Hydrogen Peroxide Detection Using Prussian Blue-modified 3D Pyrolytic Carbon Microelectrodes

A highly sensitive amperometric Prussian blue-based hydrogen peroxide sensor was developed using 3D pyrolytic carbon microelectrodes. A 3D printed multielectrode electrochemical cell enabled simultaneous highly reproducible Prussian blue modification on multiple carbon electrodes. The effect of oxygen plasma pre-treatment and deposition time on Prussian blue electrodeposition was studied. The amperometric response of 2D and 3D sensors to the addition of hydrogen peroxide in μM and sub-μM concentrations in phosphate buffer was investigated. A high sensitivity comparable to flow injection systems and a detection limit of 0.16 μM was demonstrated with 3D pyrolytic carbon microelectrodes at stirred batch condition     

Polymer multilayer film formation studied by in situ ellipsometry and electrochemistry

Polyelectrolyte multilayer films adsorbed on gold surfaces were studied by combined ellipsometric and electrochemical methods. Multilayers were composed of “synthetic” (poly(4-styrenesulfonic acid) ammonium salt (PSS) and poly(allylamine hydrochloride) (PAH) (PSS/PAH)) and “semi-natural” (carboxymethyl cellulose (CMC) and chitosan (CHI) (CMC/CHI)) polyelectrolytes. It was found that only PSS/PAH Layer-by-Layer (LbL) assembled structures result in dense surface confined films that limit permeability of small molecules, such as ferri-/ferrocyanide. The PSS/PAH assemblies can be envisaged as films with pinholes, through which small molecules diffuse. During the LbL deposition process of these films a number of pinholes quickly decay. A representative pinhole diameter was found to be approximately 20 μm, which determines the diffusion of small molecules through LbL films, and yet remains constant when the film consists of a few LbL assembled polyelectrolyte bilayers. CMC/CHI LbL assemblies at gold electrode surfaces give very low density films, which do not limit the diffusion of ferri-/ferrocyanide between the surface of the electrode and the solution.     

Electrochemical evidence of self-substrate inhibition as functions regulation for cellobiose dehydrogenase from Phanerochaete chrysosporium

The reaction mechanism of cellobiose dehydrogenase (CDH) from Phanerochaete chrysosporium, adsorbed on graphite electrodes, was investigated by following its catalytic reaction with cellobiose registered in both direct and mediated electron transfer modes between the enzyme and the electrode. A wall-jet flow through amperometric cell housing the CDH-modified graphite electrode was connected to a single line flow injection system. In the present study, it is proven that cellobiose, at concentrations higher than 200 μM, competes for the reduced state of the FAD cofactor and it slows down the transfer of electrons to any 2e⁻/H⁺ acceptors or further to the heme cofactor, via the internal electron transfer pathway. Based on and proven by electrochemical results, a kinetic model of substrate inhibition is proposed and supported by the agreement between simulation of plots and experimental data. The implications of this kinetic model, called pseudo-ping-pong mechanism, on the possible functions CDH are also discussed. The enzyme exhibits catalytic activity also for lactose, but in contrast to cellobiose, this sugar does not inhibit the enzyme. This suggests that even if some other substrates are coincidentally oxidized by CDH, however, they do not trigger all the possible natural functions of the enzyme. In this respect, cellobiose is regarded as the natural substrate of CDH.     

Clustering Effect on the Statistical Estimation Accuracy of Distribution Density

The paper is devoted to statistical nonparametric estimation of multivariate distribution density. The influence of data pre-clustering on the estimation accuracy of multimodal density is analyzed by means of the Monte Carlo method. It is shown that the soft clustering is more advantageous than the hard one. While a moderate increase in the number of clusters also increases the calculation time, it considerably reduces the estimation error.     

Activity of lactoperoxidase when adsorbed on protein layers

Lactoperoxidase (LPO) is an enzyme, which is used as an antimicrobial agent in a number of applications, e.g., food technology. In the majority of applications LPO is added to a homogeneous product phase or immobilised on product surface. In the latter case, however, the measurements of LPO activity are seldom reported. In this paper we have assessed LPO enzymatic activity on bare and protein modified gold surfaces by means of electrochemistry. It was found that LPO rapidly adsorbs to bare gold surfaces resulting in an amount of LPO adsorbed of 2.9mg/m(2). A lower amount of adsorbed LPO is obtained if the gold surface is exposed to bovine serum albumin, bovine or human mucin prior to LPO adsorption. The enzymatic activity of the adsorbed enzyme is in general preserved at the experimental conditions and varies only moderately when comparing bare gold and gold surface pretreated with the selected proteins. The measurement of LPO specific activity, however, indicate that it is about 1.5 times higher if LPO is adsorbed on gold surfaces containing a small amount of preadsorbed mucin in comparison to the LPO directly adsorbed on bare gold.     

