毛细管电色谱分离对映体的研究进展

本文系统评述了毛细管电色谱（ＣＥＣ）分离分析对映体的发展状况,引用文献３５篇。     

侧链含氨基的聚(对亚苯基亚乙炔基-对亚苯基-咔唑)三元共聚物的合成及其聚集态下荧光特性

通过Sonogashira偶联反应制备了含有4-[2-(对苯胺)乙烯基]苯(M1)、2,5-二戊烷氧基-1,4-二乙炔基苯(M2)和9-辛基咔唑(M3)3种结构单元的三元共轭聚合物PPEC,并通过核磁共振氢谱确定了3种结构单元的比例为0.54∶1.00∶0.46(M1∶M2∶M3).由于在PPEC的侧链中含有氨基基团,通过在PPEC的THF溶液中分别加入水、甲醇和正己烷,诱导其产生聚集,其聚集后的荧光性质表现出明显的不同,在THF与水的混合溶剂中,PPEC发光强度会随着水含量的增加先是急剧降低,而后在高水含量时发光强度又显著增强;在THF与甲醇的混合溶剂中,PPEC发光强度随着甲醇的加入只是逐渐降低;在THF与正己烷的混合溶剂中,PPEC的发光强度则会随着正己烷的增加而增强.该结果表明氨基通过与水,或者自身所形成氢键作用,改变了PPEC分子链之间的聚集态结构,降低了分子内旋转非辐射能量效率,从而有效改善共轭聚合物的主链发光性质,这为设计聚集态下(或固态下)高性能的荧光共轭聚合物提供了一种新思路.     

3″,3″-二甲基吡喃[3’,4’]2,4,2’-三羟基查尔酮的首次全合成

以2,4-二羟基苯乙酮和2,4-二羟基苯甲醛为起始原料,经过C-异戊烯基化、保护酚羟基、羟醛缩合、去保护基反应首次成功地完成了天然产物3″,3″-二甲基吡喃[3’,4’]2,4,2’-三羟基查尔酮的全合成,总产率18.4%,其结构经1H NMR,IR和MS表征。中间体8未见文献报道。     

3",3"-二甲基吡喃[3',4']2,4,2'-三羟基查尔酮的首次全合成

以2,4---羟基苯乙酮和2,4-二羟基苯甲醛为起始原料,经过C-异戊烯基化、保护酚羟基、羟醛缩合、去保护基反应首次成功地完成了天然产物3",3"-二甲基吡喃[3’,4’]2,4,2’-三羟基查尔酮的全合成,总产率18.4％,其结构经1H NMR,IR和MS表征.中间体8未见文献报道.     

A Search for Solar Axions and Anomalous Neutrino Magnetic Moment with the Complete Panda X-Ⅱ Data

We report a search for new physics signals using the low energy electron recoil events in the complete data set from PandaX-Ⅱ,in light of the recent event excess reported by XENON1 T.The data correspond to a total exposure of 100.7 ton·day with liquid xenon.With robust estimates of the dominant background spectra,we perform sensitive searches on solar axions and neutrinos with enhanced magnetic moment.It is found that the axionelectron coupling gAe<4.6×10^-12 for an axion mass less than 0.1 keV/c² and the neutrino magnetic moment μv<4.9×10^-11μB at 90%confidence level.The observed excess from XENON1 T is within our experimental constraints.     

Broad-band phase retrieval method for transient radial shearing interference using chirp Z transform technique

