Visible‐Light‐Driven Self‐Coupling of Methylarenes Catalyzed by Ni2P@Cd0.5Zn0.5S Nanoparticles

The Ni₂P@Cd_0.5Zn_0.5S nanoparticles photocatalyzed self‐coupling of p‐xylene was reported here, and the corresponding coupling product 1,2‐di‐p‐tolylethane was obtained. The reaction could be extended to toluene derivatives with electron‐donating and electron‐withdrawing substituents. Ni₂P@Cd_0.5Zn_0.5S nanoparticles had already been characterized by XRD, ICP‐AES, SEM, TEM, UV/Vis, FL, XPS. The Mott–Schottky curves of Ni₂P@Cd_0.5Zn_0.5S were made through electrochemical methods. An active carbon free‐radical was captured through ESR measurement under irradiation. The research demonstrated this photocatalytic system feasible for the self‐coupling reaction of toluene derivatives.     

Radar Absorption Properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy Nanocomposites

A nitrate? citrate gel was prepared from metallic nitrates and citric acid by sol? gel process and was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄ nanocrystalline powder by auto‐combustion. Then, two novel 15 and 35% (w/w) magnetic Ni_0.5Zn_0.5Fe₂O₄ containing polyaniline nanocomposites, named as PANI‐Ni15 and PANI‐Ni35, respectively, were prepared via in‐situ polymerization of aniline in an aqueous solution containing proper amount of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder. The incorporation of the nanopowders to PANI matrix was confirmed by X‐ray diffraction (XRD), IR and SEM. Synthesized PANI‐NiZn ferrite composite particles were subsequently added to an epoxy resin matrix to produce related nanocomposites. The morphological properties of these nanocomposite materials were investigated by SEM and TEM. The electromagnetic‐absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. Results showed the reflection loss of the PANI‐Ni35 composite is higher than pure polyaniline and PANI‐Ni15. The good reflection loss of the nanocomposites suggests their potential applicability as radar absorber.     

Ultrasonic-assisted synthesis of PMMA/Ni0.5Zn0.5Fe2O4 nanocomposite in mixed surfactant system

PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite with superparamagnetic behavior was synthesized by in situ emulsion polymerization of methylmethacrylate (MMA) monomer in the presence of Ni_0.5Zn_0.5Fe₂O₄ colloidal suspension assisted by ultrasonic irradiation. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). XRD and FT-IR spectra confirmed the formation of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite. TEM images showed that Ni_0.5Zn_0.5Fe₂O₄ nanoparticles with the particle sizes of about 12 nm were well dispersed in the polymer matrix. The nanocomposite at room temperature exhibited superparamagnetic behavior under applied magnetic field. The formation mechanism of PMMA/Ni_0.5Zn_0.5Fe₂O₄ nanocomposite was proposed as well.     

Preparation and ferromagnetic properties of Ni0.5Zn0.5Fe2O4/polyaniline core–shell nanocomposites

Magnetic Ni_0.5Zn_0.5Fe₂O₄‐crosslinked polyaniline composites with a core–shell structure were prepared in the presence of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder in a toluene solution containing iron chloride as a surfactant and dopant. Structural characterization by Fourier transform infrared, X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy proved that Ni_0.5Zn_0.5Fe₂O₄ in the composites was responsible for the ferromagnetic behavior of the composites. The effects of the polyaniline and temperature on the magnetic properties of the Ni_0.5Zn_0.5Fe₂O₄/polyaniline composites were studied with electron paramagnetic resonance and superconducting quantum interference device techniques. A clear evolution from ferromagnetic resonance to electron paramagnetic resonance was observed as a function of temperature, which was related to the passage through the Curie point (～420 K). The magnetic properties of the resulting composites showed ferromagnetic behavior, such as high‐saturated magnetization (saturation magnetization = 35–39 emu/g), low coercive force (coercivity = 22–28 G), and low blocking temperatures (～23 K). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2657–2664, 2006     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

Butane‐1‐sulfonic acid immobilized on magnetic Fe3O4@SiO2 nanoparticles: A novel and heterogeneous catalyst for the one‐pot synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives in aqueous media

Butane‐1‐sulfonic acid immobilized on magnetic Fe₃O₄@SiO₂ nanoparticles (Fe₃O₄@SiO₂‐Sultone) was easily prepared via direct ring opening of 1,4‐butanesultone with nanomagnetic Fe₃O₄@SiO₂. The prepared reagent was characterized and used for the efficient promotion of the synthesis of barbituric acid and pyrano[2,3‐d] pyrimidine derivatives. All reactions were performed under mild and completely heterogeneous reaction conditions affording products in good to high yields. The catalyst is easily isolated from the reaction mixture by magnetic decantation and can be reused at least eight times without significant loss in activity.     

Cu(II) immobilized on Fe3O4–diethylenetriamine: A new magnetically recoverable catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and oxidative coupling of thiols

Cu(II) immobilized on Fe₃O₄–diethylenetriamine was designed as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H )‐ones and the oxidative coupling of thiols. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst with unaltered activity make our protocol a green and feasible synthetic strategy.     

