排序方式: 共有14条查询结果,搜索用时 109 毫秒
1.
2.
3.
4.
5.
This paper comprehensively investigates the properties of self phase modulation based optical delay systems consisting of dispersion compensation fibre and highly nonlinear fibres.It researches into the impacts of power level launched into highly nonlinear fibres,conversion wavelength,dispersion slope,modulation format and optical filter bandwidth on the overall performance of optical delay systems.The results reveal that,if the power launched into highly nonlinear fibres is fixed,the time delay generally varies linearly with the conversion wavelength,but jumps intermittently at some conversion wavelengths.However,the time delay varies semi-periodically with the power launched into highly nonlinear fibres.The dispersion slope of highly nonlinear fibres has significant influence on the time delay,especially for the negative dispersion slope.The time delay differs with modulation formats due to the different combined interaction of nonlinearity and dispersion in fibres.The bandwidth of the optical filters also greatly affects the time delay because it determines the bandwidth of the passed signal in the self phase modulation based time delay systems.The output signal quality of the overall time delay systems depends on the conversion wavelength and input power level.The optimisation of the power level and conversion wavelength to provide the best output signal quality is made at the end of this paper. 相似文献
6.
分别以采摘后的莲藕和水泥微池中种植的莲藕为材料,比较不同除锈剂对根状茎铁膜的去除效果,以期为莲藕根状茎铁膜的田间防除提供依据。在莲藕采后除铁膜实验中,抗坏血酸在较短时间内将莲藕根状茎上的铁膜完全去除干净,除锈效果好,其次是草酸和柠檬酸。抗坏血酸和柠檬酸混合除锈可提高除锈效率,0.000 87 mol/L柠檬酸和0.012 5 mol/L抗坏血酸共混合处理3 h、0.000 43 mol/L柠檬酸和0.012 5 mol/L抗坏血酸混合处理3 h,可提高除锈效率,减少除锈剂使用。可见将抗坏血酸和柠檬酸按一定比例混合施用对铁膜的去除效果更好,其成本较单独使用抗坏血酸或柠檬酸低。 相似文献
7.
可降解树脂包膜控释肥是目前肥料领域的研究热点之一。研究从可降解包膜材料实际施用环境着手,采用傅里叶衰减全反射红外光谱技术(ATR-FTIR),表征包膜肥料膜材自然光和紫外光照条件的降解差异,通过对聚乙烯/疏水纳米二氧化钛、聚乙烯/亲水纳米二氧化钛和纯聚乙烯包膜的谱图来研究膜材在光照前后的结构变化特征,进而对膜材的降解行为做出判断。结果表明,在紫外光和自然光分别照射下,包膜降解过程中的官能团种类没有因光催化剂的加入而受到影响,而光催化剂的加入对官能团的变化程度有显著影响,依次为:聚乙烯/疏水纳米二氧化钛复合包膜>聚乙烯/亲水纳米二氧化钛复合包膜>纯聚乙烯包膜。另外,不同照射光源对包膜的分子结构的影响有所区别。自然光条件照射的降解过程中,包膜的聚乙烯碳链上在形成氢过氧化物的同时发生了交联反应生成含醚键的物质,接着继续氧化生成含羰基的化合物,最终羰基的存在促进包膜的进一步分解;紫外光条件照射下,光照产生的活性氧物种局部浓度大,攻击聚合物碳链的能力强,聚乙烯长链烷基断裂很快氧化生成含有羰基基团的中间产物。紫外光条件的照射实验未能全面反映包膜在自然光条件下的降解行为。 相似文献
8.
9.
以偶氮二异丁腈为引发剂,采用沉淀聚合法在低毒性溶剂乙醇中制备出了平均粒径在2.933μm~4.742μm之间的聚(丙烯酰胺-二乙烯基苯)微球。通过粒度分析、电镜扫描、热重分析,研究不同因素对反应产物的形态和耐温性的影响发现:只有当温度为70℃,交联单体二乙烯基苯的加量控制在25%~50%之间,单体浓度低于4%时,反应才可得到形状规则的微球;增加单体中二乙烯基苯的含量有利于增加微球的耐温性,微球耐温可高达320℃;延长反应时间有利于增大微球粒径,增加引发剂用量有利于降低微球粒径,但二者均能增加微球的产率。 相似文献
10.
设计了一种基于聚合物材料的延迟线阵列与热光开关的集成器件.利用Rsoft软件设计并模拟了多模干涉热光开关的性能,可实现输出光场强度随电极加热温度变化.设计了螺旋结构的延迟线阵列,利用BPM软件对螺旋结构波导进行数值模拟,综合考虑器件尺寸和损耗参量设计出螺旋结构的弯曲半径.将延迟线阵列结构与热光开关进行集成,能够实现热光控制的聚合物延迟线阵列,该器件可实现的最大延迟时间为399.4ps,延迟间隔为9.2ps.以SiO2为下包层,SU-8紫外固化光刻胶为波导芯层,聚甲基丙烯酸甲脂为上包层,采用旋涂、光刻、湿法腐蚀等工艺制备了1×4延迟线阵列与MMI热光开关的集成器件,测试得到了延迟线阵列的近红外输出光斑,插入损耗为15~19dB. 相似文献