Robust and High-Wettability Pristine Poly(ether ether ketone)Nanofiber Separator for Heat-Resistant and Safe Lithium-Ion Battery

Separator is a pivotal component of lithium-ion batteries(LIBs) and determines the electrochemical performance and safety. However,with the increase in energy density and application scenarios, commercial polyolefin separators are increasingly unable to undertake heavy responsibility of battery safety protection. Herein, a new kind of nanofiber separator based on poly(ether ether ketone)(PEEK) with excellent thermal stability, self-extinguishing, and superior electrochemical properties is report...     

ZIF-67@Cellulose nanofiber hybrid membrane with controlled porosity for use as Li-ion battery separator

Zeolitic imidazolate framework-67(ZIF-67) was synthesized on the surface of cellulose nanofibers(CNFs)in methonal to address the problems of unhomogeneous pore size and pore distribution of pure CNF membrane.A combination of Energy Dispersive X-Ray Spectroscopy(EDS),X-ray photoelectron spectroscopy(XPS) and X-ray powder diffraction(XRD) patterns were used to determine the successful synthesis of ZIF-67@CNFs.The size of the ZIF-67 particles and pore size of the ZIF-67@CNF membrane were50-200 nm and 150-350 nm, respectively.The prepared ZIF-67@CNF membrane exhibited excellent thermal stability,lower thermal shrinkage and high surface wettability.The discharge capacity retention of the Li-ion batteries(LIBs) made with ZIF-67@CNF,glass fiber(GF),CNF and commercial polymer membranes after 100 th cycle at 0.5 C rate were 88.41%,86.22%,83.27%,and 81.03%,respectively.LIBs with ZIF-67@CNF membrane exhibited a better rate capability than these with other membranes.No damage of porous structure or peel-off of ZIF-67 was observed in the SEM images of ZIF-67@CNF membrane after100 th cycle.The improved cycling performance,rate capability,and good electrochemical stability implied that ZIF-67@CNFs membrane can be considered as a good alternative LIB separator.     

Effect of silica nanoparticles/poly（vinylidene fluoride-hexafluoropropylene） coated layers on the performance of polypropylene separator for lithium-ion batteries

In an effort to reduce thermal shrinkage and improve electrochemical performance of porous polypropylene （PP） separators for lithium-ion batteries, a new composite separator is developed by introducing ceramic coated layers on both sides of PP separator through a dip-coating process. The coated layers are comprised of heat-resistant and hydrophilic silica nanoparticles and polyvinylidene fluoride-hexafluoropropylene （PVDF-HFP） binders. Highly porous honeycomb structure is formed and the thickness of the layer is only about 700 nm. In comparison to the pristine PP separator, the composite separator shows significant reduction in thermal shrinkage and improvement in liquid electrolyte uptake and ionic conduction, which play an important role in improving cell performance such as discharge capacity, C-rate capability, cycle performance and coulombic efficiency.     

“Polymer-in-ceramic” based poly(ε-caprolactone)/ceramic composite electrolyte for all-solid-state batteries

Inspired by the concept of "polymer-in-ceramic",a composite poly(ε-caprolactone)(PCL)/ceramic containing LiTFSI is prepared and investigated as a solid electrolyte for all-solid-state batteries.The composite with the optimum concentration of 45 wt% LiTFSI and 75 wt% Li1.5Al0.5Ge1.5(PO4)3(LAGP,NASICON-type structure) exhibits a high ionic conductivity(σi=0.17 mS cm-1) at 30℃,a transference number of 0.30,and is stable up to 5.0 V.The composite electrolyte is a flexible and self-standing membrane.Solid-state LiFePO4//Li batteries with this composite electrolyte demonstrate excellent cycling stability with high discharge capacity of 157 mA h g-1,high capacity retention of 96% and coulombic efficiency of 98.5% after 130 cycles at 30℃ and 0.1 C rate.These electrochemical properties are better than other PCL-based allsolid-lithium batteries,and validate the concept of "polymer-in-ceramic" by avoiding the drawback of lower conductivity in prior "polymer-in-ceramic" electrolyte at high concentration of the ceramic.     

