复合酶耦合酶解酸处理后玉米秸秆的研究

以玉米秸秆为研究对象,经过2%硫酸预处理后,利用果胶酶、β-葡萄糖苷酶、纤维素酶三种酶协同酶解,以提高玉米秸秆的酶解产糖量。结果表明:当酶解时间为48h,果胶酶、β-葡萄糖苷酶、纤维素酶分别为45U/mL、30U/mL、60U/mL时,葡萄糖、木糖和酶水解得率分别为67.83%、3.25%、73.65%,相比纤维素酶单一酶解的葡萄糖、木糖和酶水解得率分别提高了65.04%、20.82%、65.06%。分步糖化发酵5天后,相比单一酶解发酵乙醇含量提高了72.5%。说明利用三种酶复合处理,能明显提高酶解产糖量。研究结果为玉米秸秆转化为可发酵糖技术的研究提供重要参考。     

Identification,quantification and Chrastil modelling of wheat straw wax extraction using supercritical carbon dioxide

Supercritical carbon dioxide (scCO₂) can be used as a “green” selective solvent for extractions of wheat straw waxes. For the first time, the crude extraction yields of wheat straw waxes and the yields of a single high value group of components (wax esters) using various scCO₂ conditions (305.15 to 373.15 K and 7.5 to 40 MPa) have been modelled using the Chrastil equation (Chrastil, 1982). The model accurately predicts both the crude yield and percentage of valuable wax esters within the extracts enabling maximum extraction efficiency. The key compounds within the waxes (fatty acids, sterols, fatty alcohols, wax esters, β-diketones and alkanes) have been identified and quantified. This study highlighted that, 14,16 hentriacontanedione was extracted at critical temperature and pressure in concentrations of 1000 μg.g⁻¹ straw. This molecule could demonstrate significant potential as a natural chelate for metal recovery and also in the formation of super-hydrophobic coatings.     

Effect of alkaline pretreatment on delignification of wheat straw

This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis.     

生物质水热液化和炭化产物特性研究

分别选取稻杆,水葫芦,纤维素和木聚糖（生物质模型化合物）为原料,在反应釜中进行水热液化（300℃,30min）和水热炭化（220℃,4h）实验,对液化产物和炭化产物进行分析。结果表明,稻杆获得重油产率达最大值21.62%。纤维素,木聚糖和水葫芦的重油产率分别为15.00%,11.61%和12.19%。生物质化学组分对其重油产率和组分有着一定的影响。液态产物分别利用总有机碳分析仪（TOC）和气质联用仪（GC-MS）进行测定。表明重质油中主要含有酮类,酚类,醛类,醇类和少量的酸类化合物。利用扫描电镜（SEM）和透射电镜（TEM）对水热炭化固态产物进行了形貌与结构表征,得到具有核壳结构的纳米微球。纤维素,水葫芦和稻杆有着较高的焦炭产率,最后对木聚糖的碳微球形成机理进行初探。     

硝酸乙醇法测定纤维素含量

根据秸秆乙醇的工艺特点,对硝酸乙醇法测定玉米秸秆、小麦秸秆、稻草及其预处理后物料的纤维素含量进行了研究.优化了粉碎时长、硝酸-乙醇混合液处理遍数、试样粒度及抽滤漏斗孔径四个参数.确定了优化后的测定方法:秸秆试样粉碎时长15 s,硝酸-乙醇混合液处理4遍,粒度40～60目,使用G2玻璃砂芯漏斗.秸秆预处理后物料试样粉碎时...     

对直接标准化算法的改进及其应用

由于各种仪器之间存在差异,主机上建立的定量模型用于从机会导致预测结果出现较大偏差。目前主要通过有标样方法和无标样方法来减小预测偏差。该文对现有标样方法中的直接标准化算法进行改进,在转移矩阵的建立过程中,对从仪器数据矩阵进行主成分分解,以预测均方差为判定标准,确定最终的转移矩阵。并以玉米和烟草数据为对象,测试了该法的有效性。玉米样品含有2种成分:水分和蛋白质;烟草样品含有4种成分:还原糖、总糖、总氮和总碱。结果表明,对于玉米样品中的2种成分,采用改进的方法可显著提高预测的准确度;对于烟草中的4种成分而言,采用改进的方法可获得稳健的预测结果。     

