Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.     

Functional Nickel Oxide Nanostructures for Ethanol Oxidation in Alkaline Media

Nickel oxide (NiO) nanostructures are employed in the basic medium for the oxidation of ethanol. A variety of NiO nanostructures are synthesized by wet chemical growth method, using different hydroxide (OH^?) ion sources, particularly from ammonia, hexamethylenetetramine, urea and sodium hydroxide. The use of urea as (OH^?) ion source results in flower‐like NiO structures composed by extremely thin nanowalls (thickness lower than 10 nm,), which demonstrated to be the most active for ethanol oxidation. All the samples exhibit NiO cubic phase, and no other impurity was detected. The cyclic voltammetry (CV) curves of NiO nanostructures were found linear over the concentration range 0.1–3.5 mM (R²=0.99) of ethanol, with the limit of detection estimated to be 0.013 mM for ethanol. The NiO nanostructures exhibit a selective signal towards ethanol oxidation in the presence of different members of alcohol family. The proposed NiO nanostructures showed a significant practicality for the reproducible and sensitive determination of ethanol from brandy, whisky, mixture of brandy and rum, and vodka samples. The nanomaterial was used as a surface modifying agent for the glassy carbon electrode and it showed a stable electro‐oxidation activity for the ethanol for 16 days. These findings indicate that the presented NiO nanomaterial can be applied in place of noble metals for ethanol sensing and other environmental applications (like fuel cells).     

Glutaric Acid Assisted Fabrication of CuO Nanostructures and their Application in Development of Highly Sensitive Electrochemical Sensor System for Carbamates

This work describes the fabrication of unique arrow head shaped CuO nanostructures using simple hydrothermal treatment method. The highly attractive features were obtained by the application of glutaric acid utilised simultaneous as template and functionalising agent. The functionalised nanostructures were known to possess excellent potential towards the electro‐catalytic oxidation of carbofuran pesticide. The generated intense electrochemical signal with lower potential value enabled sensitive and selective determination of carbofuran up to 1×10^?3 µM with wide sensing window in range of 0.01 to 0.16 µM. The feasibility of the developed sensor system for the practical application was also studied by testing its potential in real sample extracts of various vegetables. The excellent recoveries demonstrated the analytical robustness of the developed sensor system. The sensor system utilises a new and simple approach towards sensitive determination of toxic pesticides reflecting its wide spectrum application in various fields.     

Synthesis of silica nanoparticles doped with [Ru(bpy)3]2+ and decorated with silver nanoclusters for the ratiometric photoluminescent determination and intracellular imaging of Cu(II) ions

Microchimica Acta - A sensitive and selective luminescent nanoprobe (referred to as DEPN) is designed for the determination of Cu(II) ions. DEPN shows two emission peaks, one at 602 nm and...     

Highly sensitive determination of atropine using cobalt oxide nanostructures: Influence of functional groups on the signal sensitivity

This study describes sensitive determination of atropine using glassy carbon electrodes (GCE) modified with Co₃O₄ nanostructures. The as-synthesised nanostructures were grown using cysteine (CYS), glutathione (GSH) and histidine (HYS) as effective templates under hydrothermal action. The obtained morphologies revealed interesting structural features, including both cavity-based and flower-shaped structures. The as-synthesised morphologies were noted to actively participate in electro-catalysis of atropine (AT) drug where GSH-assisted structures exhibited the best signal response in terms of current density and over-potential value. The study also discusses the influence of functional groups on the signal sensitivity of atropine electro-oxidation. The functionalisation was carried with the amino acids originally used as effective templates for the growth of Co₃O₄ nanostructures. The highest increment was obtained when GSH was used as the surface functionalising agent. The GSH-functionalised Co₃O₄-modified electrode was utilised for the electro-chemical sensing of AT in a concentration range of 0.01–0.46 μM. The developed sensor exhibited excellent working linearity (R² = 0.999) and signal sensitivity up to 0.001 μM of AT. The noted high sensitivity of the sensor is associated with the synergy of superb surface architectures and favourable interaction facilitating the electron transfer kinetics for the electro-catalytic oxidation of AT. Significantly, the developed sensor demonstrated excellent working capability when used for AT detection in human urine samples with strong anti-interference potential against common co-existing species, such as glucose, fructose, cysteine, uric acid, dopamine and ascorbic acid.     