Preparation of composite poly（ether block amide） membrane for CO2 capture

In this study, a poly（ether block amide） （Pebax 1657） composite membrane applied for COa capture was prepared by coating Pebax 1657 solution on polyacrylonitrile （PAN） ultrafiltration membrane. Ethanol/water mixture was used as the solvent of Pebax and the effects of ethanol/water mass ratios and Pebax concentration on the permeation properties of composite membrane were studied. To enhance the com- posite membrane permeance, the gutter layer, made from reactive amino silicone crosslinking with potydimethylsiloxane （PDMS）, was de- signed. The influence of crosslinldng degree of the gutter layer on membrane performance was investigated. As a result, a Pebardamino- PDMS/PAN multilayer membrane with hexane resistance was developed, showing CO2 permeance of 350 GPU and CO2/N2 selectivity over 50. The blend of polyethylene glycol dimethyl ether （PEG-DME） with Pebax as coating material was studied to further improve the membrane performance. After being combined with PEG-DME additive, CO2 permeance of the final Pebax-PEG-DME/amino-PDMS/PAN composite membrane reached 400 GPU above with CO2/Na selectivity over 65.     

Magnetron sputtering deposition of silicon nitride on polyimide separator for high-temperature lithium-ion batteries

To date,lithium-ion batteries are becoming increasingly significant in the application of portable devices and electrical vehicles,and revolutionary progress in theoretical research and industrial application has been achieved.However,the commercial polyolefin separators with unsatisfying electrolytes affinity and poor thermal stability have extremely restricted the further application of lithium-ion batteries,especially in the high-temperature fields.In this work,magnetron sputtering deposition technique is employed to modify the commercial polyimide separator by coating silicon nitride on both sides.Magnetron sputtering deposition modified polyimide(MSD-PI)composite separator shows high thermal stability and ionic conductivity.More importantly,compared with the cells using Celgard separator,the cells with MSD-PI separator exhibit superior electrochemical performance,especially long-term cycle performance under high temperature environment,owing to the high thermal conductivity of surface Si3 N4 particles.Hence,lithium-ion batteries with MSD-PI separator are capable of improving thermal safety and capacity retention,which demonstrates that magnetron sputtering deposition technique could be regarded as a promising strategy to develop advanced organic/inorganic composite separators for high-temperature lithium-ion batteries.     

Polymer-free electrospun separator film comprising silica nanofibers and alumina nanoparticles for Li-ion full cell

A separator film for high-performance Li-ion batteries was prepared by electrospinning. The film had a hybrid morphology of silica nanofibers(SNFs) and alumina nanoparticles(ANPs), with a smooth surface, polymer-free composition, high porosity(79%), high electrolyte uptake(876%), and excellent thermal stability. Contact angle measurements demonstrated the better immersion capability of the SNF-ANP separator film for commercial liquid electrolytes than a commercial CELGARD 2500 separator film. Moreover,compared to the commercial CELGARD 2500 separator, the ionic conductivity of the SNF-ANP separator film was nearly three times higher, the bulk resistance was lower at elevated temperature(120 ℃), the interfacial resistance with lithium metal was lower, and the electrochemical window was wider. Full cells were fabricated to determine the cell performance at room temperature. The specific capacity of the full cell with the SNF-ANP separator film was 165 mAh g~(-1); the cell was stable for 100 charge/discharge cycles and exhibited a capacity retention of 99.9%. Notably, the electrospun SNF-ANP separator film can be safely used in Li-ion or Li-S rechargeable batteries.     

Synthesis of Poly(phthalazinone ether ketone) Containing Sodium Sulfonate Groups via Direct Polymerization

Poly (aryl ether ketone)s are a category of high performance engineering plastics which have outstanding thermal, physical and mechanical properties. Poly(aryl ether ketone) with sulfonic groups have received extensive attention for their potential usage as high performance gas dehumidification and ion exchange membrane materials1,2,3. Poly (phthalazinone ether ketone)4, one of poly(aryl ether ketone), shows excellent comprehensive properties and outstanding thermal stability, whose glass tra…     

Synthesis and Characterization of Fluorine-containing Poly（ether ether ketone）s

<正>Poly(ether ether ketone)s(PEEK) are a class of high performance engineering thermoplastics known for their excellent thermal,mechanical,and electrical properties.This class of advanced materials has currently received considerable attention for potential application in aerospace,electronics,automobile and     

