两个基于2,5-二甲氧基对苯二甲酸和咪唑衍生物的超分子钴配位聚合物的结构及光催化反应

本文以咪唑衍生物为配体,通过水热合成法与钴离子制备出两个配位聚合物:{[Co(DTA)(1,4-DIB)(H₂O)]·H₂O}_n(1)和[Co(DTA)(1,3-BMIB)]_n(2)(1,4-DIB=1,4-二(1H-咪唑-1-基)苯; 1,3-BMIB=1,3-二(4-甲基-1H-咪唑-1-基)苯;H₂DTA=2,5-二甲氧基对苯二甲酸)。利用X射线单晶衍射、粉末衍射、热失重、元素分析、红外光谱以及固体紫外-可见光谱等对两个配合物进行了表征。结构分析证实配合物1和2是通过二维结构堆积成的三维超分子化合物。粉末衍射测试则显示两个配合物在水中有很好的稳定性。固体紫外-可见光谱显示两个配合物属半导体材料,对紫外-可见光有很强的吸收作用。在光催化实验中,配合物1和2可加快亚甲基蓝的降解速度。     

基于2,5-二溴对苯二甲酸配体的锌/钴配合物合成、晶体结构及性质

将有机物2,5-二溴对苯二甲酸(H₂L₁)和2,2′-联吡啶(L₂)作为双配体,使用溶剂热法和七水合硫酸锌(ZnSO₄·7H₂O)、六水合硝酸钴(Co(NO₃)₂·6H₂O)分别反应,得到配合物[Zn(L₁)(L₂)(H₂O)]_n(1)和配合物[Co(L₁)(L₂)(H₂O)]_n(2)。采用单晶X射线衍射、元素分析、红外光谱、紫外光谱、荧光光谱、热重分析等测试方法对这两种物质进行分析研究。单晶测试结果表明配合物1是单斜晶系,以Zn²⁺配位连接L^2-₁与L₂形成一维链状结构,各条链在分子间氢键和π…π共轭作用下有规律地堆叠形成三维网络结构。配合物2是三斜晶系,Co1离子和Co1ⁱ离子由H₂L₁上的羧酸氧原子O4和O4ⁱ连接,形成双齿螯合的配位结构单元,以Co²⁺配位连接 L^2-₁和L₂形成二维网格结构,各层在O—H…O分子间氢键和范德瓦耳斯力作用下有规律的堆叠形成三维网络结构。配合物1和2均含有芳香杂环、羧基杂环和氮杂环,具有良好的荧光性质和热稳定性,最大发射波长分别为345 nm和333 nm。     

A Novel Energetic Ionic Salt: Hydroxylammonium Potassium 3,3’-Dinitro-5,5’-bis-1,2,4-triazole-1,1’-diolate Dihydrate

A novel energetic ionic salt,hydroxylammonium potassium 3,3?-dinitro-5,5?-bis-1,2,4-triazole-1,1?-diolate dihydrate[(NH3OH)2K(DNOBT)1.5?2H2O],was synthesized and structurally characterized by elemental analysis,IR spectra,13C NMR and single-crystal X-ray diffraction.(NH3OH)2K(DNOBT)1.5?2H2O crystallizes in triclinic system,space group P with a=7.9212(6),b=9.1924(7),c=14.2549(15)?,a=103.917(2)°,β=99.736(2)°,g=104.8110(10)°,V=944.16(14)?^3,Z=2,Dc=1.855 g/cm^3,F(000)=538,μ=0.386 mm^-1,S=1.070,the final R=0.0525 and wR(I>2s(I))=0.1593.Thermal decomposition of(NH3OH)2K(DNOBT)1.5?2H2O and its intermediate potassium 1?-hydroxy-3,3?-dinitro-5,5?-bis-1,2,4-triazole-1-olate monohydrate[K(HDNOBT)?H2O]was studied by using DSC and TG-DTG.It was found that(NH3OH)2K(DNOBT)1.5?2H2O,which has primarily one exothermic decomposition process at 248.2℃,has better thermal stability than K(HDNOBT)?H2O which is decomposed at 210.9℃.     

