A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance‐improved and cost‐reduced solid‐solution alloy nanoparticles of the Cu‐Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_xRu_1?x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.     

Synthesis of Bis(phosphanyl)alkane Monosulfides by the Addition of Diphosphane Monosulfides to Alkenes under Light

Bis-phosphanated compounds are regarded as the most ubiquitous privileged ligand structures in transition-metal catalysis. The development of highly atom economical reactions is of great importance for their syntheses because less atom economical methods often require complicated purification procedures under inert atmospheres to remove excess starting materials and byproducts. Herein, the photoinduced addition reactions of diphosphane monosulfides bearing P^V(S)−P^III single bonds to alkenes is disclosed. These reactions require only equimolar amounts of the diphosphane monosulfide relative to the alkene and facilitate highly selective introduction of two different types of phosphorus-containing groups, such as thiophosphoryl and phosphanyl groups, into a variety of alkenes without any catalyst, base, or additive.     

The Impact of C2 Insertion into a Carbazole Donor on the Physicochemical Properties of Dibenzo[a,j]phenazine-Cored Donor–Acceptor–Donor Triads

Novel electron donor–acceptor–donor (D-A-D) compounds comprising dibenzo[a,j]phenazine as the central acceptor core and two 7-membered diarylamines (iminodibenzyl and iminostilbene) as the donors have been designed and synthesized. Investigation of their physicochemical properties revealed the impact of C₂ insertion into well-known carbazole electron donors on the properties of previously reported twisted dibenzo[a,j]phenazine-core D-A-D triads. Slight structural modification caused a drastic change in conformational preference, allowing unique photophysical behavior of dual emission derived from room-temperature phosphorescence and triplet–triplet annihilation. Furthermore, electrochemical analysis suggested sigma-dimer formation and electrochemical polymerization on the electrode. Quantum chemical calculations also rationalized the experimental results.     

Unconventional Magnetic and Resistive Hysteresis in an Iodine‐Bonded Molecular Conductor

Simultaneous manipulation of both spin and charge is a crucial issue in magnetic conductors. We report on a strong correlation between magnetism and conductivity in the iodine‐bonded molecular conductor (DIETSe)₂FeBr₂Cl₂ [DIETSe=diiodo(ethylenedithio)tetraselenafulvalene], which is the first molecular conductor showing a large hysteresis in both magnetic moment and magnetoresistance associated with a spin‐flop transition. Utilizing a mixed‐anion approach and iodine bonding interactions, we tailored a molecular conductor with random exchange interactions exhibiting unforeseen physical properties.     

Simultaneous measurements of velocity and temperature fluctuations in thermal boundary layer in a drag-reducing surfactant solution flow

The mechanism of turbulent heat transfer in the thermal boundary layer developing in the channel flow of a drag-reducing surfactant solution was studied experimentally. A two-component laser Doppler velocimetry and a fine-wire thermocouple probe were used to measure the velocity and temperature fluctuations simultaneously. Two layers of thermal field were found: a high heat resistance layer with a high temperature gradient, and a layer with a small or even zero temperature gradient. The peak value of was larger for the flow with the drag-reducing additives than for the Newtonian flow, and the peak location was away from the wall. The profile of was depressed in a similar manner to the depression of the profile of in the flow of the surfactant solution, i.e., decorrelation between v and compared with decorrelation between u and v. The depression of the Reynolds shear stress resulted in drag reduction; similarly, it was conjectured that the heat transfer reduction is due to the decrease in the turbulent heat flux in the wall-normal direction for a flow with drag-reducing surfactant additives.List of symbols ensemble averaged value - (·)⁺ normalized by the inner wall variables - (·) root-mean-square value - C concentration of cetyltrimethyl ammonium chloride (CTAC) solution - c _p heat capacity - D hydraulic diameter - f friction factor - H channel height - h heat transfer coefficient - j _H Colburn factor - l length - Nu Nusselt number, h - Pr Prandtl number, c _p/ - q _w wall heated flux - Re Reynolds number, U _b/ - T temperature - T _b bulk temperature - T _i inlet temperature - T _w wall temperature - T friction temperature, q _w /c _p u - U local time-mean streamwise velocity - U ₁ velocity signals from BSA1 - U ₂ velocity signals from BSA2 - U _b bulk velocity - u streamwise velocity fluctuation - u1 velocity in abscissa direction in transformed coordinates - u friction velocity, - v wall-normal velocity fluctuation - v1 velocity in ordinate direction in transformed coordinates - var(·) variance - x streamwise direction - y wall-normal direction - z spanwise direction - _j junction diameter of fine-wire TC - _w wire diameter of fine-wire TC - angle of principal axis of joint probability function p(u,v) - _f heat conduction of fluid - _w heat conduction of wire of fine-wire TC - kinematic viscosity - local time-mean temperature difference, T _w –T - temperature fluctuation - standard deviation - density - _w wall shear stress     

On the electronic structure and hydrogen evolution reaction activity of platinum group metal-based high-entropy-alloy nanoparticles

We report the synthesis of high-entropy-alloy (HEA) nanoparticles (NPs) consisting of five platinum group metals (Ru, Rh, Pd, Ir and Pt) through a facile one-pot polyol process. We investigated the electronic structure of HEA NPs using hard X-ray photoelectron spectroscopy, which is the first direct observation of the electronic structure of HEA NPs. Significantly, the HEA NPs possessed a broad valence band spectrum without any obvious peaks. This implies that the HEA NPs have random atomic configurations leading to a variety of local electronic structures. We examined the hydrogen evolution reaction (HER) and observed a remarkably high HER activity on HEA NPs. At an overpotential of 25 mV, the turnover frequencies of HEA NPs were 9.5 and 7.8 times higher than those of a commercial Pt catalyst in 0.05 M H₂SO₄ and 1.0 M KOH electrolytes, respectively. Moreover, the HEA NPs showed almost no loss during a cycling test and were much more stable than the commercial Pt catalyst. Our findings on HEA NPs may provide a new paradigm for the design of catalysts.

RuRhPdIrPt high-entropy-alloy nanoparticles with a broad and featureless valence band spectrum show high hydrogen evolution reaction activity.     

Synthetic Studies on Spirolides A and B: Formation of the Upper Carbon Framework Based on a Lewis Acid Template-Catalyzed Diels–Alder Reaction

The upper fragment of spirolides A and B, which are marine phycotoxins that exhibit strong antagonistic activities on nicotinic acetylcholine receptors, was constructed. The functionalized cyclohexene in spirolides was stereoselectively synthesized from the bicyclic lactone, which could be readily accessed by the Lewis acid template-catalyzed asymmetric Diels–Alder reaction of the pentadienol and methyl acrylate.     

Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Surface dilational moduli of polymer and blended polymer monolayers spread at air-water interfaces

Surface dilational moduli of polymer monolayers, blended polymer monolayers, and polymer particle monolayers spread at air–water interfaces are reviewed, focusing on measurements using surface pressure isotherm, surface pressure relaxation, and oscillating barrier methods. Differences between the surface dilational moduli of condensed polymer monolayers and expanded polymer monolayers are explored. Moreover, the features of the surface dilational moduli in blended polymer monolayers are discussed in terms of their miscibility.