Preparation of MnxNi0.5-xZn0.5Fe2O4 Nanorods by the Co-precipitation Method

Mn_xNi_0:5-xZn_0:5Fe₂O₄ nanorods were successfully synthesized by the thermal treatment of rod-like precursors that were fabricated by the co-precipitation of Mn²⁺, Ni²⁺, and Fe²⁺ in the lye. The phase, morphology, and particle diameter were examined by the X-ray diffrac-tion and transmission electron microscopy. The magnetic properties of the samples were stud-ied using a vibrating sample magnetometer. The results indicated that pure Ni_0:5Zn_0:5Fe₂O₄ nanorods with a diameter of 35 nm and an aspect ratio of 15 were prepared. It was found that the diameter of the Mn_xNi_0:5-xZn_0:5Fe₂O₄ (0≤x≤0.5) samples increased, the length and the aspect ratio decreased, with an increase in x value. When x=0.5, the diameter and the aspect ratio of the sample reached up to 50 nm and 7～8, respectively. The coercivity of the samples first increased and then decreased with the increase in the x value. The coer-civity of the samples again increased when the x value was higher than 0.4. When x=0.5,the coercivity of the Mn_xNi_0:5-xZn_0:5Fe₂O₄ sample reached the maximal value (134.3 Oe)at the calcination temperature of 600 oC. The saturation magnetization of the samples first increased and then decreased with the increase in the x value. When x=0.2, the satura-tion magnetization of the sample reached the maximal value (68.5 emu/g) at the calcination temperature of 800 oC.     

Application of a biological‐based nanomagnetic catalyst in the synthesis of bis‐pyrazols and pyrano[3,2‐c]pyrazoles

{Fe₃O₄@SiO₂@(CH₂)₃‐thiourea dioxide‐SO₃H/HCl}, a newly reported nanomagnetic core–shell supported solid acid catalyst, was successfully employed in the preparation of 4,4′‐(arylmethylene)bis(1H –pyrazol‐5‐ol) and pyrano[3,2‐c ]pyrazole derivatives. The presented methods are very efficient and high‐yielding. Also, the catalyst exhibited powerful potential for reusability in both types of reactions.     

Polyethylene Glycol‐(N‐Methylimidazolium) Hydroxide‐Grafted γ‐Fe2O3@HAp: A Novel Nanomagnetic Recyclable Basic Phase‐Transfer Catalyst for the Synthesis of Tetrahydrobenzopyran Derivatives in Aqueous Media

Polyethylene glycol‐(N‐methylimidazolium) hydroxide‐grafted hydroxyapatite encapsulated γ‐Fe₂O₃ nanoparticles, γ‐Fe₂O₃@HAp@PEG(mim)OH, were prepared and characterized by FTIR, SEM, TEM, TGA, and EDAX. This nanocomposite was applied as a novel, green, nanomagnetic, and recyclable basic phase‐transfer catalyst for the synthesis of tetrahydrobenzopyrans in high yields via the three‐component reaction of aromatic aldehydes, malononitrile, and dimedone or 1,3‐cyclohexanedione in aqueous media at ambient temperature.     

A highly coercive carbon nanotube coated with Ni0.5Zn0.5Fe2O4 nanocrystals synthesized by chemical precipitation-hydrothermal process

Novel magnetic composites (Ni_0.5Zn_0.5Fe₂O₄-MWCNTs) of multi-walled carbon nanotubes (MWCNTs) coated with Ni_0.5Zn_0.5Fe₂O₄ nanocrystals were synthesized by chemical precipitation-hydrothermal process. The composites were characterized by X-ray powder diffractometer (XRD), X-ray photoelectron spectrometer (XPS), Fourier transform infrared spectroscopy (FTIR), Mössbauer spectroscopy (MS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED), etc. A temperature of about 200 °C was identified to be an appropriate hydrothermal condition to obtain Ni_0.5Zn_0.5Fe₂O₄-MWCNTs, being lower than the synthesis temperature of a single-phase Ni_0.5Zn_0.5Fe₂O₄ nanocrystals. The sizes of Ni_0.5Zn_0.5Fe₂O₄ in the composites were smaller than those of Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in single phase. The composites exhibited more superparamagnetic than Ni_0.5Zn_0.5Fe₂O₄ nanocrystals in their relaxation behaviors. The magnetic properties measured by a vibrating sample magnetometer showed that the composites had a high coercive field of 386.0 Oe at room temperature, higher than those of MWCNT and Ni_0.5Zn_0.5Fe₂O₄ nanocrystals.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation of Fe3O4@5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol copper complex: A capable nanocatalyst for the green synthesis of 1‐substituted 1H‐tetrazoles

