The Structural Fate of Individual Multicomponent Metal‐Oxide Nanoparticles in Polymer Nanoreactors

Multicomponent nanoparticles can be synthesized with either homogeneous or phase‐segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal‐oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized by using scanning probe block copolymer lithography and characterized using correlated electron microscopy. These studies revealed that the miscibility, ratio of the metallic components, and the synthesis temperature determine the crystal structure and architecture of the nanoparticles. A Co‐Ni‐O system forms a rock salt structure largely owing to the miscibility of CoO and NiO, while Cu‐Ni‐O, which has large miscibility gaps, forms either homogeneous oxides, heterojunctions, or alloys depending on the annealing temperature and composition. Moreover, a higher‐ordered structure, Co‐Ni‐Cu‐O, was found to follow the behavior of lower ordered systems.     

Effects of shape and size of cobalt ferrite nanostructures on their MRI contrast and thermal activation

Cobalt ferrite magnetic nanostructures were synthesized via a high temperature solution phase method. Spherical nanostructures of various sizes were synthesized with the help of seed mediated growth of the nanostructures in organic phase, while faceted irregular (FI) cobalt ferrite nanostructures were synthesized via the same method but in the presence of a magnetic field. Magnetic properties were characterized by SQUID magnetometry, relaxivity measurements and thermal activation under RF field, as a function of size and shape. The results show that the saturation magnetization of the nanostructures increases with an increase in size, and the FI nanostructures exhibit lower saturation magnetization than their spherical counterparts. The relaxivity coefficient of cobalt ferrite nanostructures increases with increase in size; while FI nanostructures show a higher relaxivity coefficient than spherical nanostructures with respect to their saturation magnetization. In the case of RF thermal activation, the specific absorption rate (SAR) of nanostructures increases with increase in the size. The contribution sheds light on the role of size and shape on important magnetic properties of the nanostructures in relation to their biomedical applications.     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

Thermoelectrics from abundant chemical elements: high-performance nanostructured PbSe-PbS

We report promising thermoelectric properties of the rock salt PbSe-PbS system which consists of chemical elements with high natural abundance. Doping with PbCl(2), excess Pb, and Bi gives n-type behavior without significantly perturbing the cation sublattice. Thus, despite the great extent of dissolution of PbS in PbSe, the transport properties in this system, such as carrier mobilities and power factors, are remarkably similar to those of pristine n-type PbSe in fractions as high as 16%. The unexpected finding is the presence of precipitates ~2-5 nm in size, revealed by transmission electron microscopy, that increase in density with increasing PbS concentration, in contrast to previous reports of the occurrence of a complete solid solution in this system. We report a marked impact of the observed nanostructuring on the lattice thermal conductivity, as highlighted by contrasting the experimental values (~1.3 W/mK) to those predicted by Klemens-Drabble theory at room temperature (~1.6 W/mK). Our thermal conductivity results show that, unlike in PbTe, optical phonon excitations in PbSe-PbS systems contribute to heat transport at all temperatures. We show that figures of merit reaching as high as ~1.2-1.3 at 900 K can be obtained, suggesting that large-scale applications with good conversion efficiencies are possible from systems based on abundant, inexpensive chemical elements.     

Locally enhanced relative humidity for scanning probe nanolithography

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.     

Direct evidence of oxidized gold on supported gold catalysts

Supported gold catalysts have drawn worldwide interest due to the novel properties and potential applications in industries. However, the origin of the catalytic activity in gold nanoparticles is still not well understood. In this study, time-of-flight secondary ion mass spectroscopy (TOF-SIMS) has been applied to investigate the nature of gold in Au (1.3 wt %)/gamma-Al2O3 and Au (2.8 wt %)/TiO2 catalysts prepared by the deposition-precipitation method. The SIMS spectrum of the supported gold catalysts presented AuO-, AuO2-, and AuOH- ion clusters. These measurements show direct evidence for oxidized gold on supported gold catalysts and may be helpful to gaining better understanding of the origin of the catalytic activity.     

Atomic Structure and Properties of the (310) Symmetrical Tilt Grain Boundary (STGB) in SrTiO3 Part II: Comparison with Experimental Studies

The atomistic simulation results presented in Part I for SrTiO₃ (310) symmetrical tilt grain boundary (STGB, the so-called = 5 GB with 36.8° symmetrical misorientation about [001]) are analyzed in the context of available experimental studies. In particular, atomic imaging studies of SrTiO₃ GBs via high resolution TEM and incoherent Z-contrast STEM imaging; and determination of oxygen positions by combining electron energy loss spectroscopy (EELS) and bond-valence-sum rules, are compared with simulation results. The atomistic simulation data on the GB energies are compared with relative experimental estimates obtained via a novel approach of faceting of focused ion beam (FIB) induced microvoids.While there are considerable differences in details of simulation and experimental results, some basic trends seem to emerge about the core structural framework of GBs in SrTiO₃. The paper highlights the limitations of both, experimental and simulation techniques, and argues in favor of synergistic use of diverse experimental and simulation approach to determine the atomic structure and properties of GBs.