High-performance all-solid-state polymer electrolyte with fast conductivity pathway formed by hierarchical structure polyamide 6 nanofiber for lithium metal battery

The utilization of all-solid-state electrolytes is considered to be an effective way to enhance the safety performance of lithium metal batteries.However,the low ionic conductivity and poor interface compatibility greatly restrict the development of all-solid-state battery.In this study,a composite electrolyte combining the electrospun polyamide 6(PA6)nanofiber membrane with hierarchical structure and the polyethylene oxide(PEO)polymer is investigated.The introduction of PA6 nanofiber membrane can effectively reduce the crystallinity of the polymer,so that the ionic conductivity of the electrolyte can be enhanced.Moreover,it is found that the presence of finely branched fibers in the hierarchical structure PA6 membrane allows the polar functional groups(C=O and N-H bonds)to be fully exposed,which provides sufficient functional sites for lithium ion transport and helps to regulate the uniform deposition of lithium metal.Moreover,the hierarchical structure can enhance the mechanical strength(9.2 MPa)of the electrolyte,thereby effectively improving the safety and cycle stability of the battery.The prepared Li/Li symmetric battery can be stably cycled for 1500 h under 0.3 mA cm^-2 and 60℃.This study demonstrates that the prepared electrolyte has excellent application prospects in the next generation all-solid-state lithium metal batteries.     

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

All-solid-state Li metal battery has been regarded as a promising battery technology due to its high energy density based on the high capacity of lithium metal anode and high safety based on the all solid state electrolyte without inflammable solvent.However,challenges still exist mainly in the poor contact and unstable interface between electrolyte and electrodes.Herein,we demonstrate an asymmetric design of the composite polymer electrolyte with two different layers to overcome the interface issues at both the cathode and the anode side simultaneously.At the cathode side,the polypropylene carbonate layer has enough viscosity and flexibility to reduce the inter-facial resistance,while at the Li anode side,the polyethylene oxide layer modified with hexagonal boron nitride has high mechanical strength to suppress the Li dendrite growth.Owing to the synergetic effect between different components,the asprepared double layer composite polymer electrolyte demonstrates a large electrochemical window of5.17 V,a high ionic conductivity of 6.1×10~(-4) S/cm,and a transfe rence number of 0.56,featuring excellent ion transport kinetics and good chemical stability.All-solid-state Li metal battery assembled with LiFePO_4 cathode and Li anode delivers a high capacity of 150.9 mAh/g at 25℃ and 0.1 C-rate,showing great potential for practical applications.     

Improving the performance of all-solid-state supercapacitors by modifying ionic liquid gel electrolytes with graphene nanosheets prepared by arc-discharge

Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.     

Preparation and Properties of Hybrid Silane-crosslinked Sulfonated Poly(aryl ether ketone)s as Proton Exchange Membranes

A series of novel organic-inorganic hybrid proton-conducting electrolyte membranes with silane-crosslinked sulfonated poly(aryl ether ketone)(SC-SPAEK) networks was prepared via a simple procedure that includes solution casting and acid treatment. The organosilicon pendants of the silane-grafted SPAEK, which were expected to serve as coupling and crosslinking agents, were found to play a key role in the homogenous dispersion of inorganic particles and improved the performance of hybrid membranes. The hybrid membranes exhibited enhanced proton conductivity, and SC-SPAEK/TiO2-4 showed an extremely high proton conductivity of 0.1472 S/cm at 100℃. The crosslinked hybrid membranes also demonstrated good chemical resistance, oxidative stability, and mechanical properties. The crosslinked hybrid membranes with excellent comprehensive performance may be a promising material for proton exchange membrane fuel cells.     

