金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

基于金属卟啉的分子印迹聚合物的合成及其对三唑类杀菌剂识别性能研究

以三唑类杀菌剂氟环唑为印迹分子,5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基卟啉锌为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了新型的基于金属卟啉的分子印迹聚合物.紫外-可见光谱研究表明印迹分子与功能单体在聚合前形成1∶1配合物.通过选择性吸附和固相萃取表征研究了该印迹聚合物对氟环唑及具有类似化学结构的三唑类杀菌剂的识别能力,并与非印迹聚合物进行了比较,结果表明印迹聚合物具有良好的特异性识别性能,同时,印迹聚合物的交联度及吸附溶剂的极性对印迹效果有着显著影响.     

农药丙溴磷分子印迹聚合物微球的制备与结合性能研究

采用分子印迹技术,以丙溴磷为模板分子,分别以α-甲基丙烯酸和丙烯酰胺为功能单体,在乙腈溶液中合成了2种对丙溴磷具有选择性结合能力的分子印迹聚合物.紫外光度法研究表明,模板分子丙溴磷与α-甲基丙烯酸之间的作用强于其与丙烯酰胺之间的作用;扫描电镜的研究则表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物呈微球形,粒径约为0.5 ～2 μm;利用平衡结合实验研究了不同功能单体制备的聚合物对模板分子的结合能力及其对底物的选择性,经Scatchard模型分析,求出了聚合物的最大表观结合量(Qmax)和平衡离解常数(Kd)分别为49.44 μmol/g 和1.05 mmol/L.研究表明以α-甲基丙烯酸为功能单体合成的分子印迹聚合物对丙溴磷表现出更强的结合能力和更高的选择性.     

选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

沉淀聚合制备诺氟沙星-Zn2+分子印迹聚合物及其印迹方式的研究

采用沉淀聚合的方式以诺氟沙星(NFA)-Zn2+为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2+的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2+及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2+形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2+形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶(4-VP)为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.     

不同功能单体合成的谷胱甘肽分子印迹聚合物的研究

采用分子印迹技术, 以谷胱甘肽为模板分子, 以丙烯酰胺、甲基丙烯酸为功能单体制备分子印迹聚合物; 通过静态吸附试验, 探讨了合成分子印迹聚合物时模板分子与功能单体的物质的量比、上样液pH 值、吸附平衡时间、上样液浓度对聚合物吸附性能的影响; 实验结果表明: 以丙烯酰胺、甲基丙烯酸为功能单体制备谷胱甘肽分子印迹聚合物时,谷胱甘肽与丙烯酰胺、甲基丙烯酸的最适摩尔比分别为1:5 和1:4, 以及最适静态吸附条件为: 上样液pH 值分别为3.0 和5.0 左右; 上样液浓度分别为1.50～2.00 g/L 和1.00～1.50 g/L; 静态吸附平衡时间为18 和20 h 左右. 同时也探讨了分子印迹聚合物对谷胱甘肽结构类似物的吸附性能, 结果表明, 所合成的分子印迹聚合物对谷胱甘肽具有良好的选择性吸附能力. 同时也研究了分子印迹聚合物对酵母抽提物中谷胱甘肽的吸附性能, 以丙烯酰胺和甲基丙烯酸为功能单体制备的分子印迹聚合物对混合体系中谷胱甘肽的一次性提取率分别为41%和77%. 分子印迹聚合物均表现出了较好的吸附特性, 为分离提纯谷胱甘肽提供一种可选择的途径.     

Synthesis of Norfloxacin-Zinc （II） Imprinted Polymer by Precipitation Polymerization and Study on Its Imprinting Form

采用沉淀聚合的方式以诺氟沙星（NFA）-Zn2＋为模板分子,乙二醇二甲基丙烯酸酯为交联剂,分别选取酸性功能单体甲基丙烯酸与碱性功能单体4-乙烯基吡啶制备了诺氟沙星-Zn2＋的分子印迹聚合物.通过紫外光谱研究发现诺氟沙星与Zn2＋及两种功能单体均发生了金属配位印迹作用且形成了比例不同的印迹复合物.红外光谱的功能基团的表征结果显示,甲基丙烯酸与诺氟沙星-Zn2＋形成了以诱导作用占优的三元配合物,而4-乙烯基吡啶则与诺氟沙星-Zn2＋形成了共轭作用占优的三元配合物.扫描电镜及粒径分布实验表征了聚合物的物理特性,结果显示印迹聚合物的表面存在孔及孔道结构而非印迹聚合物的表面较致密不存在孔且制备的印迹聚合物的粒径均在100μm以下,其平均粒径为39μm.等温结合及选择性实验的结果表明4-乙烯基吡啶为功能单体制备的印迹聚合物的选择性识别性能优于甲基丙烯酸为功能单体制备的印迹聚合物,其特异性吸附容量和印迹指数分别为66.84μmol/g和4.207.同时在混合溶液的选择性实验中以4-乙烯基吡啶（4-VP）为功能单体制备的印迹聚合物的选择识别诺氟沙星的能力优于以甲基丙烯酸为功能单体的聚合物,其识别因子分别为3.408和2.909,而非印迹聚合物对底物的吸附量较小且识别因子均接近于1,说明非印迹聚合物对底物的识别为非选择性的.     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

