Nitro- and fluoropolyformals. III. Copolyformals from mixtures of fluoro- and nitro-α,ω-diols

Polyformals of fluoro-, nitramine-, and C-nitrodiols show widely differing properties with respect to glass transition temperature, melting transition, and solubility. Polymers with desirable combinations of these properties, e.g., low T_g, high nitro content, and good solubility in polar solvents, were expected to result from acid-promoted copolycondensation of appropriate mixtures of diols with formaldehyde. A series of such condensations were carried out and the polymers obtained from binary mixtures of fluoro- and nitrodiols, different nitrodiols, and fluoro- or nitrodiols and carboranediols, were characterized by GPC, ¹H-NMR, and DSC analysis.     

Synthesis of 1‐amino‐2‐methylindoline by Raschig process: Kinetics of the oxidation of 1‐amino‐2‐methylindoline by chloramine

The synthesis of 1‐amino‐2‐methylindoline by the Raschig process was undertaken in aqueous solution. The principal side reaction that occurs in the medium is the oxidation of 1‐amino‐2‐methylindoline formed by chloramine. To increase the yield of 1‐amino‐2‐methylindoline, its oxidation by chloramine was studied by GC and HPLC at various concentrations of reactants and for a pH interval ranging between 9.9 and 13.5. The reaction is bimolecular and exhibits a specific acid catalysis. In alkaline medium, 1‐amino‐2‐methylindole is the principal product. The enthalpy and entropy of activation were determined at pH 12.89. In unbuffered solution, the interaction was autocatalyzed by the ammonium ions formed, which indicates a competitive oxidation of neutral and ionic forms of 1‐amino‐2‐methylindoline by chloramine. A mathematical treatment based on one implicit equation allows a quantitative interpretation of all the phenomena observed over the above pH interval. It takes both acid–base dissociation equilibrium and alkaline hydrolysis of chloramine into account. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 515–523, 2002     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

Non empirical quantum mechanical calculations of the1H,13C,15N and17O magnetic shielding constants and of the spin-spin coupling constants in formamide,hydrated formamide and N-methylformamide

The magnetic shielding constants of the different atoms of formamide, hydrated formamide and N-methylformamide are calculated by anab initio method. For the protons of formamide the measured differences between their chemical shifts are correctly reproduced by theory, provided that the molecular geometry used as input is carefully chosen. The differences between the values of the magnetic shielding constants calculated for formamide and hydrated formamide show that intermolecular hydrogen bonding produces variations of chemical shifts for all the atoms of the molecule except the formyl proton. The calculated chemical shift variations between formamide and N-methylformamide are compared to the experimental values and discussed in relation with different hydrogen bonding possibilities of the two molecules. The calculation of the contact term of the spin-spin coupling constants of formamide and hydrated formamide shows that in most cases the measured trends are satisfactorily reproduced and that the variations of these terms upon hydration are less than 3%.     

Cellulose synthesis in maize: isolation and expression analysis of the cellulose synthase (CesA) gene family

Stalk lodging in maize results in significant yield losses. We have determined that cellulose per unit length of the stalk is the primary determinant of internodal strength. An increase in cellulose concentration in the wall might allow simultaneous improvements in stalk strength and harvest index. Cellulose formation in plants can be perturbed by mutations in the genes involved in cellulose synthesis, post-synthetic cellulose alteration or deposition, N-glycosylation, and some other genes with as yet unknown functions. We have isolated 12 members of the cellulose synthase (CesA) gene family from maize. The genes involved in primary wall formation appear to have duplicated relatively independently in dicots and monocots. The deduced amino acid sequences of three of the maize genes, ZmCesA10–12, cluster with the Arabidopsis CesA sequences that have been shown to be involved in secondary wall formation. Based on their expression patterns across multiple tissues, these three genes appear to be coordinately expressed. The remaining genes show overlapping expression to varying degrees with ZmCesA1, 7, and 8 forming one group, ZmCesA3 and 5 a second group, and ZmCesA2 and 6 exhibiting independent expression of any other gene. This suggests that the varying levels of coexpression may just be incidental except in the case of ZmCesA10–12, which may interact with each other to form a functional enzyme complex. Isolation of the expressed CesA genes from maize and their association with primary or secondary wall formation has made it possible to test their respective roles in cellulose synthesis through mutational genetics or transgenic approaches. This information would be useful in improving stalk strength.     

Polyimide and SU-8 microfluidic devices manufactured by heat-depolymerizable sacrificial material technique

The following paper describes a sacrificial layer method for the manufacturing of microfluidic devices in polyimide and SU-8. The technique uses heat-depolymerizable polycarbonates embedded in polyimide or SU-8 for the generation of microchannels and sealed cavities. The volatile decomposition products originating from thermolysis of the sacrificial material escape out of the embedding material by diffusion through the cover layer. The fabrication process was studied experimentally and theoretically with a focus on the decomposition of the sacrificial materials and their diffusion through the polyimide or SU-8 cover layer. It is demonstrated that the sacrificial material removal process is independent of the actual channel geometry and advances linearly with time unlike conventional sacrificial layer techniques. The fabrication method provides a versatile and fast technique for the manufacturing of microfluidic devices for applications in the field of microTAS and Lab-on-a-Chip.     

A simplified method for molecular correlation energy calculations by separation into internal and non-internal parts. Application to multiconfigurational zeroth-order wavefunctions

A simplified method of determining the molecular correlation energy by two separate calculations, one for the internal and one for the non-internal correlation energies, is extended to multiconfigurational zeroth-order wavefunctions. This extension offers the possibility of deriving correlated potential energy curves or surfaces for processes involving configurational changes. The internal correlation energy is shown to be correctly determined by an MC/CI procedure combining the use of minimal and extended basis sets. An original semi-empirical “atoms-in-molecules” method based on the L.C.A.O. expansion of the molecular wavefunction is proposed for the non-internal correlation energy calculations. This method is shown to be able to overcome some of the shortcomings of a previous populations analysis approach. Test calculations concern potential curve parameters (D _e ,T _e ,R _e ,W _e ) of the ground and some excited states of the NH, C₂, HCN and CN molecules. The results are found to be in good agreement with corresponding experimental and large CI results. Aspirant du Fonds National Belge de la Recherche Scientifique Boursier I.R.S.I.A.     

High Performance Varistor Discs Obtained from Chemically Synthesized Doped Zinc Oxide Powder

The ceramic microstructure, the chemical homogeneity of specific dopants and the mechanical integrity of a varistor disc are critical parameters in determining the transient voltage suppression features of these devices. The material properties and overall quality of the starting ceramic powders used to produce such components are essential in achieving the desired properties. The present work describes a novel chemical method developed to produce doped zinc oxide powders and an industrial scale manufacturing process for the production of final varistor blocks for surge arrester applications. The results are compared with those obtained when using standard varistor powder made by the mixed oxide route is used. All the fundamental electrical properties of the discs have been determined and correlated with the relevant manufacturing steps.