Characterization of archaeological frankincense by gas chromatography-mass spectrometry

A simple gas chromatography-mass spectrometry (GC-MS) method has been developed for the characterization of frankincense in archaeological samples. After trimethylsilylation of the methanolic extract, 15 triterpenoids have been found among the chemical constituents of commercial olibanum (alpha-boswellic acid, 3-O-acetyl-alpha-boswellic acid, beta-boswellic acid, 3-O-acetyl-beta-boswellic acid, alpha-amyrin, beta-amyrin, lupeol, 3-epi-beta-amyrin, 3-epi-beta-amyrin, 3-epi-lupeol, alpha-amyrenone, beta-amyrenone, lupenone, 3alpha-hydroxy-lup-20(29)-en-24-oic acid and 3-O-acetyl-hydroxy-lup-20(29)-en-24-oic acid). These compounds have been unequivocally identified by retention time and mass spectral comparison with pure standards previously isolated, for the most part, in our laboratory. Within these triterpenes, acid ones, the corresponding O-acetates, and their products of degradation were found to be characteristic of frankincense (Boswellia resin). The presence of these unusual triterpenic compounds in an archaeological resinous sample, recovered during excavations from Dahshour site (Egypt, XIIth Dynasty), enabled us to identify unambiguously frankincense resin among several other materials. Additional chromatographic peaks of this sample were assigned to broad chemical classes using retention time and mass spectra features.     

Synthesis of 1‐amino‐2‐methylindoline by Raschig process: Kinetics of the oxidation of 1‐amino‐2‐methylindoline by chloramine

The synthesis of 1‐amino‐2‐methylindoline by the Raschig process was undertaken in aqueous solution. The principal side reaction that occurs in the medium is the oxidation of 1‐amino‐2‐methylindoline formed by chloramine. To increase the yield of 1‐amino‐2‐methylindoline, its oxidation by chloramine was studied by GC and HPLC at various concentrations of reactants and for a pH interval ranging between 9.9 and 13.5. The reaction is bimolecular and exhibits a specific acid catalysis. In alkaline medium, 1‐amino‐2‐methylindole is the principal product. The enthalpy and entropy of activation were determined at pH 12.89. In unbuffered solution, the interaction was autocatalyzed by the ammonium ions formed, which indicates a competitive oxidation of neutral and ionic forms of 1‐amino‐2‐methylindoline by chloramine. A mathematical treatment based on one implicit equation allows a quantitative interpretation of all the phenomena observed over the above pH interval. It takes both acid–base dissociation equilibrium and alkaline hydrolysis of chloramine into account. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 515–523, 2002     

Controlled synthesis of poly(acetone oxime acrylate) as a new reactive polymer: Stimuli-responsive reactive copolymers

Acetone oxime acrylate has been synthesized as a new active ester monomer. Free radical polymerization yielded a reactive polymer soluble in various organic solvents, such as chloroform, dioxane, DMSO, acetone, methanol, dichloromethane, DMF, and ethanol. Controlled radical polymerization of acetone oxime acrylate was successfully conducted using the RAFT, NMP and Iniferter method. Partly polymer analogous reaction with N-isopropylamine resulted in the reactive copolymer poly(N-isopropylacrylamide-co-acetone oxime acrylate), which featured a lower critical solution temperature (LCST) of 61 °C in water. Further, the reactivity of the copolymer was exemplary proven by complete reaction with ammonia yielding poly(N-isopropylacrylamide-co-acrylamide), which does not possess a LCST.     