Fe₃O₄ magnetic nanoparticles functionalized with 5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol were synthesized as was their complex with copper as a novel nanomagnetic iron oxide catalyst via a simple and green method, and characterized using various techniques. The capability of the catalyst was evaluated in the one‐pot three‐component synthesis of different tetrazoles, which showed very good results. Mild reaction conditions, good reusability and simple magnetic work‐up make this methodology interesting for the efficient synthesis of tetrazoles.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Preparation of novel palladium nanoparticles supported on magnetic iron oxide and their catalytic application in the synthesis of 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols

Novel Pd nanoparticles were prepared in five successive stages: 1) preparation of the Fe₃O₄ magnetic nanoparticles (Fe₃O₄ MNPs), 2) coating of Fe₃O₄ MNPs with SiO₂ (Fe₃O₄@SiO₂), 3) functionalization of Fe₃O₄@SiO₂ with 3‐chloropropyltrimethoxy‐ silane (CPTMS) ligand (Fe₃O₄@SiO₂@CPTMS), 4) further functionalization with 3,5‐diamino‐1,2,4‐triazole (DAT) ligand (Fe₃O₄@SiO₂@CPTMS @DAT), and 5) the complexation of Fe₃O₄@SiO₂@CPTMS@DAT with PdCl₂ (Fe₃O₄@SiO₂@CPTMS@ DAT@Pd). Then, the obtained Pd nano‐catalyst characterized by different methods such as the elemental analysis (CHN), FT‐IR, XRD, EDX, SEM, TEM, TG‐DTA and VSM. Finally, the Pd catalyst was applied for the synthesis of various 2‐imino‐3‐phenyl‐2,3‐dihydrobenzo[d]oxazol‐5‐ols.     

Preparation and optical properties of TiO2?xNx/Ni0.5Zn0.5Fe2O4 core–shell nanocatalyst from sol–gel-hydrothermal process

A nitrogen doped TiO₂/Ni_0.5Zn_0.5Fe₂O₄ core–shell structure nanoparticles was prepared by low temperature sol–gel-hydrothermal process. The characterizations of the catalyst indicate that the Ni_0.5Zn_0.5Fe₂O₄ nanocrystals of about 25 nm are well-coated with crystalline N-doped titania. The absorption edges in the diffusion reflectance spectra of TiO_0.98N_1.02 and TiO_1.37N_0.63/Ni_0.5Zn_0.5Fe₂O₄ shift to visible light region. The core–shell nanocatalysts can effectively photodegrade organic pollutants in the dispersion system and can be recycled easily by an external magnetic field.     

A Magnetically Separable Catalyst for Synthesis of 1‐Phenoxy‐2‐propanol Via Atom‐economic Reaction

A magnetically separable catalyst Al₂O₃‐MgO/Fe₃O₄ was prepared by Al₂O₃‐MgO supported on magnetic oxide Fe₃O₄ and charactered by FT‐IR, XRD and SEM. The mixed oxides afforded high catalytic activity and selectivity for synthesis of 1‐phenoxy‐2‐propanol from phenol and propylene oxide with 80.3% conversion and 88.1% selectivity to 1‐phenoxy‐2‐propanol. Especially, facile separation of the catalyst by a magnet was obtained and the catalytic performance of the recovered catalyst was unaffected even at the forth run.     

Application of Nanosized Cu0.5Co0.5Fe2O4 Spinel Ferrite as a Nanocatalyst in the Synthesis of 14‐Aryl‐14H‐dibenzo[a,j]xanthene Derivatives under Solvent‐free Conditions

Copper and cobalt substituted spinel ferrites Cu_1‐xCo_xFe₂O₄ (0≤X≤1) have been synthesized by using hydrothermal method. The resultant spinel ferrites were systematically characterized by different techniques such as X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FT‐IR). It was indicated that all the resultant spinel ferrites obtained by the hydrothermal method had the single‐phase crystalline. The resultant spinel ferrites were employed in the synthesis of 14‐aryl‐14‐H‐dibenzo[a,j]xanthene derivatives. It was found that the nanocatalyst Cu_0.5Co_0.5Fe₂O₄ displays the best performance in the synthesis of 14‐aryl‐14H‐dibenzo[a,j]xanthenes. The catalyst was reused several times without significant loss of its activity for the preparation of desired product. In addition high yields of the products, solvent‐free conditions and reusability of the catalyst are other worthwhile advantages of the present study.     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.     

Supramolecular Fe3O4@PEG/−diaza crown ether@Ni: a novel magnetically reusable nano catalyst for the clean synthesis of 2‐aryl‐2,3‐dihydroquinazolin‐4(1H)‐ones

Ni@diaza crown ether complex supported on magnetic nanoparticle was provided by grafting technique. The catalytic activity of Fe₃O₄@diaza crown ether@Ni was explored through one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and it was used as an efficient and recoverably constant nanocatalyst. FT‐IR, SEM, TEM, XRD, BET, ICP, EDS, and TGA techniques were employed to specify the nanocatalyst. This heterogeneous catalyst demonstrated acceptable recyclability and could be used again several times with no considerable loss of its catalytic activity.