Reinforced polysulfide barrier by g-C_3N_4/CNT composite towards superior lithium-sulfur batteries

The notorious shuttle effect has long been obstructing lithium-sulfur(Li-S) batteries from yielding the expected high energy density and long lifespan.Herein,we develop a multifunctional polysulfide barrier reinforced by the graphitic carbon nitride/carbon nanotube(g-C_3 N_4/CNT) composite toward inhibited shuttling behavior and improved battery performance.The obtained g-C_3 N_4 delivers a unique spongelike architecture with massive ion transfer pathways and fully exposed active interfaces,while the abundant C-N heteroatomic structures impose strong chemical immobilization toward lithium polysulfides.Combined with the highly conductive agent,the g-C_3 N_4/CNT reinforced separator is endowed with great capability of confining and reutilizing the active sulfur within the cathode,thus contributing to an efficient and stable sulfur electrochemistry.Benefiting from these synergistic attributes,Li-S cells based on g-C_3 N_4/CNT separator exhibit an excellent cyclability with a minimum decay rate of 0.03% per cycle over 500 cycles and decent rate capability up to 2 C.Moreover,a high areal capacity of 7.69 mAh cm^-2can be achieved under a raised sulfur loading up to 10.1 mg cm^-2.demonstrating a facile and efficient pathway toward superior Li-S batteries.     

Rolling up MXene sheets into scrolls to promote their anode performance in lithium-ion batteries

Although Ti3 C2 MXene sheets have attracted extensive attention in lithium-ion storage techniques,their restacking makes against and even hinders the Li ions diffusion within them,thereby decreasing the capacity as well as rate performance of conventional MXene anode.Here,for the first time,we roll up the Ti3 C2 Tx sheets into scrolls with unclosed topological structure and the interlayer galleries to alleviate the restacking problem.Thus,Ti3 C2 Tx scrolls as anode materials in lithium-ion batteries(LIBs)have higher capacity and better rate performance than Ti3 C2 Tx sheets.On the bases of these,high-capacity silicon nanoparticles are added during the rolling process to in-situ produce Ti3 C2 Tx/Si composite scrolls.The addition of 10%silicon nanoparticles shows the best overall improvement among capacity,rate capability and cyclic stability for Ti3 C2 Tx scrolls.     

CNTs@S composite as cathode for all-solid-state lithium-sulfur batteries with ultralong cycle life

The main challenges in development of traditional liquid lithium-sulfur batteries are the shuttle effect at the cathode caused by the polysulfide and the safety concern at the Li metal anode arose from the dendrite formation. All-solid-state lithium-sulfur batteries have been proposed to solve the shuttle effect and prevent short circuits. However, solid-solid contacts between the electrodes and the electrolyte increase the interface resistance and stress/strain, which could result in the limited electrochemical performances.In this work, the cathode of all-solid-state lithium-sulfur batteries is prepared by depositing sulfur on the surface of the carbon nanotubes(CNTs@S) and further mixing with Li_(10) Ge P_2 S_(12) electrolyte and acetylene black agents. At 60 °C, CNTs@S electrode exhibits superior electrochemical performance, delivering the reversible discharge capacities of 1193.3, 959.5, 813.1, 569.6 and 395.5 m Ah g~(-1) at the rate of 0.1, 0.5,1, 2 and 5 C, respectively. Moreover, the CNTs@S is able to demonstrate superior high-rate capability of660.3 m Ah g~(-1) and cycling stability of 400 cycles at a high rate of 1.0 C. Such uniform distribution of the CNTs, S and Li_(10) Ge P_2 S_(12) electrolyte increase the electronic and ionic conductivity between the cathode and the electrolyte hence improves the rate performance and capacity retention.     

Manipulating interfacial stability of LiNi0.5Co0.3Mn0.2O2 cathode with sulfide electrolyte by nanosized LLTO coating to achieve high-performance all-solid-state lithium batteries

All-solid-state lithium batteries(ASSLBs) based on sulfide solid-state electrolytes and high voltage layered oxide cathode are regarded as one of the most promising candidates for energy storage systems with high energy density and high safety.However,they usually suffer poor cathode/electrolyte interfacial stability,severely limiting their practical applications.In this work,a core-shell cathode with uniformly nanosized Li0.5La0.5TiO3(LLTO) electrolyte coating on LiNi0.5Co0.3Mn0.2O2(NCM532) is designed to improve the cathode/electrolyte interface stability.Nanosized LLTO coating layer not only significantly boosts interfacial migration of lithium ions,but also efficiently alleviates space-charge layer and inhibits the electrochemical decomposition of electrolyte.As a result,the assembled ASSLBs with high mass loading(9 mg cm-2)LLTO coated NCM532(LLTO@NCM532) cathode exhibit high initial capacity(135 mAh g^-1) and excellent cycling performance with high capacity retention(80% after 200 cycles) at 0.1 C and 25℃.This nanosized LLTO coating layer design provides a facile and effective strategy for constructing high performance ASSLBs with superior interfacial stability.     

