两个基于4-(1H-1,2,4-三氮唑)苯甲酸的稀土配位聚合物的合成、晶体结构及荧光性质(英文)

以4-(1H-1,2,4-三氮唑)苯甲酸为配体,采用水热法合成了2种稀土配位聚合物[Tb(tbc3)(H2O)3]n(1)和{[Nd(tbc3)(H2O)3]·H2O}n(2)(Htbc=4-(1H-1,2,4-三氮唑)苯甲酸)。运用X-射线单晶衍射法对该配位聚合物进行了结构测定,并对其进行了元素分析、红外光谱、TG及荧光光谱表征。单晶结构表明,配位聚合物1为三斜晶系,空间群P1,配位聚合物2属于单斜晶系,空间群为P21/c。配位聚合物1和2均为一维链结构,均通过非共价键作用形成三维超分子构造。     

N-Protection of amines using pyridinium 2, 2, 2-trifluoroacetate ionic liquid as an efficient and reusable catalyst

A simple, green, and efficient method for the N-tert-butoxycarbonylation of amines by pyridinium 2,2,2- trifluoroacetate （[Py][OTf]） as an efficient and reusable catalyst is reported. In general, electron donating groups on aryl group give rise to the higher yields than electron withdrawing groups. Clean reaction, short reaction times, high yields, reusability of catalyst, and easy preparation of it are some advantages of this work.     

两个由2,3,5-吡啶三酸构筑的三维网状配位聚合物的合成、晶体结构和性质研究

2,3,5-吡啶三酸在水热条件下分别与Mn(CH3COO)2·4H2O和Co(CH3COO)2·4H2O反应,得到了2种金属有机骨架(MOFs)配合物[Mn1.5(2,3,5-pta)(H2O)4]n(1)和[Co1.5(2,3,5-pta)(H2O)4]n(2),其中2,3,5-H3pta=2,3,5-吡啶三酸。利用元素分析、红外、热重和X-射线单晶衍射分析进行了表征。分析结果表明2个配合物属于同构晶体:晶系为单斜,空间群为P21/c,其中,吡啶三酸配体完全脱去3个质子,并分别与4个六配位的金属离子相连,在空间形成一种三维网络状结构。热重分析表明,配合物1的稳定性要高于配合物2。     

系列含4,5-二氮杂-9,9′-螺二芴配体的钌配合物的合成及其性能研究(英文)

合成了3个钌髤配合物,[Ru(bpy)2(SB)](PF6)2、[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2(bpy=2,2′-bipyridine,SB=4,5-diaza-9,9′-spirobifluorene),通过核磁和元素分析对配合物的结构进行了确定。[Ru(bpy)2(SB)](PF6)2通过X射线单晶衍射确认了结构。研究了配合物的光物理性能。结果表明[Ru(bpy)2(SB)](PF6)2在乙腈中的发桔红光,波长为606 nm,量子产率约为0.001 2。在同样条件下[Ru(bpy)(SB)2](PF6)2和[Ru(SB)3](PF6)2的发光非常微弱甚至几乎没有发光。还研究了这些配合物的电致化学发光性能。随着配体中SB含量的增加,发光的峰电压从1.36 V增加到1.58 V,相对发光强度从731降低到52。     

Potassium phthalimide： An efficient and green organocatalyst for the synthesis of 4-aryl-7-（arylmethylene）-3,4,6,7-tetrahydro-1H- cyclopenta[d]pyrimidin-2（5H）-ones]thiones under solvent-free conditions

An efficient synthesis of Biginelli-type compounds using potassium phthalimide as a green, mild, and commercially available organocatalyst in a one-pot, multi-component cyclocondensation reaction of cyclopentanone, aldehydes, and urea/thiourea is reported. The present methodology is a green approach to access 4-aryl-7-（aryImethylene）-3,4,6,7-tetrahydro-1H-cyclopenta[d]pyrimidin-2（5H）-ones/thiones. It offers several merits such as simple operational procedures, no use of hazardous organic solvents, and cheap and environmentally friendly solid basic catalyst.     

One-pot synthesis of various xanthene derivatives using ionic liquid 1, 3-disulfonic acid imidazolium hydrogen sulfate as an efficient and reusable catalyst under solvent-free conditions

In this study, 1,3-disulfonic acid imidazolium hydrogen sulfate （DSIMHS） is used as an efficient and reusable ionic liquid for the green, mild, and efficient synthesis of xanthenes under solvent-free conditions. Simple and easy work-up, low cost, green process, short reaction times and excellent yields of the products are the advantages of this procedure. Further, the catalyst can be recycled and reused at least for four times without a noticeably decrease in its catalytic activity.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

Synthesis of cyclopentenyl and cyclohexenyl ketones via [3 + 2] and [4 + 2] annulations of 1,2-allenic ketones简

In this paper, an efficient synthesis of cyclopentenyl ketones and cyclohexenyl ketones through tertiary phosphine catalyzed [3 ＋ 2] and [4 ＋ 2] annulations of 1,2-allenic ketones with activated alkenes has been developed. Compared with published synthetic methods on cyclopentenyl ketones and cyclohexenyl ketones, the protocols developed in this paper have the advantages such as readily available starting materials, mild reaction conditions and high efficiency.     

基于反应性两嵌段共聚物的刺激响应性有机/无机杂化囊泡的制备及性能研究

采用ATRP法制备了结构明确的两亲性嵌段共聚物聚[甲基丙烯酸(N,N-二甲氨基)乙酯-b-甲基丙烯酸(3-(三甲氧基硅基))丙酯],其在甲醇/水的混合溶液中自组装形成囊泡结构,并通过甲基丙烯酸[3-(三甲氧基硅基)]丙酯链段中三甲氧基硅基的水解交联,形成了稳定的共聚物囊泡结构。用光散射、SEM和TEM对囊泡的结构进行了表征。所得共聚物囊泡粒子具有温度和pH双重响应性,通过简单调控温度或pH值来实现囊泡粒子的溶解与沉淀收集,可用于蛋白质等的分离与纯化。