杯芳烃衍生物和丙烯酰胺作为复合功能单体的分子印迹聚合物对海因类化合物的选择性识别研究

以杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体,将其运用到分子印迹技术中,对海因类化合物R-苄基海因进行选择性识别.研究结果表明,由单一的杯[4]芳烃衍生物或丙烯酰胺作为功能单体的分子印迹聚合物对R-苄基海因的选择性均不高,而由杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体的分子印迹聚合物对模板分子具有较高的特异选择性.     

内分泌干扰物雌酮分子印迹新型吸附功能材料的制备及其选择性能研究料

采用分子印迹本体聚合法,制备了对内分泌干扰物雌酮具有高选择识别能力的分子印迹聚合物。吸附动力学和选择性实验结果表明,与非印迹聚合物相比,印迹聚合物具有较高的吸附容量和吸附速率,对模板分子具有较高的选择性。聚合反应条件对印迹聚合物的吸附和识别性能有重要影响,以丙烯酰胺为功能单体,模板分子、功能单体和交联剂摩尔比为1：3：6,制备的印迹聚合物具有较高的选择和吸附性能。     

Molecularly imprinted polymer for solid‐phase extraction of ephedrine and analogs from human plasma

A molecularly imprinted polymer (MIP) was synthesized and evaluated to selectively extract ephedrine from human plasma. The MIP synthesis was performed in chloroform with methacrylic acid as a functional monomer and the target alkaloid as a template molecule. The resulting MIP was applied to the selective extraction of ephedrine from a pure aqueous medium. A recovery about 74% was obtained using the MIP with only 7% on the nonimprinted polymer (NIP). A very straightforward selective SPE procedure was then successfully applied to the direct extraction of ephedrine from spiked human plasma with a high extraction recovery (68%) on the MIP with no recovery on the NIP. Moreover, the MIP was used for the selective extraction of catecholamine neurotransmitters, i.e. adrenaline and noradrenaline.     

Preparation,evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Molecularly imprinted polymer (MIP) for solid extraction and preconcentration of catechins have been successfully prepared by a thermal polymerization method using quercetin as template, 4-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. A solution mixture of acetone and acetonitrile was used as porogen. Systematic investigations of the influence of monomer, cross-linker, porogen, as well as polymerization conditions on the properties of the MIPs were carried out. The quercetin MIPs were evaluated according to their selective recognition properties for quercetin, structurally related compounds (catechin, epigallocatechin gallate and epicatechin) and a unrelated compound of similar molecular size (α-tocopherol). Good binding was observed for quercetin, catechin and epigallocatechin gallate with an optimized MIP in a solid phase extraction system. Adsorption and kinetic characteristics were evaluated for catechins which indicated that the synthesized polymer had high adsorption capacity and contained homogeneous binding sites. Chemical and morphological characterization of the MIP was investigated by FTIR, SEM and BET, which confirmed a high degree of polymerization. Finally, the MIP was successfully applied to the clean-up and preconcentration of catechins from several natural samples.     

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid‐phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high‐performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI‐removed SB extract was obtained by one‐step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation, evaluation and application of molecularly imprinted solid-phase microextraction monolith for selective extraction of pirimicarb in tomato and pear

