Carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

A novel carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC)-based hydrogel with sensitivity to environmental changes, pH and salts was synthesized by using fumaric acid and malic acid at various concentrations. Water uptake capacity of hydrogels was investigated in distilled water, various salt and pH solutions. From pH-dependent studies, it was found that greater water uptake values were observed at greater pH values (7.4), and reversible pH responsiveness of CMC–HEC based hydrogels was obtained. Decreasing the water uptake capacity with increasing of the charge of the metal cation (Al³⁺ < Ca²⁺ < Na⁺) demonstrated metal ion responsiveness of CMC–HEC-based hydrogels. From tensile tests of the hydrogels, a greater crosslinker concentration led to greater tensile strength values. Thermogravimetric analysis and scanning electron microscopy images were used to determine the thermal stability and to observe morphological properties of the samples, respectively.     

The effect of UV-A (352 nm) stress on chlorophyll fluorescence,chlorophyll a content,thickness of upper cortex and determinate DNA damage in Physcia semipinnata

In the present study, Physcia semipinnata samples were exposed to UV-A (352 nm) in 20 J m^?2 for 24 h, 48 h and 72 h to seek the alterations in the PSII photosynthetic quantum yield, thallus anatomy and DNA mutation rate in response to radiation. The Fv/Fm ratio decreased in P. semipinnata following exposure to UV-A for 24 h, 48 h and 72 h. The data of the present study reported that Chla degradation occurred by exposition of UV-A for 24 h, 48 h and 72 h. Photobiont size and thickness of upper cortex layer also showed a gradually decrease in P. semipinnata thallus sections during 24 h, 48 h and 72 h. The thickness of the upper cortex layer, exposed to UV-A for 72 h, of P. semipinnata thallus reduced 64%, compared with control. The random amplified polymorphic DNA (RAPD) technique was used to detect DNA damage. The main changes observed in the RAPD profiles resulted in both appearance and disappearance of different bands and variation of their intensity. According to RAPD assay, the genetic distance between the control group and 24 h, 48 h and 72 h UV-A exposed, groups was found 56%, 78% and 84%, respectively.     

Role of the n+1 amino acid residue on the deamidation of asparagine in pentapeptides

Deamidation plays an important role in biochemical phenomena such as aging. The role of the n + 1 residue on the deamidation of asparagine (asparagine being the nth residue) in three pentapeptide chains (GGNGG, GGNMG and GGNIG) has been analysed with hybrid computational tools. Potentials of mean force at 300 K were calculated from the MD/replica exchange simulations using weighted histogram analysis (WHAM) in explicit water. The snapshots were clustered taking into account the requirements of the plausible deamidation mechanisms, as such the tautomerisation of the asparagine side chain as initial step has been confirmed, based on the proximity of water to the deamidation site. The ultimate goal being to gain an insight on the peptide backbone N-H acidity, quantum mechanical calculations have been carried out. For this purpose, the distribution of Φ/Ψ, Φ₂/Ψ and end-to-end distances deduced from the WHAM diagrams have been considered and a total of 110 structures have been sampled. These neutral pentapeptides as well as their corresponding anions have been optimised (B3LYP/6-31++G(d,p)) in implicit water in order to gain an insight on the peptide backbone N-H acidity. In this study, we have shown that the open conformations of the neutrals and the anions, which display a β sheet like structure are well populated and their pK_as rank in the same order as the deamidating half-lives, that is the peptides that deaminate fastest can more readily access conformations that are more acidic.     

Interaction of Sodium Dodecyl Sulfate with Poly(ethyleneimine) in Bulk Solution and at the Air-Solution Interface

Interaction of sodium dodecyl sulfate (SDS) with the cationic polyelectrolyte poly(ethyleneimine) (PEI) was investigated in this study. Turbidity measurements were performed in order to analyze the interaction and complex formation in bulk solution as a function of polymer concentration and pH. Surface tension measurements were made to investigate the properties of SDS/PEI/water mixtures at air/solution interface. Results revealed that SDS/PEI complexes form in solution depending on the surfactant and polymer concentration. A decrease was observed in surface tension values in the presence of SDS/PEI mixtures compared to the values of pure SDS solutions. Both solution and interfacial properties exhibited pH dependent behavior. A shift was seen in the critical micelle concentration of SDS solutions as a function of PEI concentration and solution pH. Monovalent and divalent salt additions showed some influence on the interfacial properties of SDS solutions in the presence of PEI.     

Effect of Cationic Polyelectrolyte on the Flow Behavior of Hydroxypropyl Methyl Cellulose/Polyacrylic Acid Interpolymer Complexes

Association of polyacrylic acids and nonionic polymers in solutions via hydrogen bonding results in formation of novel polymeric materials. These complexes are novel individual compounds and their properties are entirely different from the properties of their component polymers. In this study, the effects of a cationic polyelectrolyte (polyethylenimine, PEI) on the interpolymer complexation of hydroxypropyl methyl cellulose (HPMC) with polyarcylic acid (PAA) in aqueous media were studied. Results showed that at low pH, interpolymer complex (IPC) formation was observed between HPMC and PAA at a 3:0.5 polymer ratio. Under basic conditions, the viscosity of the IPC increased accompanied with the transition from coiled structure to an extended conformation of associates. Addition of PEI to the same system caused some structural changes in the polymer solution mixtures depending on the pH of the system. PEI worked as a destructive agent for the HPMC/PAA interpolymer complexes and associates. This behavior was attributed to the complex formation between PEI and HPMC via hydrogen bonding.     