非贵金属催化剂在羟甲基糠醛电氧化增值中的应用

羟甲基糠醛是呋喃类化合物,具有价格低廉及来源广泛的优点,可作为平台化合物用于制备其它高附加值产品.传统的热催化氧化增值方法需要高温、高压及贵金属催化剂,造成经济效益的下降.而电氧化方法不需要高温、高压条件;同时,通过对电催化剂的合理设计,非贵金属催化剂表面的羟甲基糠醛选择性转化已经得以实现,从而避免使用大量贵金属.因此,通过电氧化方法对羟甲基糠醛平台化合物进行高附加值转化受到了广泛关注.在羟甲基糠醛氧化的多种产物中,羟基和醛基被全部氧化为羧基的产物——2,5-呋喃二甲酸,被美国能源部列为“最具有价值的12种生物质衍生化学品”之一.鉴于此,本文介绍了羟甲基糠醛电氧化增值生产2,5-呋喃二甲酸的重要研究价值及相关非贵金属电催化剂的最新进展,并对催化羟甲基糠醛电氧化反应的非贵金属催化剂的发展前景进行了展望.     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

Dimethyl furan-2, 5-dicarboxylate (DMFDCA) is a valuable biomass-derived chemical that is an ideal alternative to fossil-derived terephthalic acid as a monomer for polymers. The one-step oxidation of 5-hydroxymethylfurfural (HMF) to DMFDCA is of practical significance. It not only shortens the reaction pathway but also avoids the separation process of intermediates; thus, reducing cost. In this work, non-noble bimetallic catalysts supported on N-doped porous carbon (CoMn@NC) were synthesized via a one-step co-pyrolysis procedure using different pyrolysis temperatures and proportions of metal precursors and additives. We employed the prepared CoMn@NC catalysts in the aerobic oxidation of HMF under mild reaction conditions to obtain DMFDCA. High-yield DMFDCA was obtained by screening the prepared catalysts and optimizing the reaction conditions, including the strength and amount of the base, as well as the reaction temperature. The optimized yield of DMFDCA was 85% over the Co₃Mn₂@NC-800 catalyst after 12 h at 50 ℃ using ambient-pressure oxygen. The physicochemical properties of the catalysts were determined using a variety of characterization techniques, the factors affecting the performance of each catalyst were investigated, and the relationship between the physicochemical properties and performance of the prepared catalysts was elucidated. A porous structure with a high surface area had a positive effect on mass transfer efficiency. Cobalt nanoparticles (NPs) and atomically dispersed Mn were coordinated to N-doped carbon to form M―N_x (where M = Co or Mn). Based on the Mott-Schottky effect, there was significant electron transfer between each metal and the N-doped carbon, additionally, the metal NPs supplied electrons to the carbon atoms. The electron-deficient metal site in the pyridinic N-rich carbon was beneficial for the activation of HMF and oxygen. The activation of oxygen produced reactive oxygen species (such as superoxide radical anions) to ensure high selectivity to DMFDCA through dehydrogenative oxidation of the hemiacetal intermediate and hydroxymethyl group of 5-hydroxymethyl-2-methyl-furoate. The existence of disordered and defective carbons increased the number of active sites. Subsequently, we performed a series of control experiments. Based on our current experimental results and previous studies, we propose a simple mechanism for the aerobic oxidation of HMF to DMFDCA. The catalyst was stable, its performance decreased slightly after two cycles, and it was tolerant to SCN⁻ ions and resistant against N or S poisoning. Furthermore, the use of this catalytic system can be expanded to various substituted aromatic alcohols, such as benzyl alcohols with different substituents, furfuryl alcohol, and heterocyclic alcohols. Simultaneously, the product type was further extended from methyl esters to ethyl esters with a high yield when the substrate reacted with ethanol. In conclusion, this catalytic system can be applied in the production of carboxylic esters for polymers.     

超高效液相色谱法测定食品接触材料制品中1,1′-磺酰基二（4-氯苯）和4,4′-联苯二酚的迁移量

参考GB 5009.156-2016和GB 31604.1-2015,以水、4%(体积分数)乙酸溶液、10%(体积分数)乙醇溶液、20%(体积分数)乙醇溶液、50%(体积分数)乙醇溶液、95%(体积分数,下同)乙醇溶液、异辛烷等食品模拟物浸泡聚苯砜材质的水杯、奶瓶、螺纹口和涂层罐,前5种食品模拟物的浸泡液直接过0.22μm滤膜,滤液采用超高效液相色谱法(UHPLC)分析。分取95%乙醇溶液和异辛烷浸泡液各10mL,于50℃,5 000Pa条件下旋转蒸发至近干,用70%(体积分数)甲醇溶液溶解、定容至10mL,过0.22μm滤膜,滤液采用UHPLC分析。以ACQUITY UPLC BEH C18色谱柱作固定相,以不同体积比甲醇和水的混合溶液作流动相进行梯度洗脱,在检测波长247nm下进行检测。结果显示,7种食品模拟物中的两种目标物可在6.500min以内实现完全分离,其中1,1′-磺酰基二(4-氯苯)和4,4′-联苯二酚的质量浓度分别在0.03～0.40mg·L^-1和0.3～4.0mg·L^-1内与峰面积呈线性关系,测定下限(10S/N)分别为0...     