Screen-printed multienzyme arrays for use in amperometric batch and flow systems

Screen-printing technology for electrode fabrication enables construction of amperometric devices suitable for combination of several enzyme electrodes. To develop a biosensor array for characterisation of wastewaters, tyrosinase and horseradish peroxidase (HRP) or cholinesterase-modified electrodes were combined on the same array. The behaviour of the tyrosinase-modified electrode in the presence of hydrogen peroxide (required co-substrate for the HRP-modified electrode) and acetylthiocholine chloride (required co-substrate for cholinesterase) was studied. Performance of bi-enzyme biosensor arrays in the batch mode and in the flow-injection system are discussed.     

Effects of pretreatments and modifiers on electrochemical properties of carbon paste electrodes

The electrochemical properties of carbon paste electrodes (CPEs), including unmodified and modified with protein and polycations, were investigated by impedance spectroscopy (IS) using ferricyanide and ferrocene monocarboxylic acid (FcMA) as redox probes. Various electrochemical pretreatments were applied to the unmodified CPE. The heterogeneous charge transfer rate constant of ferro/ferricyanide couple is enhanced by 2 to 10 times compared with that obtained at untreated electrodes. It was found that for ferricyanide the more suitable pretreatments are successive cyclic voltammetric scans, cathodization and a square wave-like stepping rather than high-potential anodization. However, the pretreatment only exhibits a slight effect on the kinetics of FcMA. At the CPEs containing modifier, the electron transfer rate of the redox couple depends more on the pH of electrolyte solution if ferro/ferricyanide is used. The results can be explained by the differently charged states of the CPEs that were caused by the protonation or deprotonation of the modifiers in various pH solutions and demonstrate the importance of the electrostatic interaction on the kinetics of the highly polar species such as ferricyanide. The different adsorptive behavior of ferricyanide and FcMA is also discussed.     

Tuning the redox potential of riboflavin by zirconium phosphate in carbon paste electrodes

Modified carbon paste electrodes were prepared by inclusion of riboflavin together with zirconium phosphate (ZrP) into carbon paste. The midpoint potential for riboflavin in this electrode was found to be -0.259 V vs. SCE and shifted by 0.207 V to the positive direction, as compared to carbon paste electrode not containing ZrP. The electrode prepared was shown to electrocatalyse the anodic oxidation of the coenzyme NADH in the potential range of 0.0 to 0.25 V.     

Direct heterogeneous electron transfer of recombinant horseradish peroxidases on gold

Clean polycrystalline gold electrodes were modified with native glycosylated horseradish peroxidases (HRP) or two different recombinant (carbohydrate free) HRPs; recombinant wild-type HRP (rec-HRP) and recombinant HRP containing a six histidine-tag at the C-terminus of the polypeptide chain (rec-HRP-His), respectively. Only the electrodes modified with the recombinant HRPs exhibited high current responses to H2O2 due to relatively rapid direct electron transfer (ET) between recombinant HRP and gold. The absence of a carbohydrate shell on rec-HRP and the additionally existing histidine-tag on rec-HRP-His improved the electrode sensitivity to H2O2 by more than 100 times if compared with the response observed at gold modified with native HRP. Rotating disk electrode experiments indicated that the heterogeneous electron transfer rates are equal to 4.7 and 7.5 s-1 for direct electron transfer between the gold electrode and rec-HRP or rec-HRP-His, respectively.     

Monitoring of Saccharomyces cerevisiae cell proliferation on thiol-modified planar gold microelectrodes using impedance spectroscopy

An impedance spectroscopic study of the interaction between thiol-modified Au electrodes and Saccharomyces cerevisiae of strain EBY44 revealed that the cells formed an integral part of the interface, modulating the capacitive properties until a complete monolayer was obtained, whereas the charge transfer resistance ( R ct) to the redox process of [Fe(CN)6] 3-/4- showed a linear relationship to the number of cells even beyond the monolayer coverage. R ct showed strong pH dependence upon increasing the pH of the utilized buffer to 7.2. Upon addition of S. cerevisiae cells at pH 7.2, the obtained value of R ct showed over 560% increase with respect to the value obtained on the same thiol-modified electrode without cells. It was demonstrated that real-time monitoring of S. cerevisiae proliferation, with frequency-normalized imaginary admittance (real capacitance) as the indicator, was possible using a miniaturized culture system, ECIS Cultureware, with integrated planar cysteamine-modified Au microelectrodes. A monolayer coverage was reached after 20-28 h of cultivation, observed as an approximately 15% decrease in the real capacitance of the system.