cloning of genes involved in lignin biosynthesis and their differential expression in five sugarcane clones, EC11003, EC11010, IK 76-91, IK 76-99, and Co 86032. Lignin content among the clones varied from 26.87 to 23.19 % with the highest in the clone EC11010 and the lowest in high sugar Co86032. Lignin deposition studied through phloroglucinol staining of the cell walls implied that the sclerenchyma cells of the energy canes (EC11010 and EC11003) have more lignin deposition followed by the Erianthus (IK 76-91 and IK 76-99) clones whereas Co86032 has the minimum amount of lignin deposition. We cloned partial coding regions of important genes of lignification COMT (650 bp), CCR (332 bp), and PAL (650 bp) from Erianthus, wild relative of sugarcane followed by the expression analysis through real-time PCR. Differential expression analysis showed high level of expression for the three genes in the energy cane EC11010.