超疏水超亲油玉米秸秆粉油污吸附剂的制备及其在油水分离中的应用

超疏水超亲油材料因其在油水分离等领域有广泛的应用前景而引起人们极大关注。 目前,有很多方法可以用来制备超疏水超亲油材料,但因其过程复杂、成本高、环境适应性差限制了其在实际生产、生活中应用。 本文以玉米秸秆为原料,经TiO₂ 溶胶浸涂并经辛基三甲氧基硅烷修饰后显示出超疏水和超亲油,水滴、油滴在其表面的接触角分别为160°和0°。 研究结果显示,玉米秸秆粉表面的超疏水性源于其表面微纳米复合阶层结构及低表面能化学组成的协同作用。 利用玉米秸秆粉表面的憎水性和亲油性,能将其用于水面油污的吸附和分离,具有分离效率高、稳定性好、可循环利用的优点。 相比于其它材料,以玉米秸秆为原料制备超疏水超亲油的油污吸附剂,原料丰富、成本低、过程简单、易降解、可循环利用,有望在生产、生活中得到应用。     

神府煤与稻杆共热溶研究

研究了神府煤与稻杆在1-甲基萘溶剂中不同温度下的共热溶行为。相对神府煤,稻杆单独热溶时具有更高的热溶率,表明其具有较好的热溶活性。但稻杆的热溶过程中产生大量的挥发性气体,导致其热溶率和热溶物产率之间的较大差异。神府煤单独热溶时,其热溶率与热溶物产率之间的差异相对较小。神府煤与稻杆的共热溶表明,两者之间存在协同效应,并且该协同效应受温度的影响显著。在热溶温度为320~340 ℃时,对热溶物产率而言具有正的协同效应,也即其热溶物产率的实验值大于通过神府煤与稻杆单独热溶时热溶物产率经质量加权平均计算得到的理论值。在研究的热溶温度范围内,共热溶的热溶率实验值均低于质量加权平均的理论计算值。相对于理论计算值,在320 ℃时热溶物产率的实验值增加达到最大,为7.9%。此外,通过对热溶物的性质表征,还进一步探讨了共热溶过程中的协同作用机理。     

Efficient barrier properties of mechanically enhanced agro-extracted cellulosic biocomposites

The objective of this work was to prepare the mechanically stable hydrophobic biocomposites by incorporating the cellulose fibers into the polymer matrices for their applications in biomedical and food packaging. Herein, two different types of biocomposites were prepared by mixing polylactic acid (PLA) and polyhydroxybutyrate (PHB) with the agro-extracted cellulose, separately at 170 °C. The influence of the cellulose fibers on the thermal, mechanical, and barrier properties of polymer matrices (PLA and PHB) was observed. With an increase in the cellulose content in PLA and PHB, the tensile strength of the biocomposite materials significantly improved with the enhancement of 24.45% and 32.08%, respectively, compared with the pure PLA and PHB. Furthermore, a decrease of 74.16% and 73.49% in the water vapor transmission rate and oxygen transmission rate, respectively, was observed for cellulose/PHB biocomposites. This study highlights that adding cellulose fibers significantly improves the mechanical and the barrier properties of PLA and PHB, suggesting their biocomposites for use in biodegradable polymer industries.     

超高效液相色谱-串联质谱快速检测精米、玉米与土豆样品中噻呋酰胺残留

采用分散固相萃取(QuEChERS)为样品前处理方法,建立了超高效液相色谱-串联质谱(UPLCMS/MS)快速检测精米、玉米和土豆中噻呋酰胺残留的分析方法。样品经乙腈提取,PSA净化,超高效液相色谱分离,电喷雾电离、负离子扫描,三重四极杆串联质谱以多反应监测扫描方式进行检测,基质匹配标准品外标法进行定量分析。结果显示,噻呋酰胺在1.0~1 000μg·L-1范围内呈良好线性(r2=0.999 0)。在0.01~1.0 mg·kg-1加标水平范围内,噻呋酰胺在精米、玉米和土豆中的平均回收率为89.1%~109.3%,相对标准偏差为3.5%~8.7%,检出限(LOD)为0.009~0.015μg·kg-1,定量下限(LOQ)为0.032~0.049μg·kg-1。该方法简便、快速、准确,可用于精米、玉米和土豆中噻呋酰胺农药残留的确证检测。