Evaluation of the Fate of Aldicarb and Its Metabolites in Oranges

Abstract

The accumulation, persistence and fate of systemic pesticide aldicarb was melencholy evaluated in orange crops. The concentration of this pesticide and its two toxic metabolites, aldicarb sulfoxide and aldicarb sulfone was determined in leaves, rind and pulp of three orange varieties (Satsuma, Navelina and Clemetina de Nules) and in the top soil of the orange groves. The groves were located in two different places in the Valencia Community (Spain). The analysis showed that the aldicarb concentration was lower than those of aldicarb sulfoxide and aldicarb sulfone. In all cases, the residues persisted at least 160 days in vegetable samples and between 157 and 227 days in soil samples. Residue concentrations measured in the soil samples were highly variable but a relation with the organic matter content can be observed. The residue levels found in vegetal products were higher in leaves than in rind, and in rind than in pulp. The maximum residue values were obtained between 47 and 70 days after the application. One hundred days after treatment (Security period) the residue levels of total fruit were lower than the maximum residue level of 0.2 mg/kg established by law.     

Molecular Recognition of Nucleotides in Water by Scorpiand‐Type Receptors Based on Nucleobase Discrimination

The detection of nucleotides is of crucial importance because they are the basic building blocks of nucleic acids. Scorpiand‐based polyamine receptors functionalized with pyridine or anthracene units are able to form stable complexes with nucleotides in water, based on coulombic, π–π stacking, and hydrogen‐bonding interactions. This behavior has been rationalized by means of an exploration with NMR spectroscopy and DFT calculations. Binding constants were determined by potentiometry. Fluorescence spectroscopy studies have revealed the potential of these receptors as sensors to effectively and selectively distinguish guanosine‐5′‐triphosphate (GTP) from adenosine‐5′‐triphosphate (ATP).     

C-terminal processing of yeast Spt7 occurs in the absence of functional SAGA complex

Background  

Spt7 is an integral component of the multi-subunit SAGA complex that is required for the expression of ~10% of yeast genes. Two forms of Spt7 have been identified, the second of which is truncated at its C-terminus and found in the SAGA-like (SLIK) complex.     

Dramatic selectivity differences in the association of DNA and RNA models with new ethylene- and propylene diamine derivatives and their copper complexes

The affinities of polyamines consisting of ethylenediamine units equipped with either one or two terminal naphthyl-, anthryl-, or acridyl units towards PolyA.PolyU as an RNA model, and Poly(dA).Poly(dT) as a DNA model are screened by measuring the melting point changes (DeltaT(m)) of the double strands, and also partially by a fluorimetric binding assay using ethidium bromide. The larger aromatic moieties with long spacers between them allow bisintercalation; this leads to an increased preference for DNA in comparison to RNA, where ion pairing of the ammonium centers with the major RNA groove phosphates dominates. Allosteric affinity control by metalation is achieved e.g. with Cu(2+) ions, which induce conformational distortions within the chains. With anthryl- in contrast to naphthyl derivatives intercalation can be so strong that distortion of the ethylenediamine chain by metalation is not powerful enough. A particularly high concentration of positive charges is accessible with tripodal derivatives built up from ethylenediamine and propylenediamine units; in the absence of aryl parts, which interfere with the RNA groove preference, one observes the highest affinity difference known until today, reflected in a melting point ratio of DeltaT(m(RNA))/DeltaT(m(DNA)) = 40, whereas other synthetic ligands reach only a DeltaT(m(RNA))/DeltaT(m(DNA)) ratio of about 3.     

Diazatetraester 1H-pyrazole crowns as fluorescent chemosensors for AMPH, METH, MDMA (ecstasy), and dopamine

The synthesis and steady-state fluorescence studies on the interaction with AMPH, METH, MDMA, and DA of two diazatetraester pyrazole crowns containing appended N-(9H-fluoren-9-yl) and N-(naphth-2-ylmethyl) functions, in a water/ethanol 70:30 mixture at physiological pH, are described.     

Spectroscopy and coordination chemistry of a new bisnaphthalene-bisphenanthroline ligand displaying a sensing ability for metal cations

A new fluorescent macrocyclic structure (L1) bearing two naphthalene units at both ends of a cyclic polyaminic chain containing two phenanthroline units was investigated with potentiometric and fluorescence (steady-state and time-resolved) techniques. The fluorescence emission spectra show the simultaneous presence of three bands: a short wavelength emission band (naphthalene monomer), a middle emission band (phenanthroline emission), and a long-wavelength band. All three bands were found to be dependent on the protonation state of the macrocyclic unit (including the polyaminic and phenanthroline structures). The existence of the long-wavelength emission band is discussed and is shown to imply that a bending movement involving the two phenanthroline units leads to excimer formation. This is determined by comparison with the excimer emission formed by intermolecular association of 1,10-phenanthroline. With ligand L1, excimer formation occurs only at pH values above 4. At very acidic pH values, the protonation of the polyamine bridges is extensive leading to a rigidity of the system that precludes the bending movement. The interaction with metal cations Zn(II) and Cu(II) was also investigated. Excimer formation is, in these situations, increased with Zn(II) and decreased with Cu(II). The long-emission band is shown to present a different wavelength maximum, depending on the metal, which can be considered as a characteristic to validate the use of ligand L1 as a sensor for a given metal.     