Effect of Urea on the Morphology of Co3O4 Nanostructures and Their Application for Potentiometric Glucose Biosensor

In this study, an effect of different concentrations of urea on the morphology of cobalt oxide (Co₃O₄) nanostructures was investigated. The Co₃O₄ nanostructures are fabricated on gold coated glass substrate by the hydrothermal method. The morphological and structural characterization was performed by scanning electron microscopy, and X‐ray diffraction techniques. The Co₃O₄ nanostructures exhibit morphology of flowers‐like and have comprised on nanowires due to the increasing amount of urea. The nanostructures were highly dense on the substrate and possess a good crystalline quality. The Co₃O₄ nanostructures were successfully used for the development of a sensitive glucose biosensor. The presented glucose biosensor detected a wide range of glucose concentrations from 1×10^?6 M to 1×10^?2 M with sensitivity of a ?56.85 mV/decade and indicated a fast response time of less than 10 s. This performance could be attributed to the heterogeneous catalysis effect at glucose oxidase enzyme, nanoflowers, and nanowires interfaces, which have enhanced the electron transfer process on the electrode surface. Moreover, the reproducibility, repeatability, stability and selectivity were also investigated. All the obtained results indicate the potential use of the developed glucose sensor for monitoring of glucose concentrations at drugs, human serum and food industry related samples.     

Synthesis of Sheet Like Nanostructures of NiO Using Potassium Dichromate as Surface Modifying Agent for the Sensitive and Selective Determination of Amlodipine Besylate (ADB) Drug

The monitoring of hypertension drugs is very critical and important to sustain a healthy life. In this study, we have synthesized nickel oxide (NiO) nanostructures using potassium dichromate as surface modifying agent by hydrothermal method. These NiO nanostructures were found highly active for the oxidation of ADB besylate (ADB). The unit cell structure and morphology were investigated by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD) techniques. The SEM study has confirmed the nano sheet like morphology and XRD analysis has described the cubic unit arrays of NiO. After the physical characterization, NiO nanostructures were used to modify the surface of glassy carbon electrode (GCE) by drop casting method. Then cyclic voltammetry (CV) was used to characterize the electrochemical activity of NiO nanostructures in the0.1 M phosphate buffer solution of pH 10.0 and a well resolved oxidation peak was identified at 0.70 V. The linear range for the NiO nanostructures was observed from 20–90 nM with a regression coefficient of 0.99 using CV. The calculated limit of detection (LOD) was 2.125 nM and the limit of quantification (LOQ) was 4.08 nM. Further to validate the CV calibration plot, an amperometry experiment was performed on the NiO nanostructures and sensors exhibited a linear range of 10 nM to 115 nM with LOD of 1.15 nM. The proposed approach was successfully used for the determination of ADB from commercial tablets and it reveals that the sensor could be capitalized to monitor ADB concentrations from pharmaceutical products. The use of potassium dichromate as a surface modifying agent for the metal oxide nanostructures may be of great interest to manipulate their crystal and surface properties for the extended range of biomedical and energy related applications.     

Enzymes and phytochemicals from neem extract robustly tuned the photocatalytic activity of ZnO for the degradation of malachite green (MG) in aqueous media

The malachite green (MG) is very difficult to degrade in water; thus, it needs an efficient photocatalyst. In this study, neem extract was used to tune the surface and crystal properties of ZnO nanostructures for the photodegradation of MG. The biosynthesized ZnO samples were prepared by hydrothermal method in the presence of 5, 10 and 15 mL of neem extract. The structural characterization has shown nanoparticle like morphology of ZnO as revealed by scanning electron microscopy (SEM) and hexagonal phase was confirmed by powder X-ray diffraction (XRD) technique. The XRD analysis has shown a shift in the 2 theta towards lower angle for ZnO with increasing amount of neem extract. Also, the crystallite particle size of ZnO was decreased with increasing neem extract. The UV–visible spectroscopy has shown the decrease in the optical band gap of ZnO, and the lowest band gap is possessed by ZnO sample produced with 15 mL of neem extract. The ZnO sample obtained with 15 mL of neem extract has shown approximately 99% degradation efficiency for MG for 70 min in aqueous solution. The superior photocatalytic activity of ZnO sample with 15 mL of neem extract could be attributed from the decrease in charge recombination rate due to the decreased optical band gap and particle size.