一系列由柔性N,N''-双(3-吡啶甲基)胺构筑的螺旋配合物的合成、结构和性质

合成和表征了5个螺旋配位聚合物{[Cu(Hbpma)(H₂O)₄]₂(SO₄)₃·3.5H₂O}_n (1)、{[Ni(Hbpma)(H₂O)₄]₄(SO₄)₆·10.75H₂O}_n (2)、{[Mn(Hbpma)(H₂O)4](SO₄)_1.5·3H₂O}_n (3)、{[Zn(Hbpma)(H₂O)₄]₄(SO₄)₆·4H₂O·4CH₃OH}_n (4)和{[Cu(Hbpma)2(H₂O)₂](SO₄)2·9H₂O}_n (5),其中bpma代表N,N'-双(3-吡啶甲基)胺。晶体结构分析表明配合物1~4为一维链状结构,配合物5为二维层状结构,其中金属离子由质子化的bpma配体桥连。值得注意的是,采取反-反式构象的柔性bpma配体使得配合物1和2为假螺旋链结构,配合物3和4为螺旋链结构,配合物5为螺旋层结构。同时研究了配合物的磁性和热稳定性。     

1H-3-(3-吡啶基)-5-(3''-吡啶基)-1,2,4-三唑的钴(Ⅱ)配合物的合成、晶体结构、热稳定性及配体的DFT计算

合成了一个多功能的配体1H-3-(3-吡啶)-5-(3'-吡啶)-1,2,4-三唑(3,3'-Hbpt,1)并得到了配体的晶体结构,运用DFT理论计算了配体的最优构型、优势构象和电荷分布。在此基础上,水热合成了一个配位化合物:[Co(3,3'-Hbpt)₂(H₂O)₄]·(ad)·6H₂O(2)(ad=己二酸),结构分析表明配合物2是零维单核化合物,它的三维超分子结构是由分子间氢键连接而成,其中包含着由游离的己二酸分子填充的矩形孔道。值得注意的是,配体在配合物中的几何结构和构象与理论计算的结果一致。另外,利用热重分析研究了配合物2的热稳定性。     

以T型三羧酸配体构筑的具有2D→3D穿插结构的金属有机框架的合成、结构及性质

采用溶剂热合成法,利用T型三羧酸配体3,4',5-联苯三羧酸(H₃BPT=biphenyl-3,4',5-tricarboxylicacid)制备并表征了2个2D→3D穿插结构的金属有机框架结构,{[Ni₃(BPT)₂(bpe)₂(H₂O)₆]·2DMF·7H₂O}_n(1)和{[Ni₃(BPT)₂(bpea)₂(H₂O)₆]·2DMF·5H₂O}_n(2)(bpe=1,2-bis(4-pyridyl)ethylene,bpea=1,2-bis(4-pyridyl)ethane,DMF=N,N-dimethylformamide)。在这2个化合物中,BPT配体和含氮配体bpe或bpea共同连接相邻的Ni(Ⅱ)中心,形成(3,4)-连接的(63)(65.8)二维双层结构。相邻双层结构间相互穿插,形成具有聚轮烷结构的2D→3D互锁结构。气体吸附性质表明,化合物1对CO₂和N₂具有一定的吸附能力。     

甲氧基多溴联苯醚色谱相对保留时间的QSRR研究

基于有机化合物定量结构与色谱相对保留时间的关系,对26个甲氧基多溴联苯醚化合物进行了B3LYP/6-31G*水平上的结构优化,并在优化结构基础上进行了分子连接性指数和量子化学结构参数的提取。应用SPSS统计软件对甲氧基多溴联苯醚化合物的色谱相对保留时间与分子连接性指数进行了多元线性回归(MLR)。结果表明,三阶类分子连接性指数可以很好地表达甲氧基多溴联苯醚化合物色谱相对保留时间与结构描述符之间的定量关系。用外部测试集的方法对模型预测能力进行了验证,结果表明:所建立的QSRR模型具有较强的稳健性和预测能力。