毛细管气相色谱法测定健康人外周血单个核细胞磷脂脂肪酸组成

采用毛细管气相色谱法对输注脂肪乳剂的健康志愿者外周血单个核细胞磷脂脂肪酸组成进行了分析测定 ,并将定量结果与输注脂肪乳剂前进行了比较 ,结果表明 :与输注脂肪乳剂前相比 ,连续 7d外周静脉输注 2 0 %脂肪乳剂 (2 5 0mL d) ,外周血单个核细胞数无明显变化 ;外周血单个核细胞磷脂酰乙醇胺中棕榈酸(P <0 .0 5 )和油酸 (P <0 .0 1 )明显增加 ,硬脂酸下降 ;磷脂酰胆碱中棕榈油酸 (P <0 .0 5 )和亚麻酸 (P <0 .0 5 )明显增加 ,而两种磷脂中花生四烯酸及其它多不饱和脂肪酸、饱和脂肪酸与不饱和脂肪酸的比值以及脂肪酸的不饱和指数均未发生明显变化。     

Acid‐Labile Thermoresponsive Copolymers That Combine Fast pH‐Triggered Hydrolysis and High Stability under Neutral Conditions

Biodegradable polymeric materials are intensively used in biomedical applications. Of particular interest for drug‐delivery applications are polymers that are stable at pH 7.4, that is, in the blood stream, but rapidly hydrolyze under acidic conditions, such as those encountered in the endo/lysosome or the tumor microenvironment. However, an increase in the acidic‐degradation rate of acid‐labile groups goes hand in hand with higher instability of the polymer at pH 7.4 or during storage, thus posing an intrinsic limitation on fast degradation under acidic conditions. Herein, we report that a combination of acid‐labile dimethyldioxolane side chains and hydroxyethyl side chains leads to acid‐degradable thermoresponsive polymers that are quickly hydrolyzed under slightly acidic conditions but stable at pH 7.4 or during storage. We ascribe these properties to high hydration of the hydroxy‐containing collapsed polymer globules in conjunction with autocatalytic acceleration of the hydrolysis reactions by the hydroxy groups.     

惠斯登电桥测量灵敏度研究

讨论测量仪表、测量放大器与惠斯登电桥测量灵敏度的关系,研究如何提高惠斯登电桥测量灵敏度。     

One‐Pot Preparation of Inert Well‐Defined Polymers by RAFT Polymerization and In Situ End Group Transformation

A one‐pot procedure that straightforwardly combines reversible addition‐fragmentation chain transfer (RAFT) polymerization and end group transformation to remove the RAFT end groups is developed for the synthesis of well‐defined poly(meth)acrylates and polyacrylamides with inert end groups. This procedure only requires the addition of an amine at the end of the standard RAFT polymerization procedure, which avoids the separation and purification of the intermediate polymers and, hence, extremely reduces the working time and utilized amount of solvents. Upon addition of the amine, a thiol group is formed by aminolysis of the thiocarbonylthio group, which subsequently undergoes Michael addition with unreacted monomer leading to an inert thioether functionalized polymer.

     

Facile Synthesis of Platinum–Cerium(IV) Oxide Hybrids Arched on Reduced Graphene Oxide Catalyst in Reverse Micelles with High Activity and Durability for Hydrolysis of Ammonia Borane

Highly dispersed Pt‐CeO₂ hybrids arched on reduced graphene oxide (Pt‐CeO₂/rGO) were facilely synthesized by a combination of the reverse micelle technique and a redox reaction without any additional reductant or surfactant. Under a N₂ atmosphere, the redox reaction between Ce³⁺ and Pt²⁺ occurs automatically in alkaline solution, which results in the formation of Pt‐CeO₂/rGO nanocomposites (NCs). The as‐synthesized Pt‐CeO₂/rGO NCs exhibit superior catalytic performance relative to that shown by the free Pt nanoparticles, Pt/rGO, Pt‐CeO₂ hybrid, and the physical mixture of Pt‐CeO₂ and rGO; furthermore, the nanocomposites show significantly better activity than the commercial Pt/C catalyst toward the hydrolysis of ammonia borane (NH₃BH₃) at room temperature. Moreover, the Pt‐CeO₂/rGO NCs have remarkable stability, and 92 % of their initial catalytic activity is preserved even after 10 runs. The excellent activity of the Pt‐CeO₂/rGO NCs can be attributed not only to the synergistic structure but also to the electronic effects of the Pt‐CeO₂/rGO NCs among Pt, CeO₂, and rGO.     

