Phosphonate electrochemical recognition by molecularly imprinted deposited film

In this paper, thin films of titanium oxide imprinted with O,O-dimethyl-(2,4-dichlorophenoxyacetoxyl)(3′-nitrobenyl) methinephosphonate (Phi-NO₂) were prepared via liquid phase deposition (LPD) method on a glassy carbon electrode. The imprinted molecular in the films was removed by treatment with immersion in CH₂Cl₂. X-ray diffraction (XRD) and electrochemical methods were introduced to show the evidence of the molecular imprinting phenomenon. It was also found that the recognition ability of the sensor depended on the substituents associated with tridimensional structures of the nitro-compounds. Under the optimized condition, the sensor showed better sensitivity, selectivity and reproducibility to the imprinted molecule and the linear relationship between the current and the concentration of analyte in the range of 0.1-50 μM was obtained. LPD proved to be a powerful method for imprinting titanium oxide thin sense films.     

分子印迹聚合物传感器的研究与发展

综述了分子印迹聚合物的历史发展、制备方法、聚合体系的选择、性能表征及作用机理。主要介绍了其作为传感器敏感膜方面的应用,并对需解决的问题提出了建议。     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

水杨酸分子印迹分离介质的水相制备及色谱行为

以水杨酸为模板分子,2-乙烯基吡啶为功能单体,在甲醇/水体系中制备了水杨酸分子印迹聚合物,并将其作为高效液色谱分离介质研究了其对水杨酸及水杨酸的位置异物体———对羟基苯甲酸的色谱行为。结果表明,该聚合物固定相表现出良好的分离选择性,能够使水杨酸与对羟基苯甲酸快速基线分离。通过对流动相组成与色谱分离效果关系的探讨,证实溶质与印迹固定相的疏水相互作用是分子识别的主要作用力。     

儿茶素活性成分分子印迹聚合物的固相萃取研究

以表没食子儿茶素没食子酸酯(Epigallocatechin-gallate,EGCG)为模板分子,α-甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在光冷引发条件下合成EGCG分子印迹聚合物,利用该聚合物制成分子印迹固相萃取柱,用于固相萃取茶叶提取物茶多酚,对萃取柱中的清洗液、洗脱剂、上载量等进行了选择.结果表明,在萃取柱上载样品之后,先用V(甲醇):V(水)＝1:9溶液进行清洗,再用V(甲醇):V(乙酸)＝9:1混合液进行目标分子的洗脱,可以得到比较纯的目标物质EGCG(色谱峰相对峰面积达92.4%),萃取柱在上载样品并进行清洗、洗脱之后,EGCG的回收率达69.3%.分子印迹柱具有较好的稳定性和耐用性能,使用20次后其选择性识别能力仍未降低,但空白印迹柱却没有这样的选择性识别能力.     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.     

选择性提取单取代磺酰脲除草剂的印迹聚合物的合成及评价

以丙烯酰胺为功能单体合成了新型的单嘧磺隆印迹聚合物,用平衡吸附及液相色谱的方法研究了印迹聚合物对于印迹分子及其结构类似化合物NK#94827的识别特性及亲和能力.研究结果表明,以丙烯酰胺为功能单体得到的印迹聚合物对NK#94827具有较强的识别能力;为印迹聚合物应用于环境样品中NK#94827及其结构类似化合物的分析打下了基础.     

分子印迹聚合物微球的制备及表征技术

分子印迹聚合物微球作为一种具有分子识别能力的新型高分子材料,以其吸附选择性好、色谱效率高、便于功能设计等优点在固相萃取、药物手性分离等领域取得了应用.本文介绍了分子印迹聚合物微球的主要制备方法,比较了不同的聚合物微球制备方法用于分子印迹技术中的特点,同时针对不同聚合方法对分子印迹聚合物微球性能的影响作了相应评述,此外对其结构与性能的表征方法也作了较为详细的介绍,在此基础上分析了存在的问题及今后的发展方向.     

Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

分子印迹电化学传感器的研究进展

本文综述了分子印迹电化学传感器的制备及其在电分析化学领域中的应用研究。引用文献83篇。