Analysis of dissolution test sample solutions by high speed capillary electrophoresis

Summary The quantitative use of high speed capillary electrophoresis (HSCE) is examined by applying high voltages across short capillaries. Acceptable performance in terms of injection precision and migration times were achieved within 1–2 minute analysis times. HSCE was used for the novel CE application of dissolution test sample solution analysis. The results generated by HSCE compared well with those generated using validated on-line UV absorbance measurements. It is concluded that HSCE is a viable alternative and supplement to standard analytical methods employed in dissolution test analysis.     

微波增压溶样-石墨炉原子吸收光谱法同时测定植物性样品中微量铅镉

使用微波增压溶样法，将样品用HNO3—HClO4溶解后，用石墨炉原子吸收光谱法同时测定植物性样品中铅和镉。以磷酸二氢铵—硝酸镁作为基体改进剂，可使灰化温度大大提高，克服了基体的干扰。铅和镉的回收率分别为95．3％—104．8％和96．2％—105．5％，RSD分别为4．8％-7．2％和4．3％-7．6％。     

Determination of rimantadine in pharmaceutical preparations by capillary zone electrophoresis with indirect detection or after derivatization

Summary Rimantadine is synthetic analog of amantadine; both are antiviral agents used for prophylaxis and treatment of influenza A. A capillary zone electrophoretic (CZE) procedure for the determination of rimantadine has been developed. As the direct determination of rimantadine is poorly sensitive because the compound is almost transparent in the UV/Vis range, several indirect methods were studied. Two were found to be the particularly useful: (a) indirect detection using 5 mM 4-methylbenzylamine in 1:4 methanol-water as absorbing background electrolyte, with detection at 210 nm, and (b) derivatization of rimantadine with 1,2-naphthoquinone-4-sulfonic acid in alkaline medium and subsequent determination of the derivative by CZE (40 mM tetraborate, pH 9.2, detection at 280 nm). Uncoated capillary tubing, 44 cm length ×75 μM i.d., was used for both determinations. The detection limits were 0.1 and 2 ppm for methods a and b, respectively. The methods were used to determine rimantadine in pharmaceutical products and for dissolution testing of Flumadin^? tablets.     

新型聚芳醚酮的研究进展

文章主要介绍了聚芳醚酮的合成路线与性质,讨论了对其改性的方向和进展,如共聚共混改性,在聚芳醚酮的主链中引入大的侧基破坏其规整性,以及研制含氟的新型聚合物。     

Simultaneous determination of solubility, dissolution and dilution enthalpies of a substance from a single calorimetric experiment

The thermodynamics of dissolution in water of a set of substances has been studied calorimetrically. The examined substances were: potassium chloride, (glycyl-glycyl)diketopiperazine, (alanyl-alanyl)diketopiperazine, (leucyl-glycyl)diketopiperazine. They were chosen on the basis of their solubilities, going from a highly soluble electrolyte to the sparingly soluble diketopiperazines. It is shown that, using a commercially available calorimeter, it is possible to perform in a single calorimetric experiment the simultaneous determination of all thermodynamic parameters characterizing dissolution of a substance in a given solvent, i.e. solubility, dissolution enthalpy and dilution enthalpy. The solubility values in water obtained through the proposed method are in good agreement with those reported in the literature and obtained by other techniques.     

Application of a chemometric method for simultaneous determination of acetaminophen and diclofenac in content-uniformity and drug-dissolution studies

A new, repeatable, and rapid method has been developed for resolution of binary mixtures of acetaminophen and diclofenac with minimum sample pretreatment and without separation of the analytes. The method, based on the PLS1 processing of absorbance data in the UV region, was successfully used for quantification of the drug content of three tablet preparations. The results obtained were in good agreement with HPLC recovery data. The method also enabled determination of drug-dissolution profiles of these commercial tablets, by simultaneous determination of both analytes during the dissolution test.     

Modified MCM-41 as a drug delivery system for acetylsalicylic acid

The modification of prepared MCM-41 by different groups (amino, chloro and oxo) was studied. Prepared materials were treated by acetylsalicylic acid and hybrid materials were characterized, compared from the point of view of immobilized amount of active substance. The highest amount of acetylsalicylic acid was detected using methyl-tert- butyl ether as a solvent and MCM-41 without modification after 1 h (0.35 g per 1 g of the support) or MCM modified by amino group after 5 h (0.37 g per 1 g of the support) as a support. Using amino modified MCM, the longer treatment by acetylsalicylic acid converged to the equilibrium and after 24 h the immobilized amount was 0.3 g per 1 g. A dissolution in vitro study was carried out, comparing the stability of formed interactions. The slowest dissolution was detected using non-modified MCM-41 and oxo modified material.     

Preparation of Alum-borneol-PVP Drug-loaded Fibers by Electrospinning

The alum-borneol nanoemulsion(ABN), which combines the mineral medicine alum and the botanical medicine borneol, has been applied for approximately 40 years in the clinical treatment of burns, scalds, radiation dermatitis and shingles, and has a good curative effect. However, the current formula and dosage form of ABN pose problems of low borneol content and ease of precipitation, which greatly affects the efficacy of the drug. In this study, polyvinylpyrrolidone(PVP) was selected as a carrier mixed with different proportions of alum and borneol to produce alum-borneol-PVP fibers(ABPF) by electrospinning. The results showed that the stable system with good drug dispersion was 2:3(alum:borneol). The dissolution content of borneol from the ABPF was about 80% in 4 h, which was much higher than that of the alum-borneol liquid(ABL) and ABN. The ABPF membrane showed a more significant inhibitory effect on Staphylococcus aureus than the ABL and ABN. The composite fiber markedly increased the drug content of borneol, which was 800 times of that in ABN. The fiber had a higher solubility than the nanoemulsion in vitro, which is of great importance for the de-velopment of new forms for the clinical application of alum and borneol.     

光纤过程检测硫酸亚铁缓释片释放度

建立光纤药物溶出度实时测定仪（FODT）在线监测硫酸亚铁溶出度测定的新方法.研究发现通过络合反应检测Fe2＋是可行的,FODT测定硫酸亚铁缓释片释放度与AAS测定结果无统计学意义.利用FODT过程检测硫酸亚铁缓释片释放度,全面直观地反映了药品的释放过程和内在质量,较经典方法能提供更多信息,测定过程简便自动,测定结果准确可靠.     

The transformation of ferrihydrite in the presence of trace Fe(II): The effect of the anionic media

The transformation from ferrihydrite to various iron oxides and iron oxyhydroxides has been given much attention not only in environmental science and geochemistry but also in biology and material science. This laboratory study attempted to investigate Fe(II)-induced transformation of ferrihydrite in sulfate-rich medium. The results indicate that the transformation in sulfate-rich medium differs from that in Cl⁻ medium in the species, the amount and the morphology of products and transformation rate. Lepidocrocite is a main ingredient in the product in Cl⁻ medium at room temperature (RT), while goethite is the only product in SO₄²⁻ medium at RT. Goethite particles obtained in Cl⁻ medium are star-like but rod-like in SO₄²⁻ medium. The transformation rate in the latter medium is obviously slower than that in the former medium. The formation of lepidocrocite depends on both the ionic strength of the system and the dissolution rate of ferrihydrite.