Synthesis of dimethyl ether from methane mediated by HBr (Special column of methane transformation, Article)

Dimethyl ether (DME) was synthesized from methane through a two-step process, in which CH₃Br was prepared from the oxidative bromination reaction of methane in the presence of HBr and oxygen over a Rh-SiO₂ catalyst and then, in the second step, CH₃Br was hydrolyzed to DME over a silica supported metal chloride catalyst. 12 mol%ZnCl₂/SiO₂ catalyst was found to be the most active, but it deactivated because of Cl⁻ losing.     

Catalytic Ignition of Light Hydrocarbons

Catalytic ignition refers to phenomenon where sufficient energy is released from a catalytic reaction to maintain further reaction without additional extemai heating. This phenomenon is important in the development of catalytic combustion and catalytic partial oxidation processes, both of which have received extensive attention in recent years. In addition, catalytic ignition studies provide experimental data which can be used to test theoretical hydrocarbon oxidation models. For these reasons, catalytic ignition has been frequently studied. This review summarizes the experimental methods used to study catalytic ignition of light hydrocarbons and describes the experimental and theoretical results obtained related to catalytic ignition. The role of catalyst metal, fuel and fuel concentration, and catalyst state in catalytic ignition are examined, and some conclusions are drawn on the mechanism of catalytic ignition.     

含锆和钕激光介质废液的回收处理

研究了POCl3-ZrCl4-Nd(CF3COO)3激光体系废液中锆和钕的回收方法,蒸馏回收POCl3后的废渣与碳酸钠溶液反应,其中的钕转化为碳酸钕沉淀,用盐酸溶解并将其中不溶的磷酸锆滤出,再用草酸沉淀,灼烧后得到氧化钕,其中未检测出锆;碳酸锆的络合物在加入9mol/LHCl后析出白色氯氧化锆,经重结晶后,所得氯氧化锆中钕的含量小于0.05%.     

Isoquinolinium bromochromate： An efficient and stable reagent for bromination of hydroxylated aromatic compounds and oxidation of alcohols

The new chromium(Ⅵ) oxidizing reagent isoquinolinium bromochromate(IQBC) was prepared and characterized.The IQBC has been found to be stable and an efficient solid reagent which can be easily prepared in good yield.It act as an efficient brominating reagent for hydroxylated aromatic compounds as well as good oxidizing reagent for the conversion of alcohols to carbonyl compounds in good to excellent yield.The synthesized isoquinolinium bromochromate is more ideal reagent,with number of specification inclu...     

含1,4-二烯结构单元的多取代烯丙醇的合成

通过1-对甲苯磺酰基-1-己炔、烯丙基溴化镁和醛的三组分Michael-Aldol串联反应,一锅法合成了6个新的含1,4-二烯结构单元的多取代烯丙醇类化合物,其结构经1H NMR, IR和HR-MS表征.     

3,4-双(3,′5′-二硝基苯-1′-基)氧化呋咱的合成

设计并合成了新化合物3,4-双（3′,5′-二硝基苯-1′-基）氧化呋咱（4）。以苯甲腈为起始原料,经加成、重氮化、分子间二聚得到3,4-二苯基氧化呋咱（3）,3经HNO3／H2SO。硝化合成了4,其结构经^1H NMR,IR和元素分析表征;初步考察了加成、重氮化、缩合环化、硝化等反应的主要影响因素,确定了适宜的反应条件。     

集合与简易逻辑

1．重点、难点、热点分析 重点：集合、子集、交集、并集、补集、空集等概念,元素与集合、集合与集合之间的关系．集合的运算;含有绝对值的不等式、一元二次不等式的解法,二次不等式、二次方程和二次函数之间的联系与应用;逻辑联结词“或、且、非”及简单命题、复合命题等概念的理解．命题真假的判断与应用．四种命题及其关系;充分条件、必要条件、充要条件的概念及两命题间充要关系的判断与证明．     

醋酸铜热解制备无氯Cu2O/AC催化剂及其催化氧化羰基化

以醋酸铜为前驱物, 采用浸渍法负载后进行热处理使醋酸铜热解, 获得了负载型无氯Cu2O/AC(活性炭)催化剂, 并通过催化甲醇直接气相氧化羰基化合成碳酸二甲酯(DMC). 在氮气和惰性气体气氛下, 一水合醋酸铜Cu(CH3COO)2·H2O在30~450 ℃范围内产生3个失重过程, 其中在150~300 ℃范围内Cu(CH3·COO)2热解生成Cu2O; 而在300~450 ℃范围内生成单质Cu. 在200~350 ℃范围内, 将Cu(CH3COO)2·H2O/AC加热处理4 h后, 催化剂上逐步形成了Cu2O, 到350 ℃时, 水合醋酸铜几乎全部转化为Cu2O, 并有极少量单质Cu形成. 在300~350 ℃热处理4 h后, 催化剂中铜主要以Cu2O形式存在, 并表现出良好的氧化羰基化催化活性. 在n(CO)∶n(MeOH)∶n(O2)=4∶10∶1及SV=5600 h-1条件下, 于300 ℃热处理4 h所制备的催化剂的甲醇转化率达到6.21%, DMC的时空收率为128.16 mg·g-1·h-1, 选择性为64.26%.     

表面活性剂对3-甲基吡啶电氧化制取烟酸的影响

研究了在阳极液中加入不同类型和不同浓度表面活性剂对3-甲基吡啶电氧化的影响. 结果表明, 十六烷基三甲基溴化铵、脂肪醇聚氧乙烯醚硫酸钠、十二烷基苯磺酸钠、十二烷基二甲基甜菜碱和山梨醇酐单硬脂酸酯的胶团对3-甲基吡啶电氧化有明显的促进作用. 实验结果还表明, 在低浓度的硫酸为支持电解质阳极液中加入表面活性剂与不加表面活性剂相比, 3-甲基吡啶电氧化制取烟酸的选择性和电流效率明显提高.     

超声强化过氧化氢/三氯乙酸催化氧化柴油深度脱硫研究

选择H₂O₂一三氯乙酸作为催化氧化脱硫反应体系,砜类氧化产物用极性溶剂从柴油中萃取分离,研究了剂油体积比、有机酸用量、氧化反应温度、氧化反应时间等工艺参数对脱硫率的影响。在此基础上,引入功率超声为反应提供能量,并考察了超声频率、超声功率、超声时间等因素对脱硫效果的影响,从而确定最佳操作条件为,反应温度70℃,反应时间60min,三氯乙酸与过氧化氢体积比为1∶1,氧化剂与柴油体积比为1∶10,超声频率40kHz,超声功率200W,超声时间30min。萃取后柴油脱硫率可达97.5%,脱硫油收率94.0%。