Improved Method for the Total Synthesis of Azaperone and Investigation of Its Electrochemical Behavior in Aqueous Solution

Azaperone, with anti-anxiety and anti-aggressive activities used in veterinary medicine, is a member of the butyrophenone class. It is ordinarily utilized for a wide range of indications, such as sedation, obstetrics, and anesthesia. In this research, an improved synthetic route is presented for azaperone using a phase-transfer catalyst(PTC). In general, it was synthesized as a dopamine antagonist in four steps. The bis(2-chloroethyl) amine intermediate is easily obtained after the conversion of the alcohol groups into the chloride leaving group using thionyl chloride(95% yields). The alkylation of commercially available 2-amino pyridine in the presence of PTC was then carried out, giving 1-(pyridin-2-yl) piperazine with 75% yield. 1-(Pyridin-2-yl) piperazine was finally alkylated using 4-chloro-1-(4-fluorophenyl) butan-1-one to achieve azaperone with 60% yield. The butyrophenone intermediate was obtained via the Friedel-Crafts reaction of fluorobenzene with 4-chlorobutyryl chloride in the presence of AlCl₃. High efficiency, gentle reaction conditions, and fast and simple procedure are the advantages of this method. Also, the electrochemical oxidation behaviour of azaperone was investigated using cyclic and differential pulse voltammetry techniques. Cyclic voltammetric studies indicated an irreversible process for azaperone electro-oxidation with a peak potential of 0.78 V in a phosphate buffer solution(pH=7.0) vs. Ag/AgCl(saturated KCl) electrode. The value of the peak current vs. the azaperone concentration was enhanced linearly in the range of 10―70 μmol/L, and the detection limit was found to be 3.33 μmol/L.     

Caesium carbonate supported on hydroxyapatite‐encapsulated Ni0.5Zn0.5Fe2O4 nanocrystallites as a novel magnetically basic catalyst for the one‐pot synthesis of pyrazolo[1,2‐b]phthalazine‐5,10‐diones

A novel nanomagnetic basic catalyst of caesium carbonate supported on hydroxyapatite‐coated Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles (Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃) was prepared. This new catalyst was fully characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopy, X‐ray diffraction and vibrating sample magnetometry techniques, and then the catalytic activity of this catalyst was investigated in the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐dione derivatives. Also, Ni_0.5Zn_0.5Fe₂O₄@HAP‐Cs₂CO₃ could be reused at least five times without significant loss of activity and could be recovered easily by applying an external magnet. Thus, the developed nanomagnetic catalyst is potentially useful for the green and economic production of organic compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Torsional vibration of functionally graded nano-rod under magnetic field supported by a generalized torsional foundation based on nonlocal elasticity theory

Abstract

This article contains the nonlocal elasticity theory to capture size effects in functionally graded (FG) nano-rod under magnetic field supported by a torsional foundation. Torque effect of an axial magnetic field on an FG nano-rod has been defined using Maxwell’s relation. The material properties were assumed to vary according to the power law in radial direction. The Navier equation and boundary conditions of the size-dependent FG nano-rod were derived by the Hamilton’s principle. These equations were solved by employing the generalized differential quadrature method (GDQM). Presented model has the ability to turn into the classical model if the material length scale parameter is taken to be zero. The effects of some parameters, such as inhomogeneity constant, magnetic field and small-scale parameter, were studied. As an important result of this study can be stated that an FG nano-rod model based on the nonlocal elasticity theory behaves softer and has smaller natural frequency.     

Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Solubility prediction of deferiprone in N-methyl-2-pyrrolidone + ethanol mixtures at various temperatures using a minimum number of experimental data

Experimental solubility of deferiprone (DFP) in N-methyl-2-pyrrolidone (NMP) + ethanol (EtOH) mixtures at 293.2, 298.2, 303.2 and 308.2 K was determined and mathematically represented using various models. The trained versions of the van’t Hoff equation, its combined version with log-linear model, Jouyban–Acree model and a combination of van’t Hoff + Jouyban–Acree model were reported to simulate DFP solubility in the binary mixture compositions at various temperatures. The mean percentage deviation (MPD) was used as an accuracy criterion. The obtained overall MPDs for back-calculated and predicted solubility of DFP in NMP + EtOH mixtures varied from 1.1% to 3.2% and 2.6% to 6.6%, respectively. Some of apparent thermodynamic quantities for the dissolution processes of DFP are also reported.     