A novel method to fabricate lithium-ion polymer batteries based on LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>/NG electrodes

A novel method to fabricate lithium-ion polymer batteries (LiPBs) has been developed. The LiPBs was fabricated without microporous polyolefin separators, taking spinel lithium manganese oxide (LiMn₂O₄) and natural graphite (NG) as the electrodes. The thicknesses of the cathodes and the anodes are 190 and 110 μm, respectively. The NG anode was coated with a microporous composite polymer film (20 μm thick) which composed of polymer and ultrafine particles. The coating process was effective and simple to be used in practical application, and ensured the composite polymer film to act as a good separator in the LiPB. The LiPBs assembled with the coated NG anodes and pristine LiMn₂O₄ cathodes presented better electrochemical performances than liquid lithium-ion battery counterparts, proving that the microporous composite polymer film can improve the performance of the coated NG anode. In this paper, the spinel LiMn₂O₄/(coated)NG-based LiPBs exhibited high rate capability, compliant temperature reliability, and significantly, excellent cycling performance under the elevated temperature (55°C).     

梳状P(MMA-co-MAh)-g-PEGME共聚物的合成及结构与性能

用自制的甲基丙烯酸甲酯和马来酸酐的共聚物P(MMA-co-MAh)为反应物,聚乙二醇单甲醚(PEGME)为接枝单体,合成了梳状P(MMA-co-MAh)共聚物多缩乙二醇酯(P(MMA-co-MAh)-g-MPEG).采用傅立叶红外光谱(FTIR)、核磁共振(NMR)13C谱、1H谱以及H,C-COSP谱对所合成的梳状共聚物结构进行表征;热失重分析(TGA)和示差扫描量热法(DSC)对所合成的共聚物的物理性能进行了分析.FTIR及NMR结果表明,聚乙二醇单甲醚通过酯化反应接枝到P(MMA-co-MAh)共聚物上,形成以MMA/MAh共聚物为主链,聚乙二醇单甲醚为侧链的梳状共聚物,其在马来酸酐上的接枝率大约为20%;热性能分析结果表明,合成的梳状共聚物热分解温度与共聚物P(MMA-co-MAh)的分解温度相差不大,接枝后的梳状共聚物也具有高的热稳定性,起始热分解温度在325.9℃左右,且该梳状共聚物具有两个玻璃化转变温度,一个是由于侧链的玻璃化转变引起的,温度为32℃左右;一个是主链的玻璃化转变引起的,温度为120℃左右.在主链玻璃化转变温度以下,侧链是可以移动的,有利于电活性物质和离子等在聚合物基体中的扩散和迁移.     

氨硼烷催化水解制氢

氢气作为全球公认的清洁能源载体,备受关注。寻找安全高效的储氢材料以转型到氢能社会是当前氢能应用面临最大的挑战之一。氨硼烷(NH₃BH₃,AB)具有非常高的储氢质量分数(19.6 wt%)和体积储氢密度(0.145 kgH₂/L),因其在储氢和放氢性能方面的显著优势,被认为是一种颇具应用潜力的化学储氢材料。氨硼烷能够通过热解、醇解和水解放出氢气。其中,氨硼烷水解制氢可以通过催化剂进行可控放氢,且具有反应条件温和、不产生CO(易使催化剂中毒)等优点,被认为是一种安全高效和实用性强的制氢技术。本文简要介绍了氨硼烷的性质和合成,阐述了氨硼烷水解制氢的机理,综述了近年来氨硼烷水解制氢催化剂的研究进展,分析了碱对氨硼烷水解制氢的促进作用,并讨论了水解产物回收利用问题。     

配备于自旋回波仪的计算机系统

本文介绍配备在自旋回波仪中的计算机系统,由TP-801计算机、外围设备、接口电路和一套应用软件组成。该系统可以产生自旋回波实验所需要的多种脉冲序列,包括90°-90°、90°-180°、180°-90°、Carr-Purcell序列等。同时,计算机采集回波信号或FID,并进行数据处理,其结果可以直接由计算机或示波器、绘图仪显示,也可以存入磁带。仪器可以快速准确地测量弛豫时间T₁、T₂,也适用于核磁共振自旋回波方面的教学。在本文结束部分给出了一些样品的测量结果。本文介绍的计算机系统可以和普通的CW-NMR谱仪结合,使之增加自旋回波测量功能。     

三联苯基配体稳定的锇-锗配合物合成及表征

研究了锇-锗单键双金属配合物[OsGe(ArTrip)(PPh₃)(H) Cl₂] (1)的反应性, 其中 ArTrip=C₆H₃-2-(η⁶-Trip)-6-Trip, Trip=2, 4,6-ⁱPr₃-C₆H₃。通过与不同试剂反应, 成功合成并表征了 3个新型锇-锗双金属配合物。通过配合物 1与 EtMgBr反应合成了锗原子上氯原子被溴原子取代的产物[OsGe(ArTrip)(PPh₃)(H)Br₂] (2); 1 与 LiHBEt₃反应合成了锗原子上氯原子被乙基取代的产物[OsGe(ArTrip)(PPh₃)(H) Et₂] (3); 1 与 HBF₄ 作用合成了加成产物[OsGe(ArTrip)(PPh₃)(H)₂Cl₂]BF₄ (4)。配合物 4 不稳定, 在 H₂O(n_H2O/n₄=1)作用下能转化为配合物 1。