Towards Fabrication of Atomic Dopant Wires via Monolayer Doping Patterned by Resist-Free Lithography

Fabrication of atomic dopant wires at large scale is challenging.We explored the feasibility to fabricate atomic dopant wires by nano-patterning self-assembled dopant carrying molecular monolayers via a resist-free lithographic approach.The resist-free lithography is to use electron beam exposure to decompose hydrocarbon contaminants in vacuum chamber into amorphous carbon that serves as an etching mask for nanopatterning the phosphorus-bearing monolayers.Dopant wires were fabricated in silicon by patterning diethyl vinylphosphonate monolayers into lines with a width ranging from 1 μm down to 8 nm.The dopants were subsequently driven into silicon to form dopant wires by rapid thermal annealing.Electrical measurements show a linear correlation between wire width and conductance,indicating the success of the monolayer patterning process at nanoscale.The dopant wires can be potentially scaled down to atomic scale if the dopant thermal diffusion can be mitigated.     

具有调和曲率与有限$L^p$曲率的完备流形

Let(M~n, g)(n ≥ 3) be an n-dimensional complete Riemannian manifold with harmonic curvature and positive Yamabe constant. Denote by R and R?m the scalar curvature and the trace-free Riemannian curvature tensor of M, respectively. The main result of this paper states that R?m goes to zero uniformly at infinity if for p ≥ n, the L~p-norm of R?m is finite.As applications, we prove that(M~n, g) is compact if the L~p-norm of R?m is finite and R is positive, and(M~n, g) is scalar flat if(M~n, g) is a complete noncompact manifold with nonnegative scalar curvature and finite L~p-norm of R?m. We prove that(M~n, g) is isometric to a spherical space form if for p ≥n/2, the L~p-norm of R?m is sufficiently small and R is positive.In particular, we prove that(M~n, g) is isometric to a spherical space form if for p ≥ n, R is positive and the L~p-norm of R?m is pinched in [0, C), where C is an explicit positive constant depending only on n, p, R and the Yamabe constant.     

不同载荷及转速条件下MoS2涂层的摩擦磨损性能研究

为获得二硫化钼(MoS₂)涂层在聚变堆部件表面使用条件下的摩擦磨损特性,采用单极性脉冲磁控溅射技术在铁铬镍基高温合金A286上制备了厚度为2μm的MoS₂涂层,并针对MoS₂涂层在不同载荷及转速条件下的摩擦学性能展开了研究。经验证,沉积的MoS₂涂层结晶度较好,沿(002)面择优取向;随测试转速的增加,摩擦系数逐渐减小,在转速为50r·min^-1时,摩擦系数平均值为0.0722;在转速固定时,摩擦系数随测试载荷的增加先减小后增大,当载荷为7N时达到最小平均值0.0763。     

基于菌紫质F态的永久光存储研究

在线偏振飞秒激光激发下, 菌紫质通过双光子光化学反应可以生成具有永久光致各向异性的蓝移产物F₅₄₀态. 基于F₅₄₀态的永久光致各向异性, 通过调控飞秒激光空间光场分布, 可以在菌紫质薄膜中实现永久光信息存储. 本文使用纯相位型空间光调制器调制飞秒激光光场, 在物镜焦平面上生成光学点阵图案, 可以将信息快速记录在菌紫质薄膜中. 同时, 通过改变入射激光偏振方向, 可以实现偏振复用光存储, 这在高密度光存储和数据加密领域具有潜在应用.     

X箍缩三维数值模拟

利用FOI-PERFECT程序对X箍缩进行了3D数值模拟研究,给出了X箍缩的物理图像和动力学过程,探讨了Z箍缩中出现磁重联的可能性,并指出如果双丝Z箍缩中能够出现磁重联,那么X箍缩是更有利于磁重联出现的位形,并且,X箍缩中出现多重X射线暴的一个可能原因是z轴上多个位置出现磁重联。     

超声波辅助萃取－高效液相色谱法测定食品中碱性玫瑰精

建立超声波辅助萃取—高效液相色谱法测定含辣椒食品中非法添加剂碱性玫瑰精的方法.样品经均质,辣椒面样品、辣椒油样品、红油豆瓣酱样品分别用乙腈:水=7:3(V/V)溶液、正己烷:50％乙醇=1:2(V/V)溶液、无水乙醇经超声波辅助萃取后,用高效液相色谱仪测定碱性玫瑰精.线性范围0.026～26 μg/mL,相关系数0.9...     

测定辣椒食品中碱性玫瑰精前处理条件的优化

采用正交设计法对三类辣椒食品中碱性玫瑰精超声波萃取条件进行优选,考察影响碱性玫瑰精萃取率的四个主要因素.各因素对碱性玫瑰精萃取率的影响次序为:萃取溶剂组成(A)、萃取溶剂用量(B)、超声波萃取温度(D)、超声波萃取时间(C).辣椒面样品最优萃取条件为:萃取溶剂15 mL乙腈∶水=7∶3(V/V),于55℃下超声萃取25...     

杯冠衍生物BEHBCalixC6对铯离子萃取性能的研究

本文以杯冠BEHBCalixC6为萃取剂,二氯甲烷为稀释剂,通过液液萃取,研究了BEHBCalixC6对苦味酸铯的萃取性能.研究表明,随着主、客体摩尔比的增加,萃取率增大.在摩尔比50:1时,萃取率可以达到77%以上.考察了测量参比溶液、预饱和两相稀释剂、稀释剂种类和溶液中Na+浓度等因素对萃取率的影响.