The WCl6-e-Al-CH2Cl2 catalyzed polypentenamer formation via ring-opening metathesis polymerization (ROMP)

The synthesis of polypentenamer by an electrochemically generated metathesis polymerization catalyst from methylene chloride solution of WCl₆ was investigated. The active species formed by electroreduction of this salt under controlled potential of +900 mV at a platinum cathode with an aluminum anode were found to catalyze the ring-opening metathesis polymerization (ROMP) of cyclopentene, monocyclic olefin of relatively low strain, in high yield (89%) and at short period (32 min) under mild conditions. The effect of reaction parameters, e.g., olefin/catalyst ratio, reaction time, electrolysis time, catalyst aging, on the polymerization yield have been studied. The resulting polymer has been characterized by ¹H and ¹³C NMR, IR and gel permeation chromatography (GPC) techniques. Analysis of the polypentenamer microstructure by means of ¹³C NMR spectroscopy indicates that the polymer contains a mainly trans stereoconfiguration of the double bonds (σ_c = 0.31) and a slightly blocky distribution (r_tr_c > 1) of cis and trans double bond dyads (r_tr_c = 1.44). However, this electrochemical system is reluctant to facilitate the competing vinyl type addition polymerization reactions.     

Charge carrier mobility,photovoltaic, and electroluminescent properties of anthracene‐based conjugated polymers bearing randomly distributed side chains

This article reports on the synthesis, characterization, and properties of various anthracene‐containing poly (p‐phenylene‐ethynylene)‐alt‐poly(p‐phenylene‐vinylene) (PPE‐PPV) polymers (AnE‐PVs) bearing statistical distributions of various side chains. Primarily, the ratio of linear octyloxy and branched 2‐ethylhexyloxy side chains at the poly(p‐phenylene vinylene) (PPV) parts was varied, leading to the polymers stat, stat1, and stat2. Furthermore, polymers also containing asymmetric substituted PPV and poly(p‐phenylene ethynylene) units (bearing methoxy and 2‐ethylhexyloxy side chains) were prepared yielding stat3, stat4, and stat5. These materials exhibit a broad variation in their photovoltaic properties. It is once more shown that side chains and their distribution can crucially affect the photovoltaic device performance. The introduction of units with asymmetric substitution into these systems seems to be harmful for their utilization in photovoltaic applications. Organic field‐effect transistors were fabricated to investigate hole mobilities in these new materials. Large variance was observed, falling in the range of almost two orders of magnitude, indicating rather different π–π stacking behavior of the polymer backbones owing to side‐chain modifications. Moreover, a selection of the new polymeric systems was investigated regarding their potential for light‐emitting diode (LED) applications. Polymer LEDs using the polymers AnE‐PVstat, ‐stat3, ‐stat4, and ‐stat5, as the active layer showed turn‐on voltage of ～2 V and exhibited red light emission. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Pharmacological properties of dicyanidoaurate(I)-based complexes: characterization and single crystal X-ray analysis

The synthesis of three bimetallic cyanido complexes with edbea [2,2′-(ethylenedioxy)bis(ethylamine)] ligand is reported. [Ni^II(μ-edbea)₂{Au(μ-CN)₂}₂]_n (1), [{Cu^II(edbea)}₂{Au(μ-CN)₂}₄]_n (2) and [Cd^II(edbea)₂][Au(CN)₂]₂·H₂O (3) were fully characterized by elemental, infrared, XRD (3), ESI-MS and thermal analysis. The DNA/BSA binding properties of these complexes were evaluated by spectrophotometric titration, fluorometric ethidium bromide kinetics, and DNA electrophoresis studies and their partially minor groove binding mode between the base pairs of DNA and electrostatic interaction between the amino acid residues of BSA were explained. The complexes were tested for their pharmacological properties. These molecules had excellent in vitro antiproliferative activity and also exhibited a strong tumor inhibiting effect against HT29, HeLa, C6 and Vero cell lines. These complexes had metastatic features as they are able to reduce cell migration activity and suppress tumor growth in vitro. Analysis of the DNA topoisomerase I relaxing activity indicates that the complexes do not inhibit topoisomerase I which regulates the topological states of the DNA double helix during DNA processing reactions. The TUNEL and DNA laddering assay results indicated that these compounds may destroy cell maintenance by triggering apoptosis. Immunohistochemistry staining analysis demonstrated that these complexes significantly decreased the expression of Bcl-2 in HeLa and HT29 cells while increasing the expression of P53 levels. Overall, the potent antiproliferative activity, low cytotoxic effect, good solubility, and micro molar range dosage observed for these complexes emphasizes their potential as anticancer drug candidates.     

89Zr Labeled Fe3O4@TiO2 Nanoparticles: In Vitro Afffinities with Breast and Prostate Cancer Cells

In this study, Fe₃O₄@TiO₂ nanoparticles were synthesized as a new Positron Emission Tomography/Magnetic Resonance Imaging (PET/MRI) hybrid imaging agent and radiolabeled with ⁸⁹Zr. In addition, Fe₃O₄ nanoparticles were synthesized and radiolabeled with ⁸⁹Zr. Df-Bz-NCS was used as bifunctional ligand. The nanoconjugates were characterized with transmission electron microscopy, scanning electron microscopy, and dynamic light scattering. Radiolabeling yields were 100%. Breast and prostate cancer cell affinities and cytotoxicity were determined using in vitro cell culture assays. The results demonstrated that Fe₃O₄@TiO₂ nanoparticles are promising for PET/MR imaging. Finally, unlike Fe₃O₄ nanoparticles, Fe₃O₄@TiO₂ nanoparticles showed a fluorescence spectrum at an excitation wavelength of 250 nm and an emission wavelength of 314 nm. Therefore, in addition to bearing the magnetic properties of Fe₃O₄ nanoparticles, Fe₃O₄@TiO₂ nanoparticles display fluorescence emission. This provides them with photodynamic therapy potential. Therefore multimodal treatment was performed with the combination of PDT and RT by using human prostate cancer cell line (PC3). The development of ⁸⁹Zr-Df-Bz-NCS-Fe₃O₄@TiO₂ nanoparticles as a new multifunctional PET/MRI agent with photodynamic therapy and hyperthermia therapeutic ability would be very useful.     

