Manipulating OH−-Mediated Anode-Cathode Cross-Communication Toward Long-Life Aqueous Zinc-Vanadium Batteries

The anode-cathode interplay is an important but rarely considered factor that initiates the degradation of aqueous zinc ion batteries (AZIBs). Herein, to address the limited cyclability issue of V-based AZIBs, Al₂(SO₄)₃ is proposed as decent electrolyte additive to manipulate OH⁻-mediated cross-communication between Zn anode and NaV₃O₈ ⋅ 1.5H₂O (NVO) cathode. The hydrolysis of Al³⁺ creates a pH≈0.9 strong acidic environment, which unexpectedly prolongs the anode lifespan from 200 to 1000 h. Such impressive improvement is assigned to the alleviation of interfacial OH⁻ accumulation by Al³⁺ adsorption and solid electrolyte interphase formation. Accordingly, the strongly acidified electrolyte, associated with the sedated crossover of anodic OH⁻ toward NVO, remarkably mitigate its undesired dissolution and phase transition. The interrupted OH⁻-mediated communication between the two electrodes endows Zn||NVO batteries with superb cycling stability, at both low and high scan rates.     

Experimental analysis and thermodynamic modelling of Nitroxynil solubility in pure solvent and binary solvent

Nitroxynil(NIT) is a commonly used anti-liver fluke drug for cattle and sheep, Its solubility is closely related to its preparation. In this work, the molar solubility of NIT in nine pure solvents (methanol, ethanol, 1,2-propanediolethyl, isopropanol, ethyl acetate, acetonitrile, n-butanol, phemethylol) and two kinds of binary mixtures with different ratio(ethanol + phemethylol; ethanol + acetonitrile) was determined by shake flask method over the temperature from 278.15 ～ 323.15 K at atmosphere pressure. Results show that the solubility of NIT in all tested solvents was increased with raised temperature. In mono-solvents, the mole fraction solubility of NIT was highest in phemethylol and the solubility order is: phemethylol > acetonitrile > ethyl acetate > methanol > n-butanol > ethanol > 1,2-propanediolethyl > isopropanol > water. In binary solvents, the mole fraction solubility increased with increasing ratio of phemethylol/acetonitrile. In mono-solvents, the modified Apelblat equation, λh equation, Van't Hoff model were applied to correlate the solubility data. In binary solvents, the modified Apelblat equation, λh equation, GSM model and Jouyban-Acree model were to correlate the solubility data. Solubility order of NIT in nine pure solvent and two binary solvent systems were analysed by using the Hansen solubility parameter (HSP). Activity coefficient was to access the solute–solvent molecular interactions. In addition, the dissolution of NIT is an endothermic and entropy-friendly process, since thermodynamic parameters such as enthalpy, entropy, and apparent standard Gibbs free energy are all greater than zero. The results will supply some essential data on recrystallization process, purification and formulation development of NIT in pharmaceutical applications.     

Preparation of Alum-borneol-PVP Drug-loaded Fibers by Electrospinning

The alum-borneol nanoemulsion(ABN), which combines the mineral medicine alum and the botanical medicine borneol, has been applied for approximately 40 years in the clinical treatment of burns, scalds, radiation dermatitis and shingles, and has a good curative effect. However, the current formula and dosage form of ABN pose problems of low borneol content and ease of precipitation, which greatly affects the efficacy of the drug. In this study, polyvinylpyrrolidone(PVP) was selected as a carrier mixed with different proportions of alum and borneol to produce alum-borneol-PVP fibers(ABPF) by electrospinning. The results showed that the stable system with good drug dispersion was 2:3(alum:borneol). The dissolution content of borneol from the ABPF was about 80% in 4 h, which was much higher than that of the alum-borneol liquid(ABL) and ABN. The ABPF membrane showed a more significant inhibitory effect on Staphylococcus aureus than the ABL and ABN. The composite fiber markedly increased the drug content of borneol, which was 800 times of that in ABN. The fiber had a higher solubility than the nanoemulsion in vitro, which is of great importance for the de-velopment of new forms for the clinical application of alum and borneol.     

A novel method for the determination of diffusion coefficients in amorphous poly(3-hydroxybutyrate)

A novel approach is proposed for the determination of the diffusion coefficient of certain drugs in amorphous poly(hydroxybutyrate) (PHB), which can be a reliable alternative to the conventional permeation based measurements. The method requires the preparation of PHB films with various concentrations of the drug and if the latter absorbs in the visible wavelength range, its concentration gradient in the polymer film as well as the time dependence of the latter can be analyzed quantitatively by following changes in color. Color can be converted into concentration with the help of adequate calibration and thus the dependence of additive concentration on space (x) and time (t), i.e. the c(x,t) function, can be determined relatively easily. The fitting of the numerical solution of Fick's second law onto the measured values provides directly the targeted diffusion coefficient. The comparison of diffusion coefficients obtained by the proposed approach to values published in the literature proved that the new method provides reliable results and requires reasonable time and effort at the same time.     