Transparent conducting oxides: texture and microstructure effects on charge carrier mobility in MOCVD-derived CdO thin films grown with a thermally stable, low-melting precursor

A series of low-melting, thermally stable cadmium metal-organic chemical vapor deposition (MOCVD) precursors have been synthesized, structurally and spectroscopically characterized, and implemented in growth of highly conductive and transparent CdO thin films. One member of the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentanedionato)(N,N-diethyl-N',N'-dimethyl-ethylenediamine)cadmium(II), Cd(hfa)(2)()(N,N-DE-N',N'-DMEDA), represents a particularly significant improvement over previously available Cd precursors, owing to the low melting point and robust thermal stability. High-quality CdO films were grown by MOCVD on glass and single-crystal MgO(100) between 300 and 412 degrees C. Film growth parameters and substrate surface have large effects on microstructure and electron carrier transport properties. Enhanced mobilities observed for highly biaxially textured films grown on MgO(100) vs glass are attributed, on the basis of DC charge transport and microstructure analysis, to a reduction in neutral impurity scattering and/or to a more densely packed grain microstructure. Although single-grained films grown on MgO(100) exhibit greater mobilities than analogues with discrete approximately 100 nm grains and similar texture, this effect is attributed, on the basis of charge transport and Hall effect measurements as well as optical reflectivity analysis, to differences in carrier concentration rather than to reduced grain boundary scattering. Unprecedented conductivities and mobilities as high as 11,000 S/cm and 307 cm(2)/V.s, respectively, are obtained for epitaxial single-grained films (X-ray diffraction parameters: fwhm(omega) = 0.30 degrees, fwhm(phi) = 0.27 degrees ) grown in situ on MgO(100) at a relatively low temperature (400 degrees C).     

Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Non empirical quantum mechanical calculations of the1H,13C,15N and17O magnetic shielding constants and of the spin-spin coupling constants in formamide,hydrated formamide and N-methylformamide

The magnetic shielding constants of the different atoms of formamide, hydrated formamide and N-methylformamide are calculated by anab initio method. For the protons of formamide the measured differences between their chemical shifts are correctly reproduced by theory, provided that the molecular geometry used as input is carefully chosen. The differences between the values of the magnetic shielding constants calculated for formamide and hydrated formamide show that intermolecular hydrogen bonding produces variations of chemical shifts for all the atoms of the molecule except the formyl proton. The calculated chemical shift variations between formamide and N-methylformamide are compared to the experimental values and discussed in relation with different hydrogen bonding possibilities of the two molecules. The calculation of the contact term of the spin-spin coupling constants of formamide and hydrated formamide shows that in most cases the measured trends are satisfactorily reproduced and that the variations of these terms upon hydration are less than 3%.     

Disorder effects in Mn12–acetate at 83 K

The structure of hexadeca‐μ‐acetato‐tetra­aqua­dodeca‐μ₃‐oxo‐dodecamanganese bis(acetic acid) tetrahydrate, [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O, known as Mn₁₂–acetate, has been determined at 83 (2) K by X‐ray diffraction methods. The fourfold (S₄) molecular symmetry is disrupted by a strong hydrogen‐bonding interaction with the disordered acetic acid mol­ecule of solvation, which displaces one of the acetate ligands in the cluster. Up to six Mn₁₂ isomers are potentially present in the crystal lattice, which differ in the number and arrangement of hydrogen‐bonded acetic acid mol­ecules. These results considerably improve the structural information available on this molecular nanomagnet, which was first synthesized and characterized by Lis [Acta Cryst. (1980), B 36 , 2042–2046].     

Polyimide and SU-8 microfluidic devices manufactured by heat-depolymerizable sacrificial material technique

The following paper describes a sacrificial layer method for the manufacturing of microfluidic devices in polyimide and SU-8. The technique uses heat-depolymerizable polycarbonates embedded in polyimide or SU-8 for the generation of microchannels and sealed cavities. The volatile decomposition products originating from thermolysis of the sacrificial material escape out of the embedding material by diffusion through the cover layer. The fabrication process was studied experimentally and theoretically with a focus on the decomposition of the sacrificial materials and their diffusion through the polyimide or SU-8 cover layer. It is demonstrated that the sacrificial material removal process is independent of the actual channel geometry and advances linearly with time unlike conventional sacrificial layer techniques. The fabrication method provides a versatile and fast technique for the manufacturing of microfluidic devices for applications in the field of microTAS and Lab-on-a-Chip.