基于级联PPMgLN晶体的双倍/三倍频双波长激光器

本文演示了紧凑的绿色和近红外双色连续波激光光源,其发射波长分别为516 nm和775 nm。设计并制造了级联的周期性极化掺镁铌酸锂晶体,用于同时转换通信波长的二次谐波(SHG)和三次谐波(THG),可以在相同温度下获得绿色和近红外激光的输出。通过建立一个单程激光测量系统,在2 W泵浦功率下获得516 nm的0.15 mW绿光和775 nm的1.19 mW的光,晶体温度控制在30.8 ℃。实验结果将为单激光器泵浦的紧凑型双波长共线激光器提供重要的案例。     

LD泵浦Nd∶LuVO4/Cr4+∶YAG被动调Q激光器

采用大功率半导体激光器端面泵浦Nd∶LuVO4晶体，利用Cr4+∶YAG晶体作为可饱和吸收元件，实现了1.06 μm激光的被动调Q运转.在泵浦功率为19.1 W时，获得最高平均输出功率为4.58 W，脉冲宽度为84 ns，单脉冲能量为36.6 μJ以及峰值功率为436.2 W的激光脉冲.     

Luminescent properties of Ce in MSO4 (M: Ca, Sr and Ba) and the effect of Na co-doping

The optical properties of Ce³⁺ in CaSO₄, SrSO₄ and BaSO₄ are reported. The Ce³⁺ ion shows 4f⁰5d¹→²F_5/2,²F_7/2 luminescence in all three sulphates. Co-doping with Na⁺ does not change the local surrounding of the Ce³⁺ ion, but enhances the amount of Ce³⁺ ions built in. Under optical excitation, besides the typical Ce³⁺ doublet emission in the ultraviolet spectral region, band emission around 445 nm was observed. This band emission was not assigned to emission from a Ce³⁺ centre, but to emission from an impurity-trapped exciton. Under X-ray excitation, both Ce³⁺ emission and an emission band around 380 nm was observed. This band was assigned to emission from a self-trapped exciton.     

Cr4+∶YAG固体激光器效率的理论分析

对Cr4+∶YAG固体激光器的吸收效率、量子效率、储存效率和提取效率等本征效率进行了分析.Cr4+∶YAG晶体的吸收截面、发射截面、上能级寿命和激活离子浓度等对激光器的本征效率有很大的影响.提高Cr4+∶YAG晶体的光学品质和激活离子的掺杂浓度，优化泵浦源的运转波长和激光腔的设计都能显著改善Cr4+∶YAG固体激光器的本征效率.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Rare earth photoionization study by the resonant microwave cavity technique

Photoconductivity spectra of rare earth-doped insulating materials are measured using the resonant microwave cavity method. This technique is based on the detection of the cavity Q-factor changes induced by irradiation of the sample (inserted in the cavity) by a pulsed tunable laser. Results obtained with Lu₂(SiO₄)O:Ce³⁺ and BaF₂:Eu²⁺ are presented and discussed. Photoionization thresholds at 400 nm (3.1 eV) and 310 nm (4.0 eV) are measured for Lu₂(SiO₄)O:Ce³⁺ and BaF₂:Eu²⁺, respectively.     

对撞增强型YAG相位共轭腔

降低SBS相位共轭腔的启动阈值以及如何提高输出光束的质量一直是人们关心的课题。报道了在YAG激光器上运行一种新型对撞增强型YAG受激布里渊散射相位共轭激光腔的输出特性。该腔具有较低的启动阈值和较高的输出能量;该腔型最高能输出150mJ的能量,输出脉宽最窄为11ns,光束发散角为1.3mrad,输出能量和光束质量都很优良。     

ns脉冲激光对K9玻璃的破坏实验

 采用高速PIN光电探测器和高带宽的数字存储示波器，实时检测透射光脉冲和散射光脉冲的变化特征，并将之用作材料破坏的光学判据，测量得到K9玻璃在1.06μm纳秒脉冲激光作用下的能量损伤阈值约18mJ，相应的能量密度阈值为1.0kJ/cm²。通过分析透射光脉冲和散射光脉冲的特征，给出了材料的破坏时刻，并推断出K9玻璃所能承受的极限光强为10¹⁵W/m²。研究了能量透过率与泵浦能量的关系，并初步探讨了透明材料的破坏机理。结果表明：在多纵模激光的作用下，透明光学材料破坏是电离击穿与自聚焦效应综合作用的结果。     

Nd~(3+):YAG激光的光纤传输

首先叙述了光纤传输Nd~(3+): YAG激光的优点,接着分析了不同光纤和其传输Nd~(3+): YAG激光的特点。然后通过对光纤传输系统各部分的分析与设计,结合实际,设计了光纤耦合机构。最后,对来自于工件反射光问题提出了解决方案。     

High power CW solid-state multilaser system

A laser system containing four CW Nd:YAG double-rod lasers, transforming optics and a fibre with input-output optics has been designed and investigated. It is shown that reduction of the beam parameter product of the non-Gaussian beams in the image space of the lens has made it possible to collect the emission of four lasers to the same fibre. Independent laser operation has provided the output power control in the range of 10–900 W with a stable light spot size on the input end of the fibre.