Swelling of metallic surfaces irradiated by helium ions

At doses close to threshold for exfoliation or bubble formation the surfaces have been investigated by SEM and, after isolation of surface layers, also by RBS. Swelling as a function of energy and material has been determined. The data are interpreted in the form of volume occupied by a helium atom. We find an indication for a volume decrease with increasing energy. A special example of blister formation is also discussed, where we find evidence for a non-uniform fracture plane.     

光纤过程检测硫酸亚铁缓释片释放度

建立光纤药物溶出度实时测定仪（FODT）在线监测硫酸亚铁溶出度测定的新方法.研究发现通过络合反应检测Fe2＋是可行的,FODT测定硫酸亚铁缓释片释放度与AAS测定结果无统计学意义.利用FODT过程检测硫酸亚铁缓释片释放度,全面直观地反映了药品的释放过程和内在质量,较经典方法能提供更多信息,测定过程简便自动,测定结果准确可靠.     

Intensified dissolution of uranium from graphite substrate using ultrasound

Decontamination of graphite structural elements and recovery of uranium is crucial for waste minimization and recycle of nuclear fuel elements. Feasibility of intensified dissolution of uranium-impregnated graphite substrate using ultrasound has been studied with objective of establishing the effect of operating parameters and the kinetics of sonocatalytic dissolution of uranium in nitric acid. The effect of operating frequency and acoustic intensity as well as the acid concentration and temperature on the dissolution of metal has been elucidated. It was observed that at lower acid concentrations (6 M–8 M), the dissolution ratio increases by 15% on increasing the bath temperature from 45 to 70 °C. At higher acid concentration (>10 M), the increase was only around 5–7% for a similar change in temperature. With 12 M HNO₃, pitting was also observed on the graphite surface along with erosion due to high local reaction rates in the presence of ultrasound. For higher frequency of applied ultrasound, lower dissolution rate of uranium was observed though it also leads to high rates of erosion of the substrate. It was thus established that suitable optimization of frequency is required based on the nature of the substrate and the choice of recycling it. The dissolution rate was also demonstrated to increase with acoustic intensity till it reaches to the maximum at the observed optimum (1.2 W/cm² at 33 kHz). Comparison with silent conditions revealed that enhanced rate was obtained due to the use of ultrasound under optimum conditions. The work has demonstrated the effective application of ultrasound for intensifying the extent of dissolution of metal.     

离子液体1-乙基-3-甲基咪唑醋酸盐的制备及用于纤维素溶解纺丝的研究进展

离子液体1-乙基-3-甲基咪唑醋酸盐（[EMIM3Ac）可以溶解天然高分子等许多聚合物,尤其对于纤维素具有较强的溶解能力,且溶解过程基本不造成纤维素降解,故可以作为纤维素的有效溶剂,用于纤维素的溶解加工。与其它溶剂相比,[EMIM]Ac具有使用安全、不污染环境、易回收循环利用等优势,故在纤维素溶解、纺丝方面具有广阔的应...     

Modified MCM-41 as a drug delivery system for acetylsalicylic acid

The modification of prepared MCM-41 by different groups (amino, chloro and oxo) was studied. Prepared materials were treated by acetylsalicylic acid and hybrid materials were characterized, compared from the point of view of immobilized amount of active substance. The highest amount of acetylsalicylic acid was detected using methyl-tert- butyl ether as a solvent and MCM-41 without modification after 1 h (0.35 g per 1 g of the support) or MCM modified by amino group after 5 h (0.37 g per 1 g of the support) as a support. Using amino modified MCM, the longer treatment by acetylsalicylic acid converged to the equilibrium and after 24 h the immobilized amount was 0.3 g per 1 g. A dissolution in vitro study was carried out, comparing the stability of formed interactions. The slowest dissolution was detected using non-modified MCM-41 and oxo modified material.     

Fabrication and evaluation of self-nanoemulsifying oil formulations (SNEOFs) of Efavirenz

The current work designed to fabricate and evaluate self-nanoemulsfying oil formulations (SNEOFs) of Efavirenz (Efz) a BCS class II drug with the objective of increasing its solubility as well as in vitro dissolution rate for improvisation of bioavailability. Preliminary screening of drug which includes solubility, emulsifying ability and ternary phase diagrams was carried out to fabricate SNEOFs. Various thermodynamic stability studies were exercised to find out the stable SNEOFs. Robustness to dilution, % transmittance and turbidity, droplet size analysis, TEM study, cloud point measurement, viscosity and refractive index were executed on the stable SNEOFs to characterize the delivery system. FTIR study was adopted for the compatibility of the additives with the drug. In vitro release profiles of SNEOFs compared with Efz, percent dissolution efficiency (DE) and dissolution half-life (t₅₀) were evaluated. A low percent DE (30.12%) and high t₅₀ was obtained for Efz whereas all SNEOFs showed a DE of greater than 78.48% and less than 9?min t₅₀. The optimized SNEOFs (F8) demonstrated a significant (p?<?0.05) increase in bioavailability over Efz. Thus the designed optimized delivery system could be instrumental in increasing aqueous solubility of Efz, improving its release performance and enhancement of oral absorption.