DRAG ON SUBMICRON NANOPARTICLE AGGREGATES

A new procedure was developed for estimating the effective collision diameter of an aggregate composed of primary particles of any size. The coagulation coefficient of two oppositely charged particles was measured experimentally and compared with classic Fuchs theory, including a new method to account for particle non-sphericity. A second set of experiments were performed on well-defined nanoparticle aggregates at different stages of sintering, i.e. from the aggregate to the fully sintered stage. Here, electrical mobility was used to characterize the particle drag. The aggregates are being built from two different size-fractionated nanoparticle aerosols, the non-aggregated particles are discarded by an electrofilter and then they are passed through a furnace at concentrations low enough not to induce coagulation.     

Ψ′→KSKL的首次观测及其物理应用

利用北京谱仪采集的 1400万Ψ′数据,对粲偶素衰变到赝标介子对KSKL进行了寻找,首次观测到信号并测量了其衰变分支比,并首次确定Ψ′衰变中强振幅和电磁振幅之间的相角接近±90°.结合从北京谱仪采集的J/Ψ数据中测得的J/Ψ→KSKL的分支比,确定了Ψ′→KSKL相对于微扰量子色动力学“12%”规则的反常增强,对粲偶素的衰变机制研究提出了新的挑战.     

超临界流体制备微发泡聚合物材料的研究进展

以超临界流体为物理发泡剂制备的微发泡聚合物材料具有小的泡孔尺寸和高的泡孔密度,从而赋予材料优异的性能.本文首先阐述了微发泡聚合物材料的制备原理,以及聚合物微发泡过程中泡孔形成的四个阶段;基于这些认识,针对微发泡聚合物材料泡孔形态的改善,即增加泡孔密度、减小泡孔尺寸以及均化泡孔尺寸分布,从加强泡孔成核、控制泡孔增长的角度综述了近年来的研究进展;最后对如何有效控制泡孔形态提出了建议,并对微发泡聚合物材料的应用前景进行了展望.     

渐变折射率波导传播特性微扰计算的代数递推公式

应用量子力学的超位力定理（HVT）和赫尔曼－费恩曼（Hellmann-Feynman）定理（HFT），导出了用微扰法计算渐变折射率平面波导传播常数各级近似值的代数递推公式，并给出了由传播常数近似值计算模场近似表达式的代数式。计算了几个典型实例，此法的特点是便于直接计算任意级近似的传播常数及模场分布，且可推广到二维波导的计算。     

F值函数的微分及其在FNN中的应用

本文引进了集值函数的ｓ－可微和模糊值（Ｆ值）函数的Ｆｓ－可微概念。给出了这两种可微性的几个判别条件。最后研究并得到了一类模糊神经网络（ＦＮＮ）的Ｆｓ－可微性和连续性。     

Flow Structures Around Micro-bubbles During Subcooled Nucleate Boiling

The flow structures were investigated around micro bubbles on extremely thin wires during subcooled nucleate boiling.Jet flows emanating from the bubbles were observed visually with the fluid field measurement using high-speed photography and a PIV system.The jet flows induced a strong pumping effect around a bubble.The multi-jet structure was further observed experimentally, indicating the evolution of flow structure around micro bubbles.Numerical simulations explore that the jet flows were induced by a strong Marangoni effect due to high temperature gradients near the wire.The bubble interface with multi-jet structure has abnormal temperature distribution such that the coolest parts were observed at two sides of a bubble extending into the subcooled bulk liquid rather than at the top.Evaporation and condensation on the bubble interface play important roles not only in controlling the intensity of the jet flow,but also in bringing out the multi-jet structure.     

Multi-Phase Flow and Heat Transfer of a Micro-Pump Thermally Driven by a Multi-Output Pulse Laser

We present an experimental study of multi-phase flow and heat transfer in a micro-tube induced by a multi-output pulse laser. Extensive flow and heat transfer measurements and visualization experiments have been carried out to characterize the micro-pump behaviour under various conditions. The experiments reveal extremely unsteady and complex flow patterns in the micro tube with the flow closely related with generation and collapse of bubbles.It is found that the flow rates are controlled by the heating and condensation conditions within the tube. The laser pulse duration, pulse interval and output-power as well as the tube diameter all show a strong influence on the flow rate of the micro-pump. This study provides a basis for the design of thermally-driven micro-pump induced by a pulsed laser beam.     

导电聚合物与锂二次电池

本文对聚合物的锂二次电池原理，发展、应用前景及今后的展望做了评述．