Intramolecular cyclization of <Emphasis Type="Italic">N</Emphasis>-propargyl anilines: a new synthetic entry into highly substituted indoles

Indole derivatives are an important class of heterocycle found in a large number of natural products and synthetic pharmaceuticals. Given the low cost and easy availability of N-propargyl anilines, synthesis of indole cores from these versatile structural motifs has attracted a lot of attention in the past decade. In this review, we summarize the most representative and interesting reports on this rapidly advancing area, with special emphasis on mechanistic aspects of the reactions.     

A computational quest for the effects of fused rings on the stability of Hammick carbenes type remote N‐heterocyclic carbenes

Substituent effects of fused six, and five‐membered aromatic rings are investigated on the stability, aromaticity, charge distribution, nucleophilic (N), and electrophilic (ω) characters of 20 singlet (s) and triplet (t) Hammick carbenes, at B3LYP/AUG‐cc‐pVTZ and M06‐2X/AUG‐cc‐pVTZ. Results display: (a) The higher thermodynamic and kinetic stability is revealed by carbenes situated between two nitrogen and/or two oxygen heteroatoms of two substituted rings, in a “W” arrangement toward the carbenic center; (b) Regardless of the arrangement, the order of thermodynamical and kinetic stabilization for fused rings is pyrrole > furan > thiophene > phosphole. (c) The substituted Hammick carbenes with two fused heterocyclics, in a given arrangement, show more stability than unsubstituted Hammick carbene; (d) While two five‐membered heterocyclic rings stabilize their corresponding substituted carbenes, two benzene rings destabilize Hammick carbene; (e) In all structures, s species emerges as ground state, exhibiting more stability than its t state; (f) The scrutinized s carbenes show higher N and lower ω than their corresponding t states.     

Development of Sulfonic-Acid-Functionalized Mesoporous Materials: Synthesis and Catalytic Applications

Sulfonic acid based mesostructures (SAMs) have been developed in recent years and have important catalytic applications. The primary applications of these materials are in various organic synthesis reactions, such as multicomponent reactions, carbon–carbon bond couplings, protection reactions, and Fries and Beckman rearrangements. This review aims to provide an overview of the recent developments in the field of SAMs with a particular emphasis on the reaction scope and advantages of heterogeneous solid acid catalysts.     

A mesoporous silica/fluorinated alcohol adduct: an efficient metal-free,three-component synthesis of indazolophthalazinetrione heterocycles using a reusable nanoporous/trifluoroethanol adduct (SBA-15/TFE)

The channels of mesoporous (SBA-15) represent a straightforward reactor for the rapid synthesis of indazolophthalazinetrione skeletons via three-component coupling reactions in 2,2,2-trifluoroethanol. The solid SBA-15 and TFE could be recovered and reused. The present method carries the advantage of being performed under neutral conditions and requires no activation or modification of the substrates.     

Synthesis and characterization of a Ni nanoparticle stabilized on Ionic liquid‐functionalized magnetic Silica nanoparticles for tandem oxidative reaction of primary alcohols

In this research, preparation of the magnetic nanoparticle, coating by a silica shell using (3‐aminopropyl) triethoxysilane and synthesis of a novel sulfonic acid‐substituted imidazolium‐based ionic liquid onto the surface of these particles via a multi‐component reaction, is described. The functionalized nanoparticles was loaded by Ni nanoparticles and characterized by means of techniques such as XRD, FTIR, SEM, EDX, TEM, TGA and ICP‐OES. The nanostructures have spherical shapes that ranged in size from 80 to 100 nm. The catalytic activity of these nanoparticles was tested in aerobic oxidation of primary alcohols that showed good performance in the wide range of primary alcohols in water at mild reaction conditions. As a second step of this work, the tandem oxidative synthesis of alkylacrylonitriles and bisindolylmethanes were investigated using primary alcohols under oxidation conditions. This catalyst system can be recovered using external magnet and reused for five consecutive cycles without significantly less of its activity.