对氯苯甲酸构筑的铜(Ⅱ)配合物的合成、HSA结合及细胞毒性

本文合成了配合物[Cu(pcba)₂·(phen)(H₂O)] (pcba =对氯苯甲酸,phen = 1,10-邻菲罗啉),该配合物属于三斜晶系,P1空间群,晶胞参数为a=0.790 98(2) nm,b=1.072 40(4) nm,c=1.487 19(6) nm,α=100.613(3)°,β=95.239(3)°,γ=108.334(3)°,Z=2,D_c=1.638 g·cm^-3,F(000)=582,最终结构残差因子R₁=0.035 9,wR₂=0.089 1。采用紫外及荧光研究了配合物和人血清蛋白(HSA)的相互作用方式。结果表明,配合物静态猝灭HSA荧光,可求得配合物与HSA的猝灭常数K_sv=2.35×10⁵ L·mol^-1,猝灭速率常数K_q=2.35×10¹³ L·mol^-1·s^-1,结合常数为K_a=2.14×10¹³ L·mol^-1,结合位点n=2.37。同时,研究了配合物对胃癌细胞A549、宫颈癌细胞Hela和肝癌细胞HepG2的抗增殖能力。     

Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

三维层状双金属氢氧化物(3D-LDHs)的制备及应用概述

三维层状双金属氢氧化物简称3D-LDHs,是在制备普通二维层状金属氢氧化物(2D-LDHs)的过程中,改变反应条件得到的三维结构产物.它的组成单元与二维产物相同为完整LDHs纳米片,基本保留了LDHs具有的碱性、阴离子可交换性和记忆效应等特点,同时又因三维结构获得了更大的比表面积、丰富的孔隙结构以及形成复合材料的能力,在吸附、催化和电化学等方面的应用性能得以增强.本文概述了3D-LDHs的组成结构、主要制备方法及产物形貌,并对未来的研究方向进行了展望.     

A Shell-by-Shell Approach for Synthesis of Mesoporous Multi-Shelled Hollow MOFs for Catalytic Applications

Over the past two decades, advanced materials with hollow interiors have received significant attention in materials research owing to their great application potential across a vast number of technological fields. Though with great difficulty, multi-shelled hollow metal–organic frameworks (MSHMs) have also been successfully synthesized in recent years. Herein, a rational shell-by-shell soft-templating protocol has been devised to fabricate highly uniform multi-shelled hollow cobalt-imidazole-based MOF (ZIF-67). For the first time, it has become possible to endow mesoporosity to this new type of functional material (i.e., mesoporous MOFs). When used as carrier materials in catalytic reactions, in principle, these mesoporous MSHMs with high surface area not only improve the dispersity of metal nanoparticles (NPs), but also efficiently facilitate the mass diffusion of the reactions, resulting in enhanced catalyst activity. Moreover, the obtained MSHMs/M nanocomposites serve as base-metal bifunctional catalysts for one-pot oxidation-Knoevenagel condensation cascade reaction, in which the MSHMs itself serves as a pristine active catalyst in addition to its role of catalyst support. The results demonstrate that excellent multifunctional catalysts can be achieved via preparing intrinsically microporous bulk MOFs into extrinsically mesoporous MSHMs which possess many structural merits that conventional bulk MOFs do not have.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

Planar AIEgens with Enhanced Solid-State Luminescence and ROS Generation for Multidrug-Resistant Bacteria Treatment

Planar luminogens have encountered difficulties in overcoming intrinsic aggregation-caused emission quenching by intermolecular π-π stacking interactions. Although excited-state double-bond reorganization (ESDBR) can guide us on designing planar aggregation-induced emission (AIE) luminogens (AIEgens), its mechanism has yet been elucidated. Major challenges in the field include methods to efficiently restrict ESDBR and enhance AIE performance without using bulky substituents (e.g., tetraphenylethylene and triphenylamine). In this study, we rationally developed fluoro-substituent AIEgens with stronger intermolecular H-bonding interaction for restricted molecular motions and increased crystal density, leading to decreased nonradiative decay rate by one order of magnitude. The adjusted ESDBR properties also show a corresponding response to variation in viscosity. Furthermore, their aggregation-induced reactive oxygen species (ROS) generations have been discovered. The application of such planar AIEgen in treating multidrug-resistant bacteria has been demonstrated in a mouse model. The relationship between ROS generation and distinct E/Z-configurational stacking behaviors have been further understood, providing a design principle for synthesizing planar AIEgen-based photosensitizers.     

锡苯和铅苯二聚反应的理论研究

采用密度泛函理论B3LYP方法,研究了锡苯和铅苯的[2+2],[4+2]及[4+4]二聚反应的微观机理和势能剖面,考察了Sn(Pb)原子上的2,4,6-三甲基苯基(Mes)取代基对反应势能剖面的影响.研究结果表明,所有反应均为协同过程,且大多数情况下,2个C—Sn(Pb)键同步形成.[2+2]和[4+2]反应在热力学和动力学上均比相应的[4+4]反应容易进行,而[4+2]反应在动力学上比相应的[2+2]反应有利.Sn(Pb)原子上的Mes取代基在热力学和动力学上均不利于反应的进行.铅苯的动力学稳定性与锡苯相当,但其热力学稳定性高于锡苯.     

CPL冷凝单管融化过程的双倒易边界元分析

1引言CPL（毛细泵两相流回路）能传输较高的热负荷，而且不需要循环泵、阀门等运动部件，重量轻可靠性好；在飞行器热控制方面有很好的应用前景[1]。CPL在恶劣的空间环境中运行，需要防止工作介质出现冷冻，为此，我们已经用解析[2]和数值的方法[3]进行了初步的分析，得到了一些可供工程设计参考应用的结果。另外，在恶劣的空间环境中，如果出现冻结，需要融化起动，热管的安全设计需要研究它的融化特性，以确保热管在空间能正常运行。双倒易边界元方法用Laplace基本解[4]，通过对一类偏微分方程两侧进行转化，将它全部转化为纯边界积分…     

Comparative studies on the mechanism of uridine phosphorolysis

We have used quantum mechanical method to study the transition states(TSs) of uridine phosphorolysis reaction. Comparing the four different reaction pathways and the five transition states obtained, we conclude that enzymatic uridine phosphorolysis takes place mainly according to acid-catalyzed SN2 mechanism. The proposed reaction pathway is consistent with many experimental results.