A simple, rapid and sensitive method for the determination of pirimicarb in tomato and pear using polymer monolith microextraction (PMME) based on the molecularly imprinted polymer (MIP) monolith combined with high-performance liquid chromatography-photodiodes array detector (HPLC-PAD) was developed. By optimizing the polymerization conditions, such as the nature of porogenic solvent and functional monomer, the molar ratio of the monomer and cross-linker, an pirimicarb MIP monolith was synthesized in a micropipette tip using methacrylic acid (MAA) as the functional monomer, ethylene dimethacrylate (EGDMA) as the cross-linker and the mixture of toluene-dodecanol as the porogenic solvent. The MIP monolith showed highly specific recognition for the template pirimicarb. The monolith was applied for the selective extraction of pirimicarb in tomato and pear. Several parameters affecting MIP-PMME were investigated, including the nature and volume of extraction solvent, sample volume, flow rate and sample pH. Under the optimum PMME and HPLC conditions, the linear ranges were 2.0-1400 μg/kg for pirimicarb in tomato and pear with the correlation coefficient of above 0.999. The detection limits (s/n=3) were both 0.6 μg/kg. The proposed method was successfully applied for the selective extraction and determination of pirimicarb in tomato and pear.     

Synthesis and application of molecularly imprinted polymer on selective solid-phase extraction for the determination of monosulfuron residue in soil

A novel sample clean-up procedure using molecularly imprinted polymer as the solid-phase extraction material for the determination of monosulfuron residue in soil samples has been developed. The molecularly imprinted polymer (MIP) was synthesized by non-covalent method with monosulfuron as the template. The selectivity and affinity of the MIP was evaluated by equilibrium adsorption and HPLC experiments, which demonstrated that the MIP has specific affinity for the template. The template-MIP interaction was studied by investigating the influence of different mobile phases on the retention of the template, which provided basic knowledge for the selection of the washing and elution solutions in the molecularly imprinted solid-phase extraction (MISPE) process. The study indicated that polar organic solvents with hydrogen bonding abilities have stronger eluting strength for the monosulfuron. After the MISPE procedure, a clean baseline was obtained in the HPLC quantification analysis. The recoveries of the method using the combination of MISPE and HPLC were above 93% and the R.S.D. was less than 3.2% in the soil sample determinations. Low detection limit (0.08 microg g(-1), when defined as 3 times of the noise) was also obtained in the method evaluation study.     

染料木素分子印迹聚合物的制备及其识别性能

以染料木素为模板分子、4-乙烯基吡啶(4-VP)为功能单体、乙二醇二甲基双丙烯酸酯(EGDMA)为交联剂、四氢呋喃(THF)为溶剂,采用本体聚合法制备了染料木素的分子印迹聚合物;采用静态平衡结合实验研究了该分子印迹聚合物对染料木素的结合能力和选择性能.结果表明,与化学组成相同的相应非印迹聚合物相比,染料木素分子印迹聚合物对染料木素的吸附性能和选择性更好.利用所合成的分子印迹聚合物作为固相萃取材料填充固相萃取小柱,可以选择性地从豆奶粉中分离、富集染料木素;此外,该分子印迹聚合物还有望用于其他豆制品的分析检验.     

右旋邻氯扁桃酸分子印迹聚合物的制备及结合特性研究

以右旋邻氯扁桃酸为模板分子合成了具有高选择性的分子印迹聚合物作为手性分离材料 .紫外光谱研究说明在聚合开始之前模板分子与功能单体形成了配合物 ,并用Hyperchem软件模拟其分子结构 ,结合能分别为 -1 643 7× 1 0 4 J·mol- 1 和 -4 2 799× 1 0 4 J·mol- 1 .分子印迹聚合物对模板分子的结合量高于其它类似物 ,手性分离因子α达 1 76.Scatchard分析表明分子印迹聚合物在识别右旋邻氯扁桃酸分子过程中存在两类结合位点 ,与配合物模拟结构数目一致     

分子印迹固相萃取/高效液相色谱法分离和富集枳实中4种黄烷酮

采用沉淀聚合法以橙皮素为模板分子,2-乙烯基吡啶为功能单体,二甲基丙烯酸乙二醇酯为交联剂,合成了橙皮素分子印迹聚合物。利用紫外光谱法确定了最佳功能单体与配比,优化了合成条件。采用傅立叶变换红外光谱、扫描电子显微镜、静态吸附对聚合物进行表征。实验结果表明,分子印迹聚合物的吸附性能明显优于空白印迹聚合物,且此聚合物对柚皮苷、橙皮苷、柚皮素和橙皮素的相对选择系数分别为1.40,1.39,1.59和2.89,表明该分子印迹聚合物对4种黄烷酮有较好的选择性。将印迹聚合物作为固相萃取填料,对枳实提取液进行分离和富集,结果表明上述4种黄烷酮的提取率分别为72.6%,61.1%,95.4%和93.5%,分离富集效果良好,大大提高了枳实中4种黄烷酮的提取效率。     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.