Substituent control in the diastereoselectivity of dipolar cycloadditions of nitrones and their Zn(II) complexes with N-arylmaleimides

The π-π stacking interactions between maleimide's and nitrone's aromatic rings during the 1,3-dipolar cycloaddition were assumed to control the exo-endo selectivity of the reaction. The exo-endo ratios change during the reactions until they reach a constant value, which depends on the substituent. Electron-withdrawing groups favour the exo adduct while electron-donating groups favour the endo adduct. The nitrone ZnBr₂ complexes react much more slowly than the free nitrone and the cycloaddition is exo selective in all cases independent of the substituents on the maleimide's aromatic ring. Thermal retrocycloaddition of the cycloadducts produce the corresponding nitrones. The ring opening in the presence of secondary amines did not induce imine formation. endo Adducts were shown for the first time to be the stable paramagnetic compounds.     

Synthesis and new rearrangements of 4-isoxazolin-4,5-dicarboxylic acid derivatives

Acyclic nitrones react with dimethyl acetylenedicarboxylate (DMAD) to give stable isoxazolines, from which the ones that contain electron-donating aromatic rings at the C3 position (R¹) were shown to undergo unprecedented fragmentation at room temperature, giving the R¹-aldehyde and inseparable product mixtures, probably due to the formation of highly reactive species such as iminocarbenes. Attempts to convert the isoxazolines to the corresponding stable azomethine ylides, by refluxing in toluene, again led to the same product mixtures as above (e.g., the room temperature decomposition). Isoxazolines when reacted with methoxide at room temperature afforded highly functionalised diastereomeric mixtures. Also, isoxazolines, when reacted with propylamine, gave the corresponding amides regioselectively, all of which were more stable than the parent isoxazolines.     

Synthesis,characterization, crystal structure,and antimicrobial studies of novel thiourea derivative ligands and their platinum complexes

N,N-Di-R-N′-(4-chlorobenzoyl)thiourea (Di-R: diethyl, di-n-propyl, di-n-butyl and diphenyl) ligands (HL^1–4) and their Pt(II) complexes (cis-[Pt(L^1–4-S,O)₂]) have been synthesized and structurally characterized by elemental analyses, FT-IR and NMR spectroscopy. HL² ligand and cis-[Pt(L⁴-S,O)₂] metal complex have been also characterized by a single-crystal X-ray diffraction study. HL², C₁₄H₁₉ClN₂OS, crystallizes in the monoclinic space group P2₁/n (no. 14), with Z = 4, and unit cell parameters, a = 11.1405(16) Å, b = 9.7015(12) Å, c = 14.790(2) Å, β = 106.547(7)°. The cis-[Pt(L⁴-S,O)₂], C₄₀H₂₈Cl₂N₄O₂PtS₂: triclinic, space group P-1 (no. 2), a = 8.9919(3) Å, b = 14.7159(6) Å, c = 15.7954(6) Å, α = 113.9317(18)°, β = 97.4490(18)°, and γ = 105.0492(16)°. Single crystal analysis of complex, cis-[Pt(L^1–4-S,O)₂], revealed that a square planar coordination geometry is formed around the platinum atom by two sulfur and two oxygen atoms of the related ligands, which are in a cis configuration. In addition, the thiourea derivative ligands and their complexes were evaluated for both their in-vitro antibacterial and antifungal activity. The results have been reported, explained, and compared with fluconazole and ampicillin, used as reference drugs.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Design,Synthesis, and Phenotypic Profiling of Pyrano‐Furo‐Pyridone Pseudo Natural Products

Natural products (NPs) inspire the design and synthesis of novel biologically relevant chemical matter, for instance through biology‐oriented synthesis (BIOS). However, BIOS is limited by the partial coverage of NP‐like chemical space by the guiding NPs. The design and synthesis of “pseudo NPs” overcomes these limitations by combining NP‐inspired strategies with fragment‐based compound design through de novo combination of NP‐derived fragments to unprecedented compound classes not accessible through biosynthesis. We describe the development and biological evaluation of pyrano‐furo‐pyridone (PFP) pseudo NPs, which combine pyridone‐ and dihydropyran NP fragments in three isomeric arrangements. Cheminformatic analysis indicates that the PFPs reside in an area of NP‐like chemical space not covered by existing NPs but rather by drugs and related compounds. Phenotypic profiling in a target‐agnostic “cell painting” assay revealed that PFPs induce formation of reactive oxygen species and are structurally novel inhibitors of mitochondrial complex I.