Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane induced by N-heterocyclic carbene and thiourea

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane catalyzed by thiazolium A has been developed. The reaction rate and efficiency are profoundly impacted by the presence of thiourea B. The reaction affords moderate to good yields of the Stetter product. Some factors influencing yield were discussed.     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Study of water uptake in poly(ether ether ketone) irradiated by MeV O+ and Au+ ions

Poly(ether ether ketone) (PEEK) was irradiated with 4?MeV O⁺ and 5 and 10?MeV Au⁺ ions to the fluences from 10¹² to 10^14?cm^?2 and then treated in 5 M/l water solution of LiCl for one month at room temperature. After drying and removal of LiCl surface contamination, the depth distribution of LiCl embeded in PEEK was measured by the neutron depth profilig method (NDP) sensitive to ⁶Li isotope. Embeded LiCl is believed to map distribution of water diffusing into PEEK interior. The results show that the PEEK irradiated to the fluences above 1.10¹³cm^?2 is prone to water penetration to the depths of few microns. On the pristine PEEK and that irradiated to lower ion fluences only a surface Li contamination is observed.     

Sulfonated poly(ether ether ketone) composite membranes based on amino-modified halloysite nanotubes that effectively immobilize phosphotungstic acid

In this work, we prepared amino-modified halloysite nanotubes (PEI-DHNTs) via the co-deposition of self-polymerized dopamine and polyethylenimine (PEI) on the surface of nanotubes, which was confirmed by X-ray photoelectron spectroscopy (XPS) and Thermogravimetric analysis (TGA). A series of composite proton exchange membranes (PEMs) were prepared by incorporating PEI-DHNTs and phosphotungstic acid (HPW) into sulfonated poly(ether ether ketone) (SPEEK). It was found that both PEI-DHNTs and HPW were well dispersed in the polymer matrix, exhibiting excellent filler-matrix compatibility. The composite membranes demonstrated enhanced proton conductivity, reaching as high as 0.078 S cm⁻¹ with 33.3 wt.% HPW loading, which was ~90% higher than that of SPEEK control membrane. Such improvement was mainly attributed to the strong acid–base pairs formed by PEI-DHNT with both SPEEK and HPW, which shortened proton hopping distance and created more continuous proton conduction pathways. Furthermore, the membrane conductivity remained almost constant after 1 year's immersion in liquid water, indicating the successful immobilization of HPW in the composite membranes.     

Easy To Synthesize,Robust Organo‐osmium Asymmetric Transfer Hydrogenation Catalysts

Asymmetric transfer hydrogenation (ATH) is an important process in organic synthesis for which the Noyori‐type Ru^II catalysts [(arene)Ru(Tsdiamine)] are now well established and widely used. We now demonstrate for the first time the catalytic activity of the osmium analogues. X‐ray crystal structures of the 16‐electron Os^II catalysts are almost identical to those of Ru^II. Intriguingly the precursor complex was isolated as a dichlorido complex with a monodentate amine ligand. The Os^II catalysts are readily synthesised (within 1 h) and exhibit excellent enantioselectivity in ATH reactions of ketones.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

一种考虑聚醚醚酮（PEEK）不同力学状态的本构模型

聚醚醚酮（简称PEEK）以其优良的性能而广泛应用于高端机械、 核工程和航空等科技领域.为了描述其在应变、应变率和温度3种因素作用下的力学行为,依据PEEK在不同温度下呈现的3种力学状态,在著名的JC(Johnson Cook)本构模型的基础上,提出了针对高分子不同力学状态的分段JC本构模型.与传统JC模型及文献中改进JC模型相比,提出的分段JC模型能够更精确地表征PEEK在中高温下的力学行为,为PEEK在复合材料中的应用和分析奠定了理论基础.     

Double Michael addition of nitromethane to divinyl ketones: A remarkably positive effect of additive

An efficient double Michael addition of nitromethane to divinyl ketones was established in good to high yields (75–99%). A wide range of cyclohexanones were obtained with excellent diastereocontrol (up to >20:1 dr) and enantioinduction (91–99% ee) in a one-pot fashion. The involvement of basic additive significantly enhanced the reactivity of this cascade sequence.     

手性炔丙醇的不对称催化合成研究进展

手性炔丙醇是一种重要中间体化合物,作为合成多种光学活性化合物的重要合成前体受到学者们广泛关注。目前通过酮的不对称催化反应合成手性炔丙醇的研究开发具有极大发展前景,因此本文围绕酮类化合物的不对称催化反应来进行综述,结合相关反应最新研究进展,全面总结并分类了不对称催化还原、催化不对称加成等反应类型,介绍了合成不同结构手性炔丙醇的新思路,并对酮的不对称催化反应在未来能成为工业化重要生产途径作出展望。     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.