Determination of Anti-Parkinson Drug Pramipexole Using a Label-free Biosensor and Evaluation of its Interaction with ds-DNA

In this study, we fabricated an effective and sensitive DNA biosensor based on flower-like Pt/NiCo₂O₄ modified carbon paste electrode (FL-Pt/NiCo₂O₄/CPE) for detection of pramipexole (PPX). Spectrophotometry, differential pulse voltammetry (DPV) and docking methods were employed to evaluate the interaction of DNA-PPX. Moreover, the DPV technique was chosen to monitor the electrochemical response of guanine on the DNA biosensor. The relationship between the concentration of PPX and the oxidation signal of guanine was linear in the range of 0.4 to 310.0 μM and a limit of detection (LOD) of 0.09 μM was calculated.     

A High Sensitive,Reproducible and Disposable Immunosensor for Analysis of SOX2

In this study, an ITO (indium tin oxide) based biosensor was constructed to detect SOX2. SOX2 helps the regulation of cell pluripotency and is closely related to early embryonic development, neural and sexual differentiation. SOX2 is amplified and overexpressed in some malignant tumors such as squamous cell, lung, prostate, breast, esophageal cell, colon, ovarian, glioblastoma, pancreatic cancer, gastric cancer, head and neck squamous cell carcinoma. To generate a hydroxylated clean electrode surface, ITO electrodes were treated with NH₄OH/H₂O₂/H₂O. Later, ITO‐PET electrode surfaces were modified with 3‐glycidoxypropyl trimethoxysilane (3‐GOPS). Then, Anti‐SOX2 was covalently immobilized onto the electrode surfaces. 3‐GOPS concentration, Anti‐SOX2 concentration and incubation time, SOX2 incubation time were optimized. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were utilized in order to follow up the immobilization processes and the optimization steps of the biosensor. To characterize the analytical properties of constructed immunosensor; linear range, repeatability, reproducibility and regeneration studies were investigated. The linear range of the immunosensor was detected as 0.625 pg/mL–62.5 pg/mL. Square wave voltammetry technique was also applied to the biosensor. Storage life of the biosensor was determined for identifying the possible usability of the biosensor in clinical field. Finally, the designed biosensor was applied to the real human serum samples. The results obtained with the presented biosensor were also compared with ELISA results.     

Electrochemical Determination of Sertraline at Screen Printed Electrode Modified with Feather Like La3+/ZnO Nano-Flowers and Its Determination in Pharmaceutical and Biological Samples

Russian Journal of Electrochemistry - In this paper, the use of a screen printed electrode modified by feather like La3+/ZnO nano-flowers for the determination of sertraline was described. These...     

Host–Guest Assembly of a Molecular Reporter with Chiral Cyanohydrins for Assignment of Absolute Stereochemistry

The absolute stereochemistry of cyanohydrins, derived from ketones and aldehydes, is obtained routinely, in a microscale and derivatization‐free manner, upon their complexation with Zn‐MAPOL, a zincated porphyrin host with a binding pocket comprised of a biphenol core. The host–guest complex leads to observable exciton‐coupled circular dichroism (ECCD), the sign of which is easily correlated to the absolute stereochemistry of the bound cyanohydrin. A working model, based on the ECCD signal of cyanohydrins with known configuration, is proposed.     

Frequencies Rotation at High Sound Pressure Levels Toward Low Frequencies

Today, analyzing of sound pressure level and frequency is considered as an important index in human society. Sound experts believe that analyzing of these parameters can help us to better understanding of work environments. Sound measurements and frequency analysis did to fix the harmful frequency in all sections in Shiraz gas power plant with sound analyzer model BSWA 308. The sound pressure levels (L_P) and the one and one-third octave band were continuously measured in A and C weighting networks and slow mode for time response. Excel 2013 and Minitab 18.1 software used for statistical calculations. Results analyzed by Minitab 18.1 software. The highest harmful frequency in Shiraz Gas Power Plant (SGPP) was 50 Hz with 115 dB. The sound pressure level (SPL) ranged from 45 dB to 120 dB in one-third octave band and weighting network C. The maximum sound pressure level was in Craft electricity generator with 105.3 dB and 67 Hz. Sound pressure level in surrounded environment was 120 dB. According to the results, in this industry the sound pressure level exceeded the Occupational Exposure Level of Iran (OEL). The value of sound pressure level were higher than the Standard of occupational health. SGPP consumes 47000 cubic meters of natural gas per hour to produce 100 MW (Mega Watt) of electricity. It is very high and it is not economical and cost effective. These numbers indicate that the power plant’s efficiency is low. It could be concluded that the noise pollution is an important issue in these industries. Moreover, SGPP produce noise with loss energy. Frequencies rotation at high sound pressure levels toward low frequencies were happened.     

Dissolution optimization and kinetics of nickel and cobalt from iron-rich laterite ore,using sulfuric acid at atmospheric pressure

More than 70% of the world's nickel reserves are found in laterite ores. In this research, a laterite ore sample, containing Ni, Co, and Fe, was employed to study the recovery of nickel and cobalt. Thus, the effect of calcination, acid concentration, percent solids, and stirring rate on nickel and cobalt recoveries from an iron-rich laterite sample was investigated. Optimization with response surface methodology and kinetic studies were performed. The calcination of the sample prior to leaching at 500°C for 2 h provided condition for better nickel and cobalt dissolutions. At optimal conditions, the concentration of sulfuric acid, solid-to-liquid ratio, stirring speed, temperature, and time test were equal to 5 M, 0.1, 370 rpm, 90°C, and 2 h, respectively. The highest recoveries of nickel and cobalt were 65.9% and 63.1%, respectively. Solids content had a negative effect on Ni and Co recovery, whereas acid concentration was positively affected. Addition of 10% (w/v) NaCl in the presence of 5 M acid concentration, 60°C, 370 rpm, and leaching time of 2 h increased the nickel and cobalt recoveries, 15.3% and 21.4%, respectively. The high dependence of process on temperature indicates chemical control; the activation energies E_a = 59.54 and E_a = 45.74 kJ/mol, respectively, for nickel and cobalt, were also consistent with this conclusion.     

An Update on Molecularly Imprinted Polymer Design through a Computational Approach to Produce Molecular Recognition Material with Enhanced Analytical Performance

Molecularly imprinted polymer (MIP) computational design is expected to become a routine technique prior to synthesis to produce polymers with high affinity and selectivity towards target molecules. Furthermore, using these simulations reduces the cost of optimizing polymerization composition. There are several computational methods used in MIP fabrication and each requires a comprehensive study in order to select a process with results that are most similar to properties exhibited by polymers synthesized through laboratory experiments. Until now, no review has linked computational strategies with experimental results, which are needed to determine the method that is most appropriate for use in designing MIP with high molecular recognition. This review will present an update of the computational approaches started from 2016 until now on quantum mechanics, molecular mechanics and molecular dynamics that have been widely used. It will also discuss the linear correlation between computational results and the polymer performance tests through laboratory experiments to examine to what extent these methods can be relied upon to obtain polymers with high molecular recognition. Based on the literature search, density functional theory (DFT) with various hybrid functions and basis sets is most often used as a theoretical method to provide a shorter MIP manufacturing process as well as good analytical performance as recognition material.     

Determination of Cadmium and Selenium in Food Samples by Electrothermal Atomic Absorption Spectrometry using Ni + Pt Modifier Mixture

Journal of Analytical Chemistry - Determination of cadmium and selenium in food samples mostly consumed in Turkey has been performed by electrothermal atomic absorption spectrometry using Ni + Pt...