Synthesis,characterization and biodistribution of 99mTc-Bioquin-HMPAO (99mTc-BH) as a novel brain imaging agent

Recently, the development of novel brain imaging agents has aroused much interest thanks to limited number of brain cancer or diseases diagnosis agents. It is aimed to synthesize a novel brain imaging agent including a promise for further studies on AD diagnosis potential and investigate its bioaffinity with biodistribution studies on healthy Balb/c mice. A novel radiolabeled agent was synthesized and characterized. Quality control of ^99mTc-BH was performed utilizing solvent extraction and chromatographic (Radio TLC and Radio HPLC) methods. Bioaffinity of the ^99mTc-BH was investigated on male Balb/c mice at various time points (5, 30, 60, 120 min post-injection). Paper electrophoresis showed that ^99mTc-BH has a neutral structure. Radiochemical purity of ^99mTc-BH was over 95 % with appropriate stability for imaging period. Selected brain regions have uptakes over 4 % ID/g following intravenous injection. Hippocampus has uptake approximately 10 % ID/g. ^99mTc-BH has shown brain uptake, so it may prove to be valuable for brain imaging as a novel technetium-labeled agent. Further investigations with AD animal model are our on going effort to show that this agent has AD diagnosis potential.     

Preparation of a 99mTc-labeled graft polymer and its in vitro and in vivo evaluation

Journal of Radioanalytical and Nuclear Chemistry - The aim of this study is the synthesis of a novel 99mTc-labeld graft polymer and the biological evaluation of its in vitro and in vivo properties....     

A Comparison of the LVDP and ΛCDM Cosmological Models

We compare the cosmological kinematics obtained via our law of linearly varying deceleration parameter (LVDP) with the kinematics obtained in the ΛCDM model. We show that the LVDP model is almost indistinguishable from the ΛCDM model up to the near future of our universe as far as the current observations are concerned, though their predictions differ tremendously into the far future.     

Cytotoxic and apoptotic activities of novel Pd(II) complexes against human leukemia cell lines in vitro

In the investigation for alternative chemotherapeutic strategies against leukemia, Pd(II) complexes were synthesized and investigated for cytotoxic and apoptotic properties on two human leukemia cell lines (HL-60 and K562). Pd(II) complexes (Pd-5a and Pd-6a) with 5a and 6a as ligands were synthesized and characterized by ¹H-NMR and F-TIR. The cytotoxicity of the compounds was quantified using MTT method. Bax, Bcl-2, and caspase 3 gene expression levels were estimated using RT-qPCR. Here we show that Pd(II) complexes have important cytotoxic activity on human leukemia cell lines. RT-qPCR indicated that Bax and caspase 3 gene expression levels were increased after 24 h treatment with Pd-5a and Pd-6a complexes in both HL-60 and K562 cells at some selected dose. Furthermore, Bcl-2 gene expression level decreased after 24 h treatment with Pd-5a and Pd-6a complexes in K562 cells at all selected dose. In HL-60 cells, only one selected Pd-5a dose (25 µM) decreased the gene expression level of Bcl-2. The results obtained in the present investigation indicate that these two newly synthesized Pd(II) complexes have apoptotic effects at appropriate doses through caspase 3 and Bax genes and might represent a novel potentially active agents for the management of human leukemia cell lines.     

Responsive microgrooves for the formation of harvestable tissue constructs

Given its biocompatibility, elasticity, and gas permeability, poly(dimethylsiloxane) (PDMS) is widely used to fabricate microgrooves and microfluidic devices for three-dimensional (3D) cell culture studies. However, conformal coating of complex PDMS devices prepared by standard microfabrication techniques with desired chemical functionality is challenging. This study describes the conformal coating of PDMS microgrooves with poly(N-isopropylacrylamide) (PNIPAAm) by using initiated chemical vapor deposition (iCVD). These microgrooves guided the formation of tissue constructs from NIH-3T3 fibroblasts that could be retrieved by the temperature-dependent swelling property and hydrophilicity change of the PNIPAAm. The thickness of swollen PNIPAAm films at 24 °C was approximately 3 times greater than at 37 °C. Furthermore, PNIPAAm-coated microgroove surfaces exhibit increased hydrophilicity at 24 °C (contact angle θ = 30° ± 2) compared to 37 °C (θ = 50° ± 1). Thus PNIPAAm film on the microgrooves exhibits responsive swelling with higher hydrophilicity at room temperature, which could be used to retrieve tissue constructs. The resulting tissue constructs were the same size as the grooves and could be used as modules in tissue fabrication. Given its ability to form and retrieve cell aggregates and its integration with standard microfabrication, PNIPAAm-coated PDMS templates may become useful for 3D cell culture applications in tissue engineering and drug discovery.