Toward Fuzzy Optimization without Mathematical Ambiguity

Fuzzy programming has been discussed widely in literature and applied in such various disciplines as operations research, economic management, business administration, and engineering. The main purpose of this paper is to present a brief review on fuzzy programming models, and classify them into three broad classes: expected value model, chance-constrained programming and dependent-chance programming. In order to solve general fuzzy programming models, a hybrid intelligent algorithm is also documented. Finally, some related topics are discussed.     

弱(L_1,L_2)-BLD映射的正则性

本文首先将文［１］中的ＢＬＤ映射推广为弱（Ｌ１，Ｌ２）－ＢＬＤ映射，并证明了如下正则性结果：存在两个可积指数 Ｐ１＝Ｐ１（ｎ，Ｌ１，Ｌ２）＜ｎ＜ｑ１＝ｑ１（ｎ，Ｌ１，Ｌ２），使得对任意弱（Ｌ１，Ｌ２）－ＢＬＤ映射ｆ∈（Ω，Ｒｎ），都有ｆ∈（Ω，Ｒｎ），即ｆ为（Ｌ１，Ｌ２）－ＢＬＤ映射．     

Gd2O3:Eu纳米晶的制备及其光谱性质研究

以EDTA为络合剂，聚乙二醇为有机分散剂，用络合溶胶—凝胶法制备出Gd2O3:Eu纳米晶。用XRD，SEM，X—射线能量色散谱仪(EDS)，荧光分光光度计等分析手段对Gd2O3:Eu的纳米晶结构、形貌、组分的均匀性以及发光特性进行了研究。结果表明：EDTA—M凝胶仅在800℃焙烧即可得到颗粒细小、组分均匀、纯立方相的Gd2O3:Eu纳米晶，颗粒基本呈球形，粒径为30nm左右。对样品的激发光谱、发射光谱测定表明：Gd2O3:Eu纳米晶在269nm光激发下发红光，发射光谱谱峰在611nm，与体材料基本相同；激发光谱中电荷迁移带(CTB)明显红移，从体材料的255nm移至269nm，移动了约14nm；猝灭浓度从体材料的6％提高到8％。     

氩气介质阻挡放电的发光特性

本文使用水电极介质阻挡放电装置,采用光学方法测量了氩气介质阻挡放电的发光特性。发现在驱动电压处于一定的范围内时,放电处于丝极模式,在驱动电压的每半周期内,无论是放电的总光还是单个微通道的放电发光均只有一次脉冲,单个微放电的时间为2μs,而总放电时间为2.4μs,这表明在氩气的丝极模式中,各单丝产生与熄灭的时间极其接近,各个放电丝之间有着很好的时间相关性。最后将本文的结果与空气中介质阻挡放电丝极模式的发光特性相比较,空气放电在每半周内的总光信号由多个脉冲组成,而每一个脉冲对应多个放电丝,因而氩气中各个放电微通道之间的时间相关性远强于空气的情况。     

EACVD中用氢原子谱线测定电子平均能量

采用蒙特卡罗方法，对EACVD中氢原子的发射过程进行了模拟。给出了由氢原子谱线测定电子平均能量的方法，结果对EACVD生长金刚石薄膜过程中实时监测电子平均能量，进而可以有效地控制工艺条件，生长出高质量的金刚石薄膜具有重要意义。     

Reservoir operations optimization via fuzzy criterion decision processes

In this paper, we propose the treatment of complex reservoir operation problems via our newly developed tool of fuzzy criterion decision processes. This novel approach has been shown to be a more flexible and useful analysis tool especially when it is desirable to incorporate an expert’s knowledge into the decision models. Additionally, it has been demonstrated that this form of decision models will usually result in an optimal solution, which guarantees the highest satisfactory degree. We provide a practical exemplification procedure for the models presented as well as an application example.     

化学键合吸附剂的合成及吸附行为

在无定型硅胶上化学键合十八烷基三氯硅烷，键合率17%-20％，粒度5μm-10μm，以此键合的吸附剂可有效地吸附香烟烟气中的焦油、亚硝胺，吸附率分别为15%-18％和37%-43％，研究了化学键合吸附剂的粒度和加入量对吸附性能的影响。     

Residual analysis and parameter estimation of uncertain differential equations

Fuzzy Optimization and Decision Making - All existing methods to estimate unknown parameters in uncertain differential equations are based on difference scheme, and do not work when the time...     

对酞内酰胺苯甲酰氯柱前衍生反应HPLC分析痕量多胺

本文提出了一种快速、简便、灵敏检测痕量多胺的新方法。用对酞内酰胺苯甲酰氯同多胺进行柱前衍生反应,以反相高效液相色谱定量测定多胺含量。在4～500 pmol范围内有良好的定量线性关系,腐胺、精脒和精胺的检测限均为0.1 pmol。     

Uncertainty distribution and independence of uncertain processes

Uncertain process is a sequence of uncertain variables indexed by time. This paper presents a concept of uncertainty distribution for describing uncertain process. Some sufficient and necessary conditions are also proved for uncertainty distribution and inverse uncertainty distribution of uncertain process. Finally, this paper proposes an independence definition of uncertain processes and shows some mathematical properties of it.