A rapid and sensitive method for the quantification of ganciclovir in plasma using liquid chromatography/selected reaction monitoring/mass spectrometry

A method using reversed-phase liquid chromatography coupled with electrospray ionization and selected reaction monitoring mass spectrometry has been developed for the quantitative analysis of ganciclovir in rat plasma. Acyclovir, a structurally related analog of ganciclovir, was used as the internal standard. A small volume of plasma (50 microL) was spiked with the internal standard and plasma proteins were precipitated by methanol. The supernatant was dried under nitrogen, and then reconstituted in water. The use of liquid chromatography/selected reaction monitoring/mass spectrometry effectively eliminated potential interference from endogenous constituents in the plasma. This highly selective and sensitive method made it possible to analyze plasma ganciclovir with a lower limit of quantitation of 10 ng/mL. The assay was reproducible and linear in the range 10-10,000 ng/mL. The precision and accuracy values were in the range 2.0-6.9% and 89.0-109.6%, respectively. The analyte recovery was greater than 88%. This method was successfully used to monitor the pharmacokinetic profile of ganciclovir in normal rats following intraperitoneal administration of the drug.     

Fluorescent Type II Materials from Naphthylmethyl Polyamine Precursors

Speciation studies in aqueous solution on the interaction of Cu²⁺ and Zn²⁺ with a series of polyaminic ligands N-naphthalen-1-ylmethyl-N′-{2-[(naphthalen-1-ylmethyl)-amino]-ethyl}-ethane-1,2-diamine (Ll), N-naphthalen-1-ylmethyl-N′-(2-{2-[(naphthalen-1-ylmethyl)-amino]-ethylamino}-ethyl)-ethane-1,2-diamine (L2) and N-naphthalen-1-ylmethyl-N′-[2-(2-{2-[(naphthalen-1-ylmethyl)-amino]-ethylamino}-ethylamino)-ethyl]-ethane-1,2-diamine (L3) containing two naphthylmethyl groups at their termini and N ¹-(2-{2-[(naphthalen-1-ylmethyl)-amino]-ethylamino}-ethyl)-ethane-1,2-diamine (L4) containing just one naphthylmethyl group have been carried out at 298.1 K in 0.15 mol dm^?3 NaCl. In the case of the tetraamines L2 and L4, their coordination capabilities towards Cd²⁺, Ni²⁺, Co²⁺ and Pb²⁺ have also been considered. The stability constants follow the general Irving-Williams sequence. The steady-state fluorescence emission studies on the interaction with metal ions show that while Cu²⁺ produces a chelation enhancement of the quenching (CHEQ), the interaction with Zn²⁺ leads to a chelation enhancement of the fluorescence (CHEF). Finally, ligands L1, L2 and L3 have been successfully covalently attached to silica surfaces and some preliminary results of their emissive properties are given.     

Lanthanide complexes as imaging agents anchored on nano-sized particles of boehmite

The synthesis of boehmite nanoparticles modified with lanthanides (Eu, Tb and Gd) is described. Their synthesis, characterization and in vitro assays with HeLa cells were performed. The nuclear magnetic relaxation dispersion (NMRD) profiles of the two chelating moieties were studied. Imaging data from laser scanning confocal fluorescence microscopy and flow cytometry revealed that the nanoscaffolds were taken up by the cells, distributed throughout the cytoplasm and showed no toxicity. This platform could represent an alternative to silica-based inert matrices as imaging vehicles.     

Supramolecular complexation for environmental control

Supramolecular complexes offer a new and efficient way for the monitoring and removal of many substances emanating from technical processes, fertilization, plant and animal protection, or e.g. chemotherapy. Such pollutants range from toxic or radioactive metal ions and anions to chemical side products, herbicides, pesticides to drugs including steroids, and include degradation products from natural sources. The applications involve usually fast and reversible complex formation, due to prevailing non-covalent interactions. This is of importance for sensing as well as for separation techniques, where the often expensive host compounds can then be reused almost indefinitely. Immobilization of host compounds, e.g. on exchange resins or on membranes, and their implementation in smart new materials hold particular promise. The review illustrates how the design of suitable host compounds in combination with modern sensing and separation methods can contribute to solve some of the biggest problems facing chemistry, which arise from the everyday increasing pollution of the environment.