排序方式: 共有17条查询结果,搜索用时 15 毫秒
1.
A tunable optical rail is embedded into the cavity of a nonlinear-polarization-rotation(NPR) mode-locked fiber laser to generate a sampling pulse with different repetition frequencies and realize bit-rate-adaptive software synchronous optical sampling.Two ultrashort pulses(20.26677 and 20.22900 MHz) are derived,and a 100-MHz data signal is sampled twice with these pulses based on sum-frequency generation(SFG) in periodically poled lithium niobate(PPLN).The eye diagram is successfully recovered,and an estimated bit rate of 102.22 MHz is derived.This method is feasible for bit rates ranging from 200 MHz to 1 GHz,with <3% relative error. 相似文献
2.
随着大于40 Gb/s高速光通信系统的出现, 为了保证光信号传输质量, 需要对光信号进行监测。对于带宽超过传统光电探测器和示波器可测量带宽的高比特率数据光信号, 光采样技术是进行时域测量的重要手段。采用固定频差的方法可以用百兆速率的采样脉冲对高速光信号进行采样, 降低了对采样后电数据处理系统带宽的要求。在对基于周期极化铌酸锂(PPLN)波导中和频效应的采样过程进行建模仿真的基础上, 实现了对Optsim获得的光传输线内10 Gb/s的非归零码(NRZ)和归零码(RZ)信号的采样。采用软件同步算法对采样数据进行处理, 获得信号的眼图, 这一方法可使采样系统对硬件的要求降到最低。与理想与门获得的采样结果进行比较, 对PPLN波导的光采样特性和采样质量进行了分析。 相似文献
3.
The robustness of the software-synchronized all-optical sampling for optical performance monitoring is estimated for 10-Gb/s fiber communication systems. It reveals that the software-synchronized algorithm is sensitive to the signal degradation caused by chromatic dispersion and nonlinearity in optical fibers. The influence of timing jitter and amplitude fluctuation of the sampling pulses is also investigated. It is found that stringent requirements are imposed on the quality of the sampling pulse and the tolerance of 1-dB Q penalty is measured. Considering the practically available optical sampling pulse sources, the results indicate that the amplitude fluctuation of the sampling pulses has the dominant impacts on the software-synchronized method. 相似文献
4.
A software synchronous optical sampling system is constructed based on sum frequency generation (SFG) in periodically poled lithium niobate (PPLN). Five gigahertz of a non-return-to-zero (NRZ) data signal is sampled by sampling pulse with the repetition frequency of 29.31 MHz. The power of the SFG light is set at 23 dBm, and an eye diagram is successfully recovered. A band-pass filter is added before the sampling pulse is subjected to erbium-doped fiber amplifier to reduce gain competition and ensure a high power level of SFG. 相似文献
5.
6.
7.
建立了包含载流子浓度脉动(CDP)、自由载流子吸收(FCA)、受激辐射(SE)、双光子吸收(TPA)、光谱烧孔(SHB)和超快非线性折射(UNR)过程的半导体光放大器(SOA)理论模型,通过与已报道的实验结果的比较对模型进行了验证,实现了对已有 SOA模型的修正,并对UNR,FCA和TPA效应对强超短光脉冲传输特性的影响进行了分析.当脉宽为几个皮秒的强光脉冲注入工作于透明电流下的SOA时,其强度特性主要受FCA和TPA效应的影响.由于加入了FCA效应,使模型对200fs脉冲强度传输特性的仿真结果与实验结果
关键词:
非线性过程
强超短光脉冲
SOA理论模型
增益透明 相似文献
8.
9.
This paper comprehensively investigates the properties of self phase modulation based optical delay systems consisting of dispersion compensation fibre and highly nonlinear fibres.It researches into the impacts of power level launched into highly nonlinear fibres,conversion wavelength,dispersion slope,modulation format and optical filter bandwidth on the overall performance of optical delay systems.The results reveal that,if the power launched into highly nonlinear fibres is fixed,the time delay generally varies linearly with the conversion wavelength,but jumps intermittently at some conversion wavelengths.However,the time delay varies semi-periodically with the power launched into highly nonlinear fibres.The dispersion slope of highly nonlinear fibres has significant influence on the time delay,especially for the negative dispersion slope.The time delay differs with modulation formats due to the different combined interaction of nonlinearity and dispersion in fibres.The bandwidth of the optical filters also greatly affects the time delay because it determines the bandwidth of the passed signal in the self phase modulation based time delay systems.The output signal quality of the overall time delay systems depends on the conversion wavelength and input power level.The optimisation of the power level and conversion wavelength to provide the best output signal quality is made at the end of this paper. 相似文献
10.
基于异步延迟采样和人工神经网络统计学习提出了一种光通信性能监测方法。通过对高速光信号进行异步延迟采样,获得信号二维幅度直方图,然后提取其中特征参数并对人工神经网络进行训练,最后以人工神经网络的预测输出实现对光信号损伤的监测。构建10 Gb/s非归零码开关键控,40 Gb/s光学双二进制码和归零码差分移相键控光通信仿真系统,并对光信噪比、色散和偏振模色散损伤进行监测。仿真结果表明,所提方法对被监测光信号的速率、码型调制格式透明,可同时准确监测多种并存的传输损伤,损伤参数监测误差小于5%。该方法具有电域处理带宽要求低、采样机制简单的特点,适用于分布式在线光性能监测。 相似文献