The transient radial shearing interferometry technique based on fast Fourier transform (FFT) provides a means for the measurement of the wavefront phase of transient light field. However, which factors affect the spatial bandwidth of the wavefront phase measurement of this technology and how to achieve high-precision measurement of the broad-band transient wavefront phase are problems that need to be studied further. To this end, a theoretical model of phase-retrieved bandwidth of radial shearing interferometry is established in this paper. The influence of the spatial carrier frequency and the calculation window on phase-retrieved bandwidth is analyzed, and the optimal carrier frequency and calculation window are obtained. On this basis, a broad-band transient radial shearing interference phase-retrieval method based on chirp Z transform (CZT) is proposed, and the corresponding algorithm is given. Through theoretical simulation, a known phase is used to generate the interferogram and it is retrieved by the traditional method and the proposed method respectively. The residual wavefront RMS of the traditional method is 0.146λ, and it is 0.037λ for the proposed method, which manifests an improvement of accuracy by an order of magnitude. At the same time, different levels of signal-to-noise ratios (SNRs) from 50 dB to 10 dB of the interferogram are simulated, and the RMS of the residual wavefront is from 0.040λ to 0.066λ. In terms of experiments, an experimental verification device based on a phase-only spatial light modulator is built, and the known phase on the modulator is retrieved from the actual interferogram. The RMS of the residual wavefront retrieved through FFT is 0.112λ, and it decreases to 0.035λ through CZT. The experimental results verify the effectiveness of the method proposed in this paper. Furthermore, the method can be used in other types of spatial carrier frequency interference, such as lateral shearing interference, rotational shearing interference, flipping shearing interference, and four-wave shearing interference.     

卟啉自组装超薄膜的制备及其在光电转换方面的研究*

卟啉及其衍生物的π电子共轭平面结构,使其具有独特的光电性能和良好的热稳定性,在仿生、催化、医学及材料科学等领域得到了广泛的应用。随着自组装技术的不断发展,其在制备功能化超薄膜方面表现出显著的优越性。本文重点介绍了卟啉及其衍生物自组装超薄膜的制备方法,并总结了近年来卟啉自组装膜在光电转换方面的研究进展。     

高比表面纳米二氧化钛胶体、多孔电极及DSC电池的制备

以钛酸四丁酯为前驱物,冰醋酸为水解抑制剂,浓硝酸为胶溶剂,结合溶胶-凝胶与水热处理法成功制备了具有高比表面积的纳米二氧化钛胶体.除水、酸后,浓缩并添加有机粘结剂制成了纳米TiO2浆料.刷制多孔电极并组成电池后测试了其光电特性.调整胶溶剂-浓硝酸的添加量,制备了具有不同颗粒大小、晶型、比表面积的TiO2纳米颗粒.为了提高多孔薄膜的光散射效应,在浆料中添加了400 nm TiO2粉体,研究了其掺入量对电池特性的影响.结果表明,当硝酸加入量为 1 mL、掺入20;大颗粒TiO2时,制备的电池效率达到4.19;(Jsc=8.32 mA/cm2, Voc=0.76 V, FF=66.31;).     

高锰酸钾加热分解过程研究

通过测量氧气产率,采用TGA(热重分析)和XRD(X-射线衍射)测试技术,对高锰酸钾加热分解过程进行了研究,提出高锰酸钾加热分解制取氧气的主要反应为6KMnO42K2MnO4+K2Mn4O8+4O2↑和KMnO4KMnO2+O2↑.按照该反应方程式的理论产气率为13.43%~20.15%,与实际产气率13%~19%十分吻合。     

基于耦合算法的三维复杂结构冲击动力学特性

光滑粒子流体动力学-有限元耦合算法（SPH-FEM）较好地结合了SPH和FEM的优势,近年来逐渐被引入冲击动力学相关问题研究中。然而早期的研究对象多为单一材料的简单结构,所取得的研究成果距离实际工程应用仍有一定差距。为此,在总结前人工作的基础上,对SPH-FEM耦合算法进行适当改进,通过引入复合材料损伤模型,对复合材料蒙皮结构飞行器舱段结构进行建模计算,分析其在爆炸冲击激励下的冲击动力学特性。将数值计算结果与试验结果进行对比分析,验证该算法和模型的有效性和准确性,初步实现SPH-FEM的工程实际应用。最后总结了复合材料蒙皮结构飞行器在爆炸冲击激励下的一系列结构动态响应规律,以期为航天飞行器结构设计与防护提供参考。