Needle-like cobalt phosphide arrays grown on carbon fiber cloth as a binder-free electrode with enhanced lithium storage performance

Cobalt phosphide(CoP) is a promising anode candidate for lithium-ion batteries(LIBs) due to its high specific capacity and low working potential.However,the poor cycling stability and rate performance,caused by low electrical conductivity and huge volume variation,impede the further practical application of CoP anode materials.Herein,we report an integrated binder-free electrode featuring needle-like CoP arrays grown on carbon fiber cloth(CC) for efficient lithium storage.The as-prepared CoP/CC electrode integrates the advantages of 1 D needle-like CoP arrays for efficient electrolyte wettability and fast cha rge transpo rtation,and 3 D CC substrate for superior mechanical stability,flexibility and high conductivity.As a result,the CoP/CC electrode delivers an initial specific capacity of 1283 mAh/g and initial Coulombic effeciencies of 85.4%,which are much higher than that of conventional CoP electrode.Notably,the Co P/CC electrode shows outstanding cycling performance up to 400 cycles at 0.5 A/cm² and excellent rate performance with a discharge capacity of 549 mAh/g even at 5 A/cm².This work demonstrates the great potential of integrated CoP/CC hybrid as efficient bind-free and freestanding electrode for LIBs and future flexible electronic devices.     

A multifunctional separator with Mg(OH)2 nanoflake coatings for safe lithium-metal batteries

Dendrite growth and thermal runaway induce serious safety hazards,impeding the practical applications of lithium metal batteries(LMBs).Although extensive advances have been attained in terms of LMB safety,most work only focus on a single aspect at a time.This paper reports a multifunctional separator coated by Mg(OH)2 nanoflakes with various excellent properties including electrolyte wettability,ionic conductivity,Li+ transference number,puncture strength,thermal stability and flame retardance.When used in LMBs,the Mg(OH)2 nanoflake coatings enable uniform Li+ distributing,which makes it homogeneous to deposit lithium,realizing effective dendrite suppression and less volume expansion.Meanwhile,Mg(OH)2 coatings can ensure LMBs are in normal conditions without thermal runaway until 140 ℃.A part of lithium can be converted into Li+ ions by Mg(OH)2 during repeated charge/discharge cycles,not only reducing the risk of separator damage and consequent short circuit,but also replenishing the capacity loss of LMBs.The Mg(OH)2 nanoflakes can coat on all kinds of commercial separators to improve their performances,which offers a facile but effective strategy for fabricating multifunctional separators and a comprehensive insight into enhancing LMB safety.     

Performance enhancement of phosphoric acid fuel cell using phosphosilicate gel based electrolyte

Replacement of phosphoric acid electrolyte by phosphosilicate gel based electrolytes is proposed for performance enhancement of phosphoric acid fuel cell(PAFC).Phosphosilicate gel in paste form and in powder form is synthesized from tetraethoxysilane and orthophosphoric acid using sol-gel method for two different P/Si ratio of 5 and 1.5 respectively.Replacement of phosphoric acid electrolyte by phosphosilicate gel paste enhances the peak power generation of the fuel cell by 133% at 120 ℃ cell temperature;increases the voltage generation in the ohmic regime and extends the maximum possible load current.Polyinyl alcohol(PVA) is used to bind the phosphosilicate gel powder and to form the hybrid crosslinked gel polymer electrolyte membrane.Soaking the membrane with phosphoric acid solution,instead of that with water improves the proton conductivity of the membrane,enhances the voltage and power generation by the fuel cell and extends the maximum possible operating temperature.At lower operating temperature of 70 ℃,peak power produced by phosphosilicate gel polymer electrolyte membrane fuel cell(PGMFC) is increased by 40% compared to that generated by phosphoric acid fuel cell(PAFC).However,the performance of composite membrane diminishes as the cell temperature increases.Thus phosphosilicate gel in paste form is found to be a good alternative of phosphoric acid electrolyte at medium operating temperature range while phosphosilicate gel-PVA composite offers performance enhancement at low operating temperatures.