Single and double electron capture associated with target K-shell ionization for F7 + ,8 + ,9++Ar

Ratios for target Ar K-shell ionization associated with single and double electron capture, as well as the ratios corresponding to total capture and the projectile K x rays, were determined for 1.8- to 2.2-MeV/u F^{7 + ,8 + ,9+} projectiles. This work was performed at Western Michigan University with the tandem Van de Graaff accelerator. Coincidences between emitted K-shell X-rays (both target and projectile) and the corresponding charge-changed particles were observed. The F⁹⁺ Ar K X-ray coincidence ratios for double to single capture are found to well exceed unity over the limited energy range of the measurements. Possible explanations for this anomalous behavior are discussed.     

Ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction for the determination of cadmium in water samples: Optimization using response surface methodology

A sensitive, simple, and rapid method is developed for ion-pair-based surfactant-assisted dispersive liquid–liquid microextraction (IPSA-DLLME) and flame atomic absorption spectrometric determination of cadmium in water samples. In this procedure, trace amounts of Cd²⁺ were converted to CdI ₄ ^2– , and after addition of a tetrabutylammonium bromide (TBAB) solution as cationic surfactant the analyte was transformed to the ion-pair state. This cadmium species was extracted by fast injection of a solution containing 200 μL of chloroform and 800 μL of methanol as extraction and disperser solvents, respectively. The pH of the sample solution, concentration of iodide, TBAB amount, and the extractant volume were optimized using a 27-run Box–Behnken design with a triplicate central point. Under the optimized conditions, the calibration curve was linear in the range 1–200 μg L^–1 (R ² = 0.9959); with the detection limit (signal/noise = 3) of 0.28 μg L^–1. The relative standard deviations (RSD) for eight runs (Cd²⁺ = 10 μg L^–1) and enrichment factor were found to be 3.04 % and 50, respectively.     

Formation of Heterocyclic and Polycyclic Compounds from Amino Alcohols and Dialdehydes

Amino alcohols typically react with aldehydes to produce oxazolidines. It was hypothesized that the condensation of several commercially available amino alcohols with dialdehydes would produce a series of bicyclic oxazolidines containing two secondary amines. However, there were remarkable differences in the type of products formed depending on the structure of the dicarbonyl compounds and the reaction conditions. When linear aliphatic dialdehydes such as glyoxal were used, the expected bis‐oxazolidines were not produced; instead, polycyclic structures or oxazines were formed. However, when cyclic dialdehydes such as 1,3/1,4 cyclohexane dicarboxaldehyde were used, they resulted in products bearing the desired oxazolidine moieties.     

Effect of alkaline pretreatment on delignification of wheat straw

This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis.     

Identification,control strategies,and analytical approaches for the determination of potential genotoxic impurities in pharmaceuticals: A comprehensive review

Potential genotoxic impurities in pharmaceuticals at trace levels are of increasing concern to both pharmaceutical industries and regulatory agencies due to their possibility for human carcinogenesis. Molecular functional groups that render starting materials and synthetic intermediates as reactive building blocks for small molecules may also be responsible for their genotoxicity. Determination of these genotoxic impurities at trace levels requires highly sensitive and selective analytical methodologies, which poses tremendous challenges on analytical communities in pharmaceutical research and development. Experimental guidance for the analytical determination of some important classes of genotoxic impurities is still unavailable in the literature. Therefore, the present review explores the structural alerts of commonly encountered potential genotoxic impurities, draft guidance of various regulatory authorities in order to control the level of impurities in drug substances and to assess their toxicity. This review also describes the analytical considerations for the determination of potential genotoxic impurities at trace levels and finally few case studies are also discussed for the determination of some important classes of potential genotoxic impurities. It is the authors’ intention to provide a complete strategy that helps analytical scientists for the analysis of such potential genotoxic impurities in pharmaceuticals.     

Numerical analysis of dual variable of conductivity in bioconvection flow of Carreau–Yasuda nanofluid containing gyrotactic motile microorganisms over a porous medium

Journal of Thermal Analysis and Calorimetry - The increasing need of the modern era of technology for better ways to increase the heat transfer performance of thermal systems has made nanoliquids...     

Structural,compositional and hardness properties of hydrogenated amorphous carbon nitride thin films synthesized by dense plasma focus device

The hydrogenated amorphous carbon nitride (a‐CN_x:H) thin films were synthesized on the SS‐304 substrates using a dense plasma focus device. The a‐CN_x:H thin films were synthesized using CH₄/N₂ admixture gas and 20 focus deposition shots on substrates placed at different distances from the anode top. X‐ray photoelectron spectroscopy and Raman analysis confirmed different C–N bonding in the a‐CN_x:H thin films. A decrease in the N/C ratio as well as the sp³/sp² ratio with an increase in the substrate distance has been observed. The higher amount of C–N formation for the film synthesized at 10 cm is observed which decreases with increasing distance. The X‐ray photoelectron spectroscopy and Raman analysis affirmed the C ≡ N presence in all the thin films synthesized at different distances. The morphology of the synthesized a‐CN_x:H thin films showed nanoparticles and nanoparticle clusters formation at the surface. The hardness results showed comparatively lower hardness of the a‐CN_x:H thin films due to the presence of C ≡ N. The C–N formation with lower amount of C ≡ N and a higher N/C ratio as well as a higher sp³/sp² ratio for the films synthesized at 10 cm show reasonably higher hardness. Copyright © 2016 John Wiley & Sons, Ltd.