Li3N、Mg3N2、Ca3N2催化作用的比较和分析

 Li₃N、Mg₃N₂和Ca₃N₂是高温高压下以hBN为原料合成cBN的催化剂。在实验中发现它们对常压高温下生成hBN的反应也表现出催化作用。对比了三种氮化物催化效果的差异，发现三种氮化物都只有在熔融状态下才能表现出催化效果，以及三种氮化物对生成hBN反应的催化效果与它们在高温高压下合成cBN反应的催化效果次序相似。提出了对合成hBN有催化作用的化合物也将对合成cBN表现出催化作用的观点。     

城市垃圾与煤在CFBC试验台上的混烧试验

城市垃圾的焚烧处理一直是人们关注的研究领域。本文详细报告了一种城市垃圾与劣质煤在0.15兆瓦CFBC试验台上的混烧试验。试验结果表明,城市垃圾与劣质煤在循环流化床中的混烧可以很好地满足稳定和高温燃烧的要求,通过添加石灰石等含钙物料可以有效地在燃烧过程巾控制SO2、HCl和二(?)英类污染物的生成。     

Nickel-catalyzed synthesis of 9-monoalkylated fluorenes from 9-fluorenone hydrazone and alcohols

A practical protocol was disclosed for the nickel-catalyzed C-alkylation of 9-fluorenone hydrazone with alcohols using t-BuOK as the base, and 9-monoalkylated fluorene derivatives were obtained in good yields under the benign conditions.     

Palladium-catalyzed ortho-C–H silylation of biaryl aldehydes using a transient directing group

A strategy for Pd-catalyzed ortho-C–H silylation of biaryl aldehydes enabled by a transient auxiliary is presented. This protocol provides a broad range of ortho-silylated biaryl aldehydes in good yields. The silyl moiety can be further functionalized under mild conditions, rendering the silylated products useful building blocks. Notably, this protocol also offers an opportunity to establish a platform for expeditious synthesis of structurally diverse axially chiral biaryl aldehydes via sequential atroposelective interannular C–H functionalization/intraanular C–H silylation.     

CVD金刚石薄膜探测器性能研究

通过实验测量和理论分析, 从载流子动力学角度研究了用于脉冲辐射探测的CVD金刚石薄膜探测器的适用结构、电荷收集效率和时间响应性能. 结果表明, CVD金刚石薄膜可以制成均匀型结构的探测器; 薄膜中的缺陷会降低探测器的电荷收集效率, 探测器的电荷收集效率随场强增大而增大直至饱和. 已研制的CVD金刚石探测器电荷收集时间可达719ps, 在2.5V/μm场强下达到饱和, 电荷收集效率 达60.5%; 晶格散射是影响探测器时间响应的主要因素, 选用大晶粒甚至单晶金刚石薄膜可以提高探测器时间响应.     

Quantitative analysis of levodopa, carbidopa and methyldopa in human plasma samples using HPLC-DAD combined with second-order calibration based on alternating trilinear decomposition algorithm

An HPLC method combined with second-order calibration based on alternating trilinear decomposition (ATLD) algorithm has been developed for the quantitative analysis of levodopa (LVD), carbidopa (CBD) and methyldopa (MTD) in human plasma samples. Prior to the analysis of the analytes by ATLD algorithm, three time regions of chromatograms were selected purposely for each analyte to avoid serious collinearity. Although the spectra of these analytes were similar and interferents coeluted with the analytes studied in biological samples, good recoveries of the analytes could be obtained with HPLC-DAD coupled with second-order calibration based on ATLD algorithm, additional benefits are decreasing times of analysis and less solvent consumption. The average recoveries achieved from ATLD with the factor number of 3 (N = 3) were 100.1 ± 2.1, 96.8 ± 1.7 and 104.2 ± 2.6% for LVD, CBD and MTD, respectively. In addition, elliptical joint confidence region (EJCR) tests as well as figures of merit (FOM) were employed to evaluate the accuracy of the method.     

Quantitative analysis of triazine herbicides in environmental samples by using high performance liquid chromatography and diode array detection combined with second-order calibration based on an alternating penalty trilinear decomposition algorithm

A novel application of second-order calibration method based on an alternating penalty trilinear decomposition (APTLD) algorithm is presented to treat the data from high performance liquid chromatography-diode array detection (HPLC-DAD). The method makes it possible to accurately and reliably analyze atrazine (ATR), ametryn (AME) and prometryne (PRO) contents in soil, river sediment and wastewater samples. Satisfactory results are obtained although the elution and spectral profiles of the analytes are heavily overlapped with the background in environmental samples. The obtained average recoveries for ATR, AME and PRO are 99.7 ± 1.5, 98.4 ± 4.7 and 97.0 ± 4.4% in soil samples, 100.1 ± 3.2, 100.7 ± 3.4 and 96.4 ± 3.8% in river sediment samples, and 100.1 ± 3.5, 101.8 ± 4.2 and 101.4 ± 3.6% in wastewater samples, respectively. Furthermore, the accuracy and precision of the proposed method are evaluated with the elliptical joint confidence region (EJCR) test. It lights a new avenue to determine quantitatively herbicides in environmental samples with a simple pretreatment procedure and provides the scientific basis for an improved environment management through a better understanding of the wastewater-soil-river sediment system as a whole.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

Cosmic ray test for a T0 detector

The endcap of time-of-flight (ETOF) detector in BES (Beijing Spectrometer) III is planned to be upgraded by using multi-gap resistive plate chambers (MRPCs) and the designed time resolution of the MRPCs is around 50 ps. Thus a time-zero (T0) detector needs to be built to offer a high quality reference time for the MRPCs beam test. So a T0 detector is built using plastic scintillator tiles (BC420) to couple with four fast phototubes (PMTs, Hamamatsu H6533). The timing properties of the detector is studied by using a cosmic ray test and factors related to the time resolution, such as plastic scintillator size, readout mode and angle effects, are discussed. T0 detector timing resolutions of ～41-62 ps are achieved, which means that the T0 detector can be used in the MRPC beam test.