新型BT-BMT-xBNT无铅高储能密度陶瓷研究

本文采用传统固相反应法,成功制备了新型无铅弛豫铁电陶瓷(1-x)[0.9BaTiO₃-0.1Bi(Mg_0.25Ta_0.5)O₃]-xBi_0.5Na_0.5TiO₃。结果表明,较高居里温度的Bi_0.5Na_0.5TiO₃的引入,使得材料体系中建立了更多的以Bi—O耦合为主的极性纳米区域,弥补了因Bi(Mg_0.25Ta_0.5)O₃的加入导致的宏观极化强度的减少,提高了材料的饱和极化强度,实现了较高储能密度的同时具有更好的温度稳定性。在245 kV/cm电场强度下,x=0.2样品的储能密度约为4.01 J/cm³,储能效率约为84.86%,同时该组分在20~170 ℃储能密度的变化率小于5%,储能效率的变化率小于6%,表现出优异的温度稳定性。     

Intermetallic Pt2Si：magnetron-sputtering preparation and electrocatalysis toward ethanol oxidation

Although most transition metals have been tested as the promoter to Pt for electrocatalysis toward fuel cell reactions,semi-conductor elements,such as Si,have hitherto not been examined.Here we report a simple synthesis of intermetallic Pt2Si electrode using magnetron sputtering and the electrocatalysis toward ethanol oxidation reaction（EOR）.In comparison to Pt,the intermetallic Pt2Si surface turns out to be much more active in catalyzing the EOR：the onset potential shifts negatively by 150 mV,and the current density at 0.6 V increases by a magnitude of one order.Such an enormous enhancement in EOR catalysis is ascribed to the promotion effects of Si,which can not only provide active surface oxygenated species to accelerate the removal of COads,but also strongly alter the electronic property of Pt,as clearly indicated by the core-level shift in XPS spectrum.     

Tracking problem under a time-varying topology

This paper studies the multi-agent tracking problem of a third-order maneuvering target under uncertain communication environments. Each tracking agent is assumed to be a third-order system and can only use its own and neighbors＇ position, velocity, and acceleration information to design its control input. In this work, the uncertain communication environments are modelled by a finite number of constant Laplacian matrices together with their corresponding scheduling functions. Sufficient conditions for the existence of a tracking strategy have been expressed in terms of the solvability of linear matrix inequalities. Finally, a numerical example is employed to demonstrate the effectiveness of the proposed tracking strategy.     

邻苯碳醌在有机合成中的应用

邻苯碳醌(o-QDM)是一种高反应活性的瞬态物种,较系统地介绍了它的结构、性质、产生方法,及在有机合成中的应用.重点介绍了利用热反应、光化学反应、电化学反应以及过渡金属催化等产生邻苯碳醌物种的方法,同时还介绍了它们在合成苯并多环骨架,C60衍生物,类固醇激素和其他天然产物中的具体应用.     

Energy dissipation of a ring-like metal rubber isolator

Metal rubber （MR） is a kind of homogeneous poroelastic damping material made of metal wire. In this paper, by ana- lyzing the forces on the MR isolator and the MR element, the hysteresis loops of the force and deformation are studied and verified by experiments. The results show that the force and displacement hysteresis loop of the MR isolator is described by the force and deformation hysteresis loops of the MR elements. In addition, the relationship between the energy dissipation coefficient of the MR element and that of the MR isolator is derived. The energy dissipation coefficient is programmed and calculated by MATLAB using experimental data, and the results are compared with the theoretical value. It is the basis for the design and applied research of the MR isolator in a future study.     

Energy spectrum of multi-radiation of X-rays in a low energy Mather-type plasma focus device

The multi-radiation of X-rays was investigated with special attention to their energy spectrum in a Mather-type plasma focus device （operated with argon gas）. The analysis is based on the effect of anomalous resistances. To study the energy spectrum, a four-channel diode X-ray spectrometer was used along with a special set of filters. The filters were suitable for detection of medium range X-rays as well as hard X-rays with energy exceeding 30 keV. The results indicate that the anomalous resistivity effect during the post pinch phase may cause multi-radiation of X-rays with a total duration of 300 ± 50 ns. The significant contribution of Cu-Kα was due to the medium range X-rays, nonetheless, hard X-rays with energies greater than 15 keV also participate in the process. The total emitted X-ray energy in the forms of Cu-K and Cu-K/3 was around 0.14 ± 0.02 （J/Sr） and 0.04 ±0.01 （J/Sr）, respectively. The total energy of the emitted hard X-ray （〉 15 keV） was around 0.12± 0.02 （J/Sr）.     

古老星系发现宇宙间最早的氧

正根据最新的研究,一个已知最古老的星系中存在最早的氧。这个命名为SXDF-NB1006-2的巨大星团位于距地球131亿光年处,2012年被发现时曾荣膺当时已知最古老星系(这一记录后来已被刷新数次)。在发现之初,天文学家就观测到一个电离氧形成的环,来自星系恒星的辐射能量足以将该处空间原子的电子剥离。现在,来自该星系的特殊红外波长表明这里存在失去两个电子的氧原子,研究者在《科学》(Science)网络版上做了报告。因为重于氢、氦和锂的元素,都是在恒星核聚变反应中产生,然后通过超新星爆发散布到宇宙空间中     

金催化剂上脂肪族硝基化合物与醛在氢气中选择还原耦合

采用TiO2上高度分散的金纳米粒子做催化剂，从脂肪族硝基化合物、醛和氢气可高选择性合成硝酮。与碳负载Pt催化剂相比，该催化体系上硝酮的选择性从50%增加到90%。其催化性能可有活性位结构、载体特性和反应条件精确调节。     

优化MGM(1,n)模型及其应用研究

从最小二乘估计的适用条件出发,在建立MGM(1,n)模型前,先采用BoxCox变换对原始数据进行变换,以解决或缓解误差项的正态性偏离问题.首先,以模型拟合平均误差最小化为目标,建立非线性优化模型,在参数的置信区间内,应用PSO(Particle Swarm Optimization)算法求最优解.然后,应用求解得到的参数,建立优化MGM(1,n)模型.在实例分析中,将优化MGM(1,n)模型应用于深基坑围护结构变形预测,实验结果表明通过对原始数据做合适的Box-Cox变换,能够有效提高模型的拟合及预测精度,拓广多变量灰色预测模型的适用范围.     

金微/纳颗粒阵列的SERS效应研究

表面增强拉曼散射(surface-enhanced Raman scattering,简称为SERS)能够提供有机分子的指纹特征信息,且具有灵敏度高和响应时间快等优点,是一项具有发展前景的分析技术。纳米结构SERS基底是获得SERS信号的关键。本文利用简便的电沉积方法在硅片上制备大面积的金微/纳颗粒阵列。金纳米颗粒之间存在大量狭小的纳米间隙,在光激发下产生大量的SERS"热点",从而具有很高的SERS灵敏度。而且,这种金微/纳结构具有高结构稳定性和化学稳定性。该结构对浓度低至10-12 M的罗丹明6G(R6G)具有很高的SERS灵敏性,且具有很好的SERS信号均匀性。利用这种微/纳结构阵列SERS基底,实现对水中低浓度农药甲基对硫磷的成功检测。这表明我们制备的金微/纳颗粒阵列在检测环境中的毒性有机物污染